User Manual

X
Filler tube
Rubber
stopper
To engine
Aluminum stopper
Aluminum
cap
To muffler
TOP
BOTTOM
Using a aluminum motor mounting plate as a template,
mark the plywood motor mounting plate where the four
holes are to be drilled.
Remove the aluminum motor mounting plate and drill a 1/8”(3mm) hole through the
plywood at each of the four marks marked .
Note: The aluminum motor mounting included with electric motor set.
5x70mm..8
5mm nut..24
washer...32
5mm
3mm
Align the mark on the motor
mounting plate with the
center mark on the balk head.
X
Firewall
132~134mm
B’
B
B=B’
SIDE-VIEW
L/R
L/R
8-Electric Motor
9-Fuel tank
FDP
FDP
CA
CA
Installing the Lipo Battery Stand
Lipo Battery stand
FUSELAGE - Top view
FUSELAGE - Top view
8A
8B
8C
9A
9B
9C
(In case of electric motor using)
9D