Technical Specifications

Specifications

PREMIUM RESILIENT TILE

(PRT)

ACCEPTABLE MANUFACTURERS

1. VPI Corporation 3123 South 9

Street, P.O. Box 451, Sheboygan, WI 53082-0451

FLOOR COVERING SPECIFICATIONS

Solid Vinyl Resilient Floor Tile meets ASTM1700 standards

1. Square edge or pre-grooved tile 12”x 12” tiles, 24”x 24” tile, & 36”x 36”

2. Thickness 1/8” – 0.125 (3mm)

MANUFACTURING SPECIFICATIONS

1. See all ASTM specifications per VPI web site: www.vpiflooring.com

2. Meets VPI specific VOC, wear through, durability and other performance standards without

exception or deviation

ADHESIVES SPECIFICATIONS

1. VPI # 100 2 part conductive epoxy adhesive

2. VPI # 520 one part pressure sensitive conductive acrylic adhesive.

3. Spray-Lock 6500 pressure sensitive adhesive

4. Use specified trowel and roller per VPI Installation and Maintenance instructions.

PRE-INSTALLATION SPECIFICATIONS

1. See VPI PRT Installation and Maintenance instructions for substrate requirements, conditions

and specifications.

INSTALLATION SPECIFICATIONS

1. See VPI PRT Installation and Maintenance instructions for all requirements.

PAGE 1
Specifications PREMIUM RESILIENT TILE (PRT) ACCEPTABLE MANUFACTURERS th 1. VPI Corporation 3123 South 9 Street, P.O. Box 451, Sheboygan, WI 53082-0451 FLOOR COVERING SPECIFICATIONS Solid Vinyl Resilient Floor Tile meets ASTM1700 standards 1. Square edge or pre-grooved tile 12”x 12” tiles, 24”x 24” tile, & 36”x 36” 2. Thickness 1/8” – 0.125 (3mm) MANUFACTURING SPECIFICATIONS 1. See all ASTM specifications per VPI web site: www.vpiflooring.com 2.
PAGE 2
INITIAL MAINTENANCE SPECIFICATIONS 1. See VPI PRT Installation and Maintenance instructions for all requirements. 2. PRT three part maintenance system required for required aesthetics and performance POST INSTALLATION SPECIFICATIONS 1. VPI 100 2 epoxy requires 72 hours to dry before foot traffic allowed and 4-5 days before initial maintenance. 2. VPI 520 1 part pressure sensitive adhesive requires 72 hours to dry before foot traffic allowed and 4-5 days before initial maintenance. 3.