SDS

ManualsBrandsVPI ManualsFlooring & Rugs#100 2-Part Epoxy Adhesive - 1 Gallon

Page 1 of 4 Revision Date: 3/27/2015

SAFETY DATA SHEET

1.0 IDENTIFICATION

1.1 GHS product identifier: VPI #100 Epoxy Adhesive, Part A

1.2 Other means of identification: Epoxy Resin

1.3 Recommended use of the chemical and restrictions on use: N/A

1.4 Manufactured for: VPI CORPORATION

3123 S. 9

STREET

SHEBOYGAN, WI 53081

INFORMATION PHONE NUMBER: 920-458-4664

1.5 Emergency phone number: 1-800-255-3924

2.0 HAZARDS IDENTIFICATION

2.1 Classification of the substance or mixture:

Acute Toxicity – Dermal 4, Skin Corrosion/Irritant 4, Eye Damage/Irritation 4, Acute Toxicity – Oral 4, Acute

Toxicity – Inhalation 4

2.2 GHS label elements:

Signal Word:

Warning

Hazard Statement: Harmful in contact with skin

Prevention: Wear protective gloves/protective clothing.

Response: If on skin: wash with plenty of soap and water. Call a poison center or

doctor/physician if you feel unwell. Immediately flush skin with plenty of water for at least 15

minutes while removing contaminated clothing and shoes. Call a physician if irritation persists.

Wash contaminated clothing before reuse.

Disposal: Dispose of in accordance with federal, state, and local regulations.

Signal Word:

Warning

Hazard Statement: Causes eye irritation

Prevention: Flush eyes thoroughly after eye contact.

Response: If in eyes: rinse cautiously with water for several minutes. Remove contact lenses, if

present and easy to do. Continue rinsing. If eye irritation persists: get medical advice/attention.

Signal Word:

Warning

Hazard Statement: Harmful if swallowed

Prevention: Wash hands thoroughly after handling. Do not eat, drink or smoke when using this

product.

Response: If swallowed: Call a poison center or doctor/physician if you feel unwell. Rinse

mouth.

Disposal: Dispose of in accordance with federal, state, and local regulations.

Signal Wor

Warning

Hazard Statement: Harmful if inhaled

Prevention: Avoid breathing dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-

ventilated area.

Response: If inhaled: remove victim to fresh air and keep at rest in a position comfortable for

eathing. Call a poison center or doctor/physician if you feel unwell.

2.3 Other hazards which do not result in classification: N/A

2.4 Hazards Material Information System (United States):

Health

Flammability

Physical Hazard

Hazard Codes: 0=Minimal Hazard, 1=Slight Hazard, 2=Moderate Hazard, 3=Serious Hazard, 4=Severe Hazard

3.0 COMPOSITION/INFORMATION ON INGREDIENTS

3.1 Mixtures

Chemical Identity

CAS No.

Concentration

Reaction

products

of epichlorohydrin and bisphenol

25085

Dipropylene Glycol

Diglycidyl Ether

41638

Miscellaneous, Non

hazardous Inert Fillers

N/A

Summary of content (8 pages)

PAGE 1
Page 1 of 4 Revision Date: 3/27/2015 SAFETY DATA SHEET 1.0 IDENTIFICATION 1.1 1.2 1.3 1.4 1.5 2.0 GHS product identifier: VPI #100 Epoxy Adhesive, Part A Other means of identification: Epoxy Resin Recommended use of the chemical and restrictions on use: N/A Manufactured for: VPI CORPORATION 3123 S. 9TH STREET SHEBOYGAN, WI 53081 INFORMATION PHONE NUMBER: 920-458-4664 Emergency phone number: 1-800-255-3924 HAZARDS IDENTIFICATION 2.1 2.
PAGE 2
Page 2 of 4 4.0 FIRST-AID MEASURES 4.1 4.2 4.3 5.0 6.2 Personal precautions, protective equipment and emergency procedures: Ventilate the area. Avoid breathing vapor. Use self-contained breathing apparatus or supplied air for large spills or confined areas. Methods and materials for containment and clean up: Contain spill if possible. Wipe up or absorb on suitable material and pick up with shovels. Do not use sawdust, wood chips, or other cellulosic materials to absorb the spill.
PAGE 3
Page 3 of 4 Revision Date: 3/27/2015 Miscellaneous, Non-hazardous Inert Fillers 8.2 8.3 9.0 N/A 35-45 None Established Appropriate engineering controls: N/A Individual protection measures, such as personal protective equipment: Respiratory Protection: Provide adequate ventilation. Avoid breathing of vapors or mists. Airborne concentrations should be kept to lowest levels possible. When exposures are not adequately controlled, use an approved respirator.
PAGE 4
Page 4 of 4 Revision Date: 3/27/2015 11.4 Numerical measures of toxicity: Ingredient Name CAS No. Reaction products of epichlorohydrin and bisphenol 25085-99-8 A Dipropylene Glycol Diglycidyl 41638-13-5 Ether Miscellaneous, Non-hazardous N/A Inert Fillers % Acute Oral LD50 Acute Dermal LD50 Acute Inhalation LC50 45-55 >5.0 g/kg 20.0 g/kg (rabbit) no deaths in sat'd air, 8 hr 10-15 >2.0 g/kg >2.0 g/kg >5.0 mg/L 35-45 Not available Not available Not available 12.0 ECOLOGICAL INFORMATION 12.
PAGE 5
Page 1 of 4 Revision Date: 6/1/2015 SAFETY DATA SHEET 1.0 IDENTIFICATION 1.1 1.2 1.3 1.4 1.5 2.0 GHS product identifier: VPI #100 Epoxy Adhesive, Part B Other means of identification: Polyamine Hardener Recommended use of the chemical and restrictions on use: N/A Manufactured for: VPI CORPORATION 3123 S. 9TH STREET SHEBOYGAN, WI 53081 INFORMATION PHONE NUMBER: 920-458-4664 Emergency phone number: 1-800-255-3924 HAZARDS IDENTIFICATION 2.1 2.
PAGE 6
Page 2 of 4 4.0 FIRST-AID MEASURES 4.1 4.2 4.3 5.0 6.2 Personal precautions, protective equipment and emergency procedures: Ventilate the area. Avoid breathing vapor. Use self-contained breathing apparatus or supplied air for large spills or confined areas. Methods and materials for containment and clean up: Contain spill if possible. Wipe up or absorb on suitable material and pick up with shovels. Do not use sawdust, wood chips, or other cellulosic materials to absorb the spill.
PAGE 7
Page 3 of 4 Revision Date: 6/1/2015 Respiratory Protection: Provide adequate ventilation. Avoid breathing of vapors or mists. Airborne concentrations should be kept to lowest levels possible. When exposures are not adequately controlled, use an approved respirator. Selection of air-purifying or positive-pressure supplied air will depend on the specific operation and the potential airborne concentration of material.
PAGE 8
Page 4 of 4 Revision Date: 6/1/2015 12.0 ECOLOGICAL INFORMATION 12.1 12.2 12.3 12.4 12.5 Ecotoxicity: N/A Persistence and degradability: N/A Bioaccumulative potential: N/A Mobility in soil: N/A Other adverse effects: N/A 13.0 DISPOSAL CONSIDERATIONS 13.1 Disposal methods: Dispose of in accordance with federal, state, and local regulations. 14.0 TRANSPORT INFORMATION 14.1 14.2 14.3 14.4 14.5 14.6 14.