Specifications

54
Functions specific to the editor
These are functions that are not found on the M3, and are available only from the editor (M3
Editor, M3 Plug-In Editor).
Utility commands
Load
Loads editor data that was previously saved on the computer.
The M3 XPANDED and the original M3 contain different sets of PCM data (sound data).
When you load a data file that was created on the original M3 (the old PCM), it will
automatically be converted appropriately for the new PCM.
Save
Saves data from the editor to your computer as a file.
All data is saved as data for the M3 XPANDED. Even if the data you loaded had been
created by the original M3, it will be saved as M3 XPANDED data. It is not possible to save
data as original M3 data.
Note: These functions load or save the data as dedicated files for the editor application.
Receive All
Receives all data from the M3 data into the editor.
Note: The sample data of Sample mode and the sequencer performance data of Sequencer
mode are excepted.
Transmit All
Transmits all data in the editor to the M3 and writes it into internal memory.
Receive All Combi/Current Combi Bank
Receive All Prog/Current Prog Bank
Receive SEQ
Receive Global Data/Drum Kit/Formant Motion/Current Formant
Motion
Receive the corresponding data from the M3 into the editor.
Note: Receive Formant Motion/Current Formant Motion can be used only if the EXB-
RADIAS is installed.
Transmit All Combi/Current Combi Bank
Transmit All Prog/Current Prog Bank
Transmit SEQ
Transmit Global Data/Drum Kit/Formant Motion/Current Formant
Motion
Transmit the corresponding data from the editor to the M3 and writes it.