User Manual

8
Pairing Instructions
Headset and Transmitter
The headset and transmitter are pre-paired out of the box. The instructions below are only necessary if pre-pairing
appears to have been lost.*
1. Headset should be powered OFF.
2. Press and hold Pairing button on the transmitter for 5 seconds until the LED Flashes rapidly. Release.
3. Press and hold Power button on the headset until the LED ashes rapidly. Release.
4. Once your Turtle Beach XP510 headset has been successfully paired, the Headset LED will blink once per second and
the transmitter LED will light solid.
dual band wireless
WiFi
5
GHz
* If pairing is unsuccessful on rst attempt, please try again. It may take as many as ve attempts to pair successfully.