Owner`s manual

19
HR7012 REAR SEAT VIDEO HEADREST SYSTEM Owner’s Manual
REMOTE CONTROL OPERATION (continued)
25. VOLUME DOWN ( - ) or UP ( + )
Used to adjust the volume on wired
Headphones (HR7012MA and HR7012S
only).
26. MUTE (
)
Press this button to mute the sound
transmitted to the headphones and the
FM Modulator. “MUTE” will be displayed
on the screen. Pressing the button
again restores sound to the previously
set level. (Figure 16)
27. DISC MENU
Press this button to access the
DVD root menu. Press again
to resume playing the movie.
In photo mode, press once for a
thumbnail view. Press and hold 3 to 4
seconds to go to the Directory/ Preview
modes. (Figure 16)
28. STOP (
)
Press this button to stop playback of
disc. (Figure 16)
29. PAUSE (
)
Press this button to pause the playback
of a disc. Pressing pause again or
pressing the Play button will resume
normal playback. (Figure 16)
30. DVD Source
This button is only active when the
remote control is in the DVD mode and
a USB device is connected. This button
is used to switch between sources (DVD
and USB). (Figure 16)
31. DVD Mode Select
Press this button to control DVD
functions. (Figure 16)
32. EJECT (
)
Press this button to eject the disc from
the disc slot. (Figure 16)
17. SUB-T (DVD MODE ONLY)
If the DVD playing has dierent
subtitle options, press this button to
display and select the desired available
subtitle language. (Figure 16)
NOTE: The subtitle selections vary from
disc to disc.
18. ZOOM
Press this button to enlarge the
picture when playing a DVD disc. Press
repeatedly to change the zoom from
Zoom 2, Zoom 3, Zoom 4, Zoom 1/2,
Zoom 1/3, Zoom 1/4 and Zoom OFF.
(Figure 16)
19. AUDIO (DVD MODE ONLY)
Press this button to display and select
the available AUDIO languages. Each
time you press the button, the audio
language changes. (Figure 16)
NOTE: The audio languages vary from
disc to disc.
20. NUMBERS
Allows the user to select tracks on a
disc during playback or changing the
parental control. (Figure 16)
21. FM Modulator Channel Select (C)
(M1 Monitor only)
Press this button to display the available
FM modulator frequencies. (Figure 16)
22. FMM ON/OFF (
) (M1 Monitor only)
This button is used to turn the wireless
FM Modulator ON and OFF. (Figure 16)
23. IRT ON/OFF
This button is used to turn the Infrared
Transmitter ON and OFF for the Wireless
IR Headphones. Pressing M1 then the
IRT ON/OFF button will control the IR
Transmitter for M1. Pressing M2 then
the IRT ON/OFF button will control the IR
Transmitter for M2. (Figure 16)
24. PIX
This button is used to make picture
adjustments. Use the UP or DOWN
direction buttons to select BRIGHTNESS,
CONTRAST, COLOR, TINT, or RESET. Use
the UP or DOWN buttons to adjust the
setting. The OSD will automatically
disappear if no adjustments are made
within 6 seconds. (Figure 16)