User's Manual

72
Multiple handset use
Intercom
Using the telephone base:
1. Press MENU in idle mode.
2. Press CID or DIR to highlight Intercom, then press SELECT .
f If you have one handset and no other registered device, the telephone
base displays Calling HANDSET 1.
f If you have other registered device(s) or more than one handset, the
telephone base displays INTERCOM TO: and a list of registered devices.
 Press CID or DIR to highlight a destination device or all devices, then
press SELECT.
-OR-
 Usethedialingkeystoenteraspecicdevicenumber(1-9 for handset
1-9, TONE followed by 0-2 for handset 10-12, or # for a single headset/
speakerphone, # followed by 1 or 2 for headset/speakerphone 1 or 2, or
TONE followed by # for all devices).
The telephone base displays Calling HANDSET X, Calling headset or Calling
all. The destination handset(s) rings and shows Base 0 is calling or Base
0 is calling all (HANDSET represents the handset name, X represents the
handset number).
Notes:
f You can cancel the intercom call before it is answered by pressing OFF/CANCEL on the handset, or by pressing END
or CANCEL on the telephone base.
f If you are calling all handsets, only the rst handset to pick up can answer the intercom call.
f If the destination device does not answer the intercom call within 100 seconds, or if the device is in use, on a call, or
out of range, the initiating device displays No answer. Try again. and returns to idle mode.
f To temporarily silence the intercom ringer, press MUTE, OFF/CANCEL or MUTE/DELETE on the handset, or press
MUTE, CANCEL or MUTE on the telephone base.
f You can only use one pair of devices at a time to make intercom calls.