Specifications

34
Host application settings
The following material explains how to start up the M3 Plug-In Editor in your host applica-
tion and make the appropriate settings for it to operate properly. Please proceed to the spe-
cific explanation for the system you’re using.
Apple - Logic Pro 7
1 Start up Logic Pro 7.
2 Create an audio instrument track, and start up “M3 Plug-In Editor.”
3 To route the M3’s audio signal into Logic Pro 7, create an audio track or an audio AUX
track. As the I/O source for that track, select the audio interface input to which you’ve
connected the M3’s audio signal.
4 If you’re routing the M3’s audio signal to an audio track, turn the REC button on so
that you can hear the audio signal.
If you are routing the M3’s audio signal to an audio AUX track, this setting is not
necessary.