Owner`s manual

2
HR7012 REAR SEAT VIDEO HEADREST SYSTEM Owner’s Manual
CONGRATULATIONS
The HR7012 Rear Seat Video Headrest
System has two factory matched replacement
headrests with 7” video monitors in each
headrest. The monitors are hereafter
referred to in this manual as “M1” and “M2”
The M1 and M2 monitors are equipped with
easy to use front panel controls and auxiliary
input connection options.
The system allows the users to watch the
same DVD or video source on both monitors
simultaneously or allows individual viewing
of content.
The HR7012 monitor is available in three
models, HR7012MA, HR7012D and HR7012S.
These three models can be congured to
allow six possible combinations, which are
detailed on pages 3 and 4. Below are the
details for each monitor:
HR7012MA: is a 7” LCD monitor with a
built-in DVD player that allows the user
to select from several sources (DVD/
USB, M1 (M2), A/V-IN, AUX MEDIA,
and GAME* Source). The monitor has
a built-in infrared audio transmitter
channel.
HR7012S: is a 7” LCD monitor (No DVD)
that allows the user to select from
several sources (M1 (M2), A/V-IN, AUX,
and GAME* Source). The monitor has
a built-in infrared audio transmitter
channel.
HR7012D: is a 7” LCD monitor with
a built-in DVD player that allows the
user to select from several sources
(DVD/USB, HDMI/MHL, M1 (M2), A/V-
IN, and GAME* Source). The monitor
has a built-in infrared audio transmitter
channel.
* GAME Optional
Thank you for purchasing the HR7012 Rear Seat Video Headrest System. Before operating this
system read this manual thoroughly and retain it for future reference.
The HR7012 Rear Seat Video Headrest
System is set up and adjusted with easy to
use menus that are accessed using the front
panel controls or the remote controls.
The two-channel wireless Infrared (IR)
headphones have an A-B switch that allow
the users to select the audio from either M1
on “CH A” or M2 on ”CH B”
• The M1 monitor will only respond to
the remote control when the Monitor
Select “M1” button is pressed.
• The M2 monitor will only respond to
the remote control when the Monitor
Select “M2” button is pressed.
(Optional wired headphones allow the user
to listen to audio from the system through
the 1/8” jack located on the front of the
HR7012MA and HR7012S. The HR7012D
does not have a wired headphone jack)
Patented, refer to www.voxxintl.com/company/patents