Instruction Manual

9
10. Automatic Shut-Off
To preserve battery life, the Wireless Controller will automatically
go into sleep mode after approximately 1 minute without input. The
unit can be turned on again by pressing the D-Pad, Home Button,
A Button or B Button.
11. Screen Saver Mode
LeapLand Adventures™ will automatically save and quit the current
game, then go into Screen Saver mode after approximately 20
minutes without input. To exit Screen Saver mode, press the D-Pad,
Home Button, A Button or B Button on the Wireless Controller.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
5. Always keep the Wireless Controller and HDMI Game Stick away
from water.
6. Examine the Micro USB Power Cable regularly, checking for damage
to the cable, plug and other parts. Do not use the Micro USB Power
Cable if there is any damage.
TROUBLESHOOTING
If you are unable to insert the HDMI Game Stick directly into the HDMI
port on your television due to clearance issues, a third party HDMI
extension cable may be a good solution. A short HDMI extension cable
as shown below can be purchased from major electronics retailers.
If for some reason the unit stops working or malfunctions, please follow
these steps: