User's Guide

VTECH ENGINEERING CANADA LTD.
TITLE ENGINEERING FEASIBILITY STUDY REPORT (Modified)
MODEL WDCT – Speaker Phone/CID/ITAD Models
CAUTION: THIS IS A DRAFT COPY – HARDCOPY IS UNCONTROLLED.
Reference: PRC 00XX Revision: 1.0 Page: 4 of 9
This document is proprietary to VTECH ENGINEERING CANADA LTD.
2 PRODUCT OVERVIEW
In defining the product here, one of the key objectives is to build upon the VTech WDCT and the VTech UK DECT
product design. The aim is to minimise the number of differences between the 3 models in order to develop the
product within the desired time frame with the lowest cost possible.
2.1 FEATURE LIST
Here is a listing of the major features offered in this product line:
2.1.1 BASIC FEATURES
 2.4GHz Transmission

2.4GHz Frequency Hopping Spread Spectrum
 100% Bellcore compliance

3 and 4-way conferencing

Graphic LCD Display
 Enhance Surge resistance (800V metallic surge)
 Multi-H/S compatible –
Up to a maximum of 4 Handsets
2.1.2 HANDSET (Common across all 3 models)
 User Interface Reference: “ 60-F986 – Proposal for a common DECT4/WDCT 2.4GHz User
Interface”
 External-antenna design

Half-Duplex Speaker Phone
 2.5mm H/J
 50 Public memory locations in the Phone Directory
 Backlit LCD and Keypad
 Compatible to CID Type 2.5 functions for later models (not initial units)
 Smart Dialing from CID information
 Multi-line LCD for simultaneous display CID information and Soft key labels.
 Provide Pay Per Use function possibilities for the RBOCs
 Intercom with B/S
 VMWI LED on the top of H/S
 VMWI with both Stutter and FSK detection.
 Face-up charging only.
 Hands-Free Speaker

Remote ITAD Control (Applicable with an ITAD Base Only)
 Belt clip
 Wall mount provision
2.1.3 Base Station(2421)
 Spare battery charger with POTS mode
 Battery: 2xAA NiMH

VMWI LED
2.1.4 Base Station(2431)
 Spare battery charger with POTS mode
 Battery: 2xAA NiMH
 Dual Keypad

Full Duplex Speaker Phone for Hands free operation
 3 function keys: They will be 3 PPU keys for the RBOC Models and they will be M1/M2/M3
Quick Dial keys in the case of VTech Models.

VMWI LED