Specifications

38
Digidesign - Pro Tools LE 7
1 Start up Pro Tools LE 7, and open a session.
2 Create an instrument track, and from the multi-channel plug-in Instruments list,
choose “M3 Plug-In Editor” to start it up.
3 To route the M3’s audio signal to Pro Tools LE 7, create an audio track or an AUX input
track. As the input, select the audio interface input to which you’ve connected the
M3’s audio signal.
4 If you’re routing the M3’s audio signal to an audio track, turn the REC button on so
that you can hear the audio signal.
If you are routing the M3’s audio signal to an AUX input track, this setting is not
necessary.