Owner`s manual

HR7012 REAR SEAT VIDEO HEADREST SYSTEM Owner’s Manual

PICTURE CONTROL

PICTURE CONTROL from the Front Panel (M1 and M2) (Figure 22):

1. Press and hold the MENU/SELECT button on the front panel of the system (Figure 19) for

3 to 5 seconds to show the System Menu. (Figure 22)

2. Use the UP/DOWN direction buttons to select Picture Control and press the Menu/Select

button to enter the sub-menu.

3. Use the UP or DOWN direction buttons to select one of the ve selections

in the Sub-Menu (Brightness, Contrast, Color, Tint and Reset). Using the

LEFT/RIGHT direction buttons, adjust the level of the picture setting chosen.

NOTE: Levels are set from “0” to “32” for Brightness, Contrast and Color. The levels for Tint

is set from “-16” to “+16” . No Tint Control in PAL Mode.

4. After level setting(s) are made, the Picture Control sub-menu will automatically disappear

from main screen within 5 or 6 seconds, or press the Menu/Select button again to return

to the System Menu.

5. Select RESET to return picture setting controls back to factory default.

PICTURE CONTROL from the Remote Control:

1. Select “M1” or “M2” and press the PIX button to select Picture Control.

2. Use the UP/DOWN direction buttons to select one of the ve selections in the Sub-Menu

(Brightness, Contrast, Color, Tint and Reset). Using the LEFT/RIGHT direction buttons,

adjust the level of the selected picture setting. NOTE: Levels are set from “0” to “32”

for Brightness, Contrast and Color. The levels for Tint is set from “-16” to “+16”. No Tint

Control in PAL Mode.

3. After level setting(s) are made, the Picture Control sub-menu will automatically disappear

from main screen within 5 or 6 seconds, or press the PIX button again.

4. Select RESET to return the picture setting control back to factory defaults.

(HR7012S)

(HR7012MA)

Figure 22

SYSTEM SETUP SUBMENUS (continued)

NOTE: Picture control settings for DVD

mode are separate from the other A/V

sources. After adjusting the DVD picture

controls, the user can make separate

settings for the other A/V sources.

(HR7012D)