Specifications

9
Installation in Mac OS X
On Mac OS X, you only need to install the M3 Editor and the M3 Plug-In Editor. There is no
need to install a driver in order to use FireWire Audio/MIDI.
To install the M3 Editor and M3 Plug-In Editor into Mac OS X, use the following procedure.
You must install the KORG USB-MIDI Driver if you want to connect the M3 to your
computer via USB and use the M3 Editor or M3 Plug-In Editor. (For details on installing
the KORG USB-MIDI Driver, refer to the Operation Guide.)
1 Insert the included CD-ROM into your CD-ROM drive.
2 Start up the installer by double-clicking “M3 Editor Installer.pkg” located in the “M3
Editor” folder of the CD-ROM.
3 Depending on the version of your Mac’s operating system, a confirmation dialog box
may appear at this point. If so, enter your password and click [OK].
When the installer starts up, the following screen will appear. Click [Continue].
4 “Important information” will appear. Read the contents, and click [Continue].
5 The “License agreement” will appear. Carefully read the contents, and click
[Continue].
A dialog box will ask whether you accept the terms of the license agreement. If you
accept, click [Agree].