User's Manual

R.50 Phone User Manual
-11-
2.4 Charging the Battery
The rechargeable Li-ion battery that comes with your phone
is ready to be used, but is not fully charged. To charge your
battery, follow these steps:
1. Connect the charger to your phone, and plug the charger
into an electrical outlet. The battery indicator in the
corner of the screen will scroll when charging.
2. When fully charged, the battery indicator will stop
scrolling. Disconnect the charger from your phone, and
unplug the charger.
2.5 Inserting & Removing SIM Cards
Installing the SIM card
1)
Your phone supports two SIM cards. SIM slot one is labeled
WCDMA/GSM. If your SIM card supports data it must be
placed in the WCDMA/GSM slot for it to be used.
2)
Remove the battery if it is installed.
insert the SIM card with its gold
Locate the SIM card slot, and then
contacts facing down and its cut-off
corner facing out from the card slot.
3)
2.6 Inserting & Removing SD Card
Memory
Slide the SIM card completely into the slot.
1) Make sure that your phone is turned OFF, and then
Installing the SD Memory Card
To store images, videos, music, and files, you can purchase a
memory card and install it into your phone.
remove the back cover.
2) Remove the battery if it is installed.