Technical Specifications

DESCRIPTION USES / BENEFITS DIRECTIONS FOR USE
VPI ESD Initial Deep Scrub
Cleaner is the first step in the
overall VPI ESD Flooring
Initial Maintenance System.
ESD Initial Deep Scrub
Cleaner meets or exceeds
green industry standards for
floor care products based on
its reduced levels of volatile
organic compounds,
biodegradability, and low
toxicity.
Used in conjunction with the
VPI ESD Initial Deep Scrub
Pad (gray in color) it deep
cleans, preps, and conditions
any new VPI ESD tile floor by
thoroughly removing deep
down manufacturing residue
and ground in installation
debris.
Deep scrub cleaning, using
VPI ESD Initial Deep Scrub
Cleaner is required before
cleaning the surface of the
floor.
• Extremely economical to use
• Highly Concentrated
• Biodegradable
• Environmentally Safe
• Preps and conditions tile
• Meets or exceeds National
Green standards for floor care
• Can be used by mopping,
or in auto scrubbers
• Leaves no residue
• Deep cleans, preps &
conditions new ESD Tile
SPECIFICATIONS
Color ....................Water White
Fragrance ......................... Mild
pH conc. ............................11.0
pH in dilution .....................10.0
Residue ............................. None
Biodegradable ....................Yes
Coverage.........4,000 sq ft per gallon
Toll Free: 800-874-4240 www.vpiflooring.com
INITIAL DEEP SCRUB CLEANING AGENT
For newly installed VPI ESD tile, sweep
or dust mop the floor to remove any large
debris. Never use oil base treated dust
mops. (See VPI ESD ONGOING
CLEANER instructions for how to clean
previously installed VPI ESD tile).
Dilute VPI ESD Initial Deep Scrub
Cleaner (1 part cleaner : 10 parts water)
or 13oz./gal with cool clean water and
apply liberally to the floor. Using the VPI
ESD Initial Deep Scrub Pad (gray in
color), agitate floor thoroughly with a low-
speed rotary machine or automatic
scrubber. Approximately 5 passes are
required to properly deep scrub the floor.
Make sure floor remains very wet. NOTE:
Place a "floater pad", such as a standard
red pad, underneath the VPI ESD Initial
Deep Scrub Pad (gray in color), before
beginning the scrubbing process. This
will enhance cleaning.
Pick up the solution with a wet vacuum,
automatic scrubber, or a mop and bucket.
Rinse with clear water only. Allow floor to
dry completely before starting the surface
cleaning process using VPI ESD Initial
Surface Cleaner in conjunction with VPI
ESD Initial Surface Cleaning Pads per
VPI's written instructions.
NOTE: It is very important to follow
the specific directions for cleaning VPI
ESD TILE. Treating it otherwise, can
negatively impact visual appearance
and electrical performance.
IMPORTANT: Never buff in excess of
375 RPM.
PRECAUTIONS
KEEP OUT OF REACH OF CHILDREN.
See container and MSDS for safety.
Item# 04101G