Specifications

30
5 If you want the Individual output to be input to the audio track, turn the REC button
ON so that you can hear the M3’s audio signal.
Using the M3 as a plug-in effect
1 Start up Pro Tools 7 LE, and open a session.
2 Create an audio track, and start up “M3 Plug-In Fx” from the multi-channel plug-in
Others list. Then select the source that will be input to that track’s IN, and select the
output bus etc. that will be the output destination for that track’s OUT. Make routing
settings within the M3 so that the FireWire audio input will be input to the M3’s effect.
3 Turn the REC button ON so that you can hear the M3’s effect signal.