Instruction Manual

9
CONNECTION
1. Hold the Bluetooth
®
button down for several seconds until the
Bluetooth
®
button lights up and flashes.
2. Enter the Bluetooth
®
interface of your device and begin searching
for Bluetooth
®
devices.
3. Select “VTech 5510 Microphone” when you see it displayed on
your device.
4. Enter the voiced out PIN number from the microphone on the
device.
5. When the Bluetooth
®
connection is successful, you will hear a
sound effect and “Bluetooth
®
connected”. The Bluetooth
®
button
light will remain on.
6. To exit Bluetooth
®
mode, hold the Bluetooth
®
button until you
hear “Bluetooth
®
disconnected”.
7. The microphone will automatically search and connect to the last
Bluetooth
®
device that it was connected to before. You do not
need to enter the PIN number again.
8. The effective distance between the Bluetooth
®
device and
Singing Sounds Microphone is approximately 3 metres/10 feet;
The Singing Sounds Microphone may disconnect when the
Bluetooth
®
device exceeds 3 metres/10 feet.
AUTOMATIC SHUT-OFF
To preserve battery life, the Singing Sounds Microphone will
automatically power down after several minutes without any
button or voice input. When the microphone receives voice input,
the light will change colour. The Singing Sounds Microphone can
be turned on again by pressing any button.
LOW BATTERIES
 Themicrophonewillasharedlightafewtimesandpoweroff
when the batteries are weak.