WVOS2TX Wireless (WiFi) Transmitter for Backup Monitoring on smart device via Voyager Vision Mobile App Supports Up to 2-Voyager Cameras (sold separately) Installation and Operation Manual W for ire Ba less ck (W up iF Mo i) T nit ran ori sm ng it te r
ASA ELECTRONICS LLC MOBILE APPLICATION TERMS & CONDITIONS AND END USER LICENSE AGREEMENT IMPORTANT: READ ALL INSTRUCTIONS AND WARNINGS CAREFULLY BEFORE DOWNLOADING, INSTALLING OR USING THE VOYAGER VISION WIRELESS CAMERA AND THE RELATED MOBILE APPLICATION Important Safety Information FAILURE TO FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE USING THE VOYAGER VISION WIRELESS CAMERA SYSTEM’S MOBILE APPLICATION/APP OR IMPROPER USE COULD RESULT IN SERIOUS PERSONAL INJURY, INCLUDING DEATH AND/OR PROPERTY DAMAGE.
(a) download and install the Application for your personal, non-commercial use on a single mobile device owned or otherwise controlled by you (“Mobile Device”) strictly in accordance with the Application’s documentation; and (b) use the Application in machine-readable form and its Content on a single Mobile Device. 2. License Restrictions.
9. Limitation of Liability.
WVOS2TX • INSTALLATION 1. Mount the transmitter using 4 screws in a safe location to avoid impacts. Note: The WVOS2TX is IPX6 waterproof and can be mounted in locations exposed to moisture. 2. Mount the transmitter in a position so that the antenna is vertical to the ground. 3. Connect 12 volts to the red wire and chassis ground to the black wire. 4. Connect the camera cables. Note: Cameras are sold separately. 5. Secure all wires & cables.
WVOS2TX • CONNECTING THE MOBILE APP Scan the QR Code on top of the WVOS2TX with your mobile device for a download link to the Voyager Vision app on the app store. Once the app is downloaded, go into Wi-Fi settings on device and search for available Wi-Fi Networks. The WVOS2TX will appear as an available Wi-Fi Network in the format of WVOS2TXXXXXXX. Once Selected, enter the password and press Join. The default password is 12345678.
WVOS2TX • HOME PAGE Once the app is open, the home page will appear. The home page has Camera 1 and 2 images, a Camera Icon, an Info icon, and a Settings icon. (Horizontal Screen) Note: First time opening the app and if the app is not connected with WVOS2TX Wi-Fi, the app screen will show blue screen with “No Signal. Check Wi-Fi.”.
WVOS2TX • SCREEN SHOT • INFO Press the Camera Icon to take a screenshot of the camera image. The screenshot will be stored in the internal memory of the device. Pressing the Info icon will bring up the Info page for the app. Press the X at the top left corner of the page to go back to the Home Page.
WVOS2TX • SETTINGS Press the Settings Icon to view the Settings Page. In the Settings page, the camera image that appears on the home screen can be selected.
WVOS2TX • SETTINGS CONT. The camera name can be edited and selected to show on the home page. The Camera image can be reversed.
WVOS2TX • SPECIFCATION • SETTINGS CONT. (SSID) • Power System : 12VDC • Operating Voltage Range: 10.8~16VDC • Power Consumption (MAX): 12VDC / 1.5A • Operation Temperature Range : 5 ℉ to 149 ℉ • Storage Temperature Range : -40 ℉ to 185 ℉ • Waterproof Rating : IPX6 • Overall Dimensions : 1.2" x 7.8" x 4.3" • Product Weight (unpackaged) : 9.2oz The SSID (Wi-Fi Network) Name can be edited. This will change how the WVOS2TX Wi-Fi name will appear when searching for available Wi-Fi networks.
WVOS2TX WVOS2TX not powering on: - Verify with a multi-meter there is +12V at the red power wire. - Verify with a multi-meter there is Ground at the black ground wire. No camera image: - Verify the camera extension cable (CEC) fully inserted into the camera input connector on the WVOS2TX. - Verify the camera is fully inserted into the camera extension cable. Forgot Password: If the Wi-Fi password is forgotten or an error happened when changing the SSID name, the WVOS2TX can be reset.
WVOS2TX • FCC NOTES WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Features and specifications subject to change without notice. For further technical support call: 1-877-305-0445 600-2300002-001 R x0.