Technical Specifications

Adhesives Description VPI Products to be Adhered
Application
(Where to Use)
Substrate Trowel
Approx
Coverage
Foot Traffic
Dry Time
VOC gm/l
MVER Max
Level
RH%
Max
pH
VPI 150
Solvent Free 2 Part
Conductive Epoxy Adhesive
ESD Static Control Tile
Superior bond strength,
on grade, above grade,
below grade and
applications where moisture
may be a concern.
Porous
Non - Porous
1/16" x 1/16"
Square Notch
with 1/16" flats
Nominally 135
Sq. Ft. per
gallon
24 Hours Zero 5 LBS. 85% 6 - 9
VPI 165
Solvent Free 1 Part
Conductive Acrylic
Adhesive
ESD Static Control Tile
On Grade or Above Grade
(Not for below grade)
Porous
Non - Porous
1/16" x 1/16"
Square Notch
with 1/16" flats
Nominally 135
Sq. Ft. per
gallon
24 Hours Zero 5 LBS. 85% 7 - 11
VPI 100
Solvent Free 2 Part Epoxy
Adhesive
(PRT) Premium Resilient Tile,
Rubber Tile, Treads, Risers, Stringers
Superior bond strength,
on grade, above grade,
below grade and
applications where moisture
may be a concern.
Porous
Non - Porous
1/16" x 1/16"
Square Notch
with 1/16" flats
Nominally 135
Sq. Ft. per
gallon
24 Hours Zero 5 LBS. 85% 6 - 9
VPI 520
Solvent Free 1 Part
Pressure Sensitive
Adhesive
(PRT) Premium Resilient Tile,
On Grade or Above Grade
(Not for below grade)
Porous
Non - Porous
1/16" x 1/16"
Square Notch
with 1/16" flats
Nominally 135
Sq. Ft. per
gallon
24 Hours Zero 5 LBS. 85% 7 - 11
ECO 560
Vinyl Acrylic 1 Part
Adhesive
Rubber Tile
(Not Treads, Risers or Stringers)
On Grade or Above Grade
(Not for below grade)
Porous
Non - Porous
1/16" x 1/16"
Square Notch
with 1/16" flats
Nominally 135
Sq. Ft. per
gallon
24 Hours Zero 5 LBS. 80% 7 - 9
VPI 600
Solvent Free 1 Part Latex
Acrylic Adhesive
Vinyl & Rubber Wall Base
Above Grade
(Not for below grade)
Porous Only
Not required if
using cartridge
tubes or 1/16" x
1/16" Square
Notch with 1/16"
flats
Nominally 275
Ln. Ft. per
gallon
N/A Zero N/A N/A N/A
VPI NC-2
Nose
Caulking
Solvent Free 2 Part
Epoxy Filler Caulk
400 ml cartridge / tube
Stair Tread Nosing All applications
Porous
Non - Porous
None
35 - 50 Lin. Ft.
@ 1/4" bead per
cartridge / tube
N/A 13 N/A N/A N/A
VPI Technical Service: [phone]
Royal Adhesive: [phone]
Instructions-Adh-Substrate Match 16: 06-06-16
Spray Lock Adhesive: [phone]
NOTE: Actual coverage will vary and depending on the substrate conditions, porosity, substrate and atmospheric temperature, humidity, application methodology and many other variables.
If more adhesive is required, please purchase from your local distributor.
Adhesive Properties - Substrate Matching Chart
Technical support and ordering information for adhesives not
branded by VPI are as follows: