Owner`s manual

38
HR7012 REAR SEAT VIDEO HEADREST SYSTEM Owner’s Manual
Battery Installation
Before attempting to operate the Game
Controller, install the batteries as described
below:
1. Turn the game controller face down.
2. Using a Phillips head screwdriver,
remove the cover screw.
3. Use your nger to lift the battery cover
tab and remove the cover.
4. Install three “AAA” batteries. Make sure
that proper polarity (+ or -) is observed.
5. Align the cover tab with the game
controller and press down on the cover
tab until the cover locks.
6. Reinstall the cover screw.
CAUTION:
The Game Controller will go into a sleep mode
after 3 minutes if no buttons are pressed. Do
not store the game controller in a seat pocket
where the buttons may be inadvertently
pressed.
GAME CONTROLLER OPERATION  OPTIONAL
BATTERY COVER TAB
BATTERY COMPARTMENT
Back of the Game Controller
COVER SCREW
Figure 41
Functional Description
1. Use the START button to enter the games
list (1-54). Use the direction buttons to
move the arrow to the desired game.
Press the START button to select the
game. Use the SELECT button to exit to
the game list.
2. A Key: “A Function Key” activates the
jump function and optional weapons.
3. B Key: “ B Function Key” activates the re
and attack functions.
4. TA Key: TURBO “A” Function Key.
5. TB Key : TURBO “B” Function Key.
6. BACK Key: The Back key is used to return
to the previous page. While playing a
game pressing the Back key will return
to the games list. Pressing the Back key
again will return to the games main page
“54 Arcade Games”.
7. Press the START button to begin the
game. Press the START button again at
any time to pause the game.
NOTE: The LED power indicator will light only
when a game controller key is pressed.
Figure 42
UP
DOWN
LE FT
RIGHT
SELECTSTART
B
A
TB
TA
P1
STARTSELECT
DIRECTION
BUTTONS
LED-POWER
INDICATOR
A
TA
TB
BACK
B
CONTROLLER
I.D. (P1 or P2)
Front of the Game Controller