Installation guide

12 (of 14) ROXY EC installation guide, edition 1
Changing the COM port number (reconnecting the
devices)
To change the COM port number:
1. Go to Control Panel.
2. Open the Device Manager.
3. Go to Ports (COM & LPT). Right Click on the COM to which Poten-
tiostat is connected and choose
Properties.
Fig. 8. Control panel COM port settings after connecting converter (COM
numbers automatically assigned by Windows.
4. Go to Port Settings  Advanced and choose the desired COM
number (7 for ROXY Potentiostat)
.
5. Repeat steps 3 & 4 to assign the COM nr 8 for syringe pump.