User guide

vSync924 & 1624i User Guide © vSync DVR December 2007
Rev A. December 2007
Specifications and content are subject to change without notice.
35
3-8. Setup - Storage Mode
-Configures the hard disk record mode, or initiates a hard disk format.
Navigate through menu items using the Up/Down buttons. Change the values using the Left/Right buttons.
Figure 3.8.1. Storage Setup Screen
Table 3.8.1. Menus in Storage Setup
Item Description
OVERWRITE
When enabled, the DVR will continue recording and overwrite the
oldest existing recorded data once the hard drive is full.
When disabled, recording will stop once the hard drive is full.
FORMAT
Formats the hard disk drive.
DISK INFO
Displays HDD(s) disk information.
LOAD SETUP FROM A USB
Loads DVR setup parameters from the USB memory.
SAVE SETUP TO A USB
Stores DVR setup values to USB memory.
This feature is useful when copying the setup parameters of one
DVR to other DVRs or for building templates.
RECORD LIMIT
Turns recording limit on/off for overwrite.
RECORD LIMIT DAYS
Set number of days for the record limit. Only functions when
“Record Limit” is on.