USB 7100 Dual Line Cordless USB Telephone
USB 7100 Dual Line Cordless USB Telephone Important Before using this telephone, you must: Install and charge batteries ......................................................................See page 7 Install software ........................................................................................See page 9\ System requirements: • • • • • Table of contents PC with Windows® 2000 or XP 400 MHz processor 128 MB RAM 15 MB free disk space on your hard drive Internet connection (at least 33.
Getting Started Getting Started Quick reference guide Parts checklist Handset Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service. Check to make sure the telephone package includes the following: V ^ Press to scroll up in menus. While entering names, press to advance cursor. Press to scroll down in menus. While entering names, press to move the cursor to the left.
Getting Started Getting Started Before you begin Telephone base installation Internet calling About Caller Identification To make and receive Internet calls, you must install software provided on the enclosed CD-ROM (see page 00). You may also be required to establish a Skype™ account to make Internet calls to standard telephones. There may be fees for this service. For more information, please visit www.skype.com.
Getting Started Getting Started Wall mounting Battery installation & charging The telephone base can be installed on any standard wall-phone outlet as shown below. Choose a location away from electronic equipment, such as television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. After installation, place the handset in the base and allow to charge for 12 hours before use. You can keep batteries charged by placing the handset in the base after each use.
Getting Started Getting Started Belt clip & optional headset Install belt clip as shown below if desired. For hands-free telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). Software installation To make and receive Internet calls, you must install Vtech™ and Skype™ software provided on the CD-ROM included with your telephone.
Telephone Operation Type of call IN USE 0:01:23 INTERCM Telephone Operation Elapsed time MUTE Basic operation Options while on calls Making and answering calls Volume control To answer incoming calls, press the CALL button that is flashing. If Auto Answer is activated, the call will be answered when you lift the handset from the base (see page 14).
Telephone Operation Telephone Operation Highlighted menu item Intercom and call transfers READY INTERCM Handset settings MENU Intercom calls The intercom allows you to communicate with optional expansion handsets without using an outside line. 2 > LIVING ROOM 3 BEDROOM OK Press the INTERCM button to see a list of active handsets. Press the ^V buttons to select the set you want, then press OK to page the other handset. 1> SOUNDS 2 HANDSET NAME OK Press MENU to begin To answer a page, press INTERCM.
Telephone Operation Telephone Operation Handset settings 3 > AUTO ANSWER 4 LANGUAGE OK 1 > ENGLISH 2 SPANISH OK 1 > REGISTER 2 DEREGISTER OK 3 Auto answer When on, incoming calls will be answered automatically when you lift the handset from the base. Press OK to toggle Auto Answer on or off (a checkmark appears when on). Press OFF to save & exit.
Phonebook Phonebook PAT WILLIAMS 555-1234 EDIT DELETE READY INTERCM MENU Shared phonebook directory To create a new phonebook entry The phonebook directory is stored in the base, and is shared by all handsets. Changes made at any handset will be reflected in all handsets. Press the PHONEBOOK button, then press NEW to add a new entry. Use the dial pad to enter up to 32 digits, then press OK. You will be notified if the number is already in your phonebook.
Phonebook READY INTERCM MENU Phonebook button Phonebook Phonebook search Press the PHONEBOOK button, then press PREVIEW to display the first entry in the phonebook. You can then use the up/down arrows to browse through the phonebook, or search to find a specific entry. Press OFF at any time to exit the directory. READY INTERCM MENU To dial a number When any phonebook entry is displayed, press CALL/FLASH to dial the displayed number (or press LIST/CALL to make an Internet call to this number).
Caller ID Logs Caller ID Logs READY INTERCM NEW MENU How Caller ID works To review your call log 08:15AM 02/14 If you subscribe to Caller ID service provided by your local phone company, information about each caller will be displayed after the first ring.
Appendix Appendix Screen icons and indicator lights Adding new handsets Handset screen icons 1> SOUNDS 2 HANDSET NAME Telephone line OK Internet line MUTE NEW * to unlock) MUTE Press MENU to begin Press Menu item selected Microphone is muted (press MUTE to resume conversation) V to display Registration 5 > REGISTRATION 6 TIME & DATE OK NEW Before using a new handset, you must first install and charge the batteries (see page 7).
Appendix Appendix In case of difficulty In case of difficulty If you have difficulty with your phone, please try the suggestions below. For customer service, please visit our Web site at www.vtechphones.com, or call 1-800-595-9511 (USA) or 1-800-267-7377 (Canada). Problems with telephone line Problems with Internet line Phone does not ring If you hear noise or interference during a call • You may be out of range. Move closer to the base.
Appendix Appendix Technical specifications Index RF Frequency Band (Handset to Base) 2400 MHz — 2483 MHz RF Frequency Band (Base to Handset) 2400 MHz — 2483 MHz Channels 95 Channel Spacing 864 KHz Output Power 20 dBm Sensitivity -96 dBm GFSK N ON O I T RMA ATIONS NFO IFI32°F C — 122°F OperatingG Temperature I C N I E 0°C — 50°C D P PEN ICAL S Base 96 — 130 Vrms HNUnit Voltage TEC(AC Voltage, 60Hz) Modulation Base Unit Voltage (AC Adapter Output) 7 — 13 Vdc @400 mA Handset Voltage 3.
www. vtechphones .com Distributed in the U.S.A. by VTech Communications, Inc. Beaverton, Oregon, 97008 1-800-595-9511 Distributed in Canada by VTech Telecommunications Canada Ltd. 200-7671 Alderbridge Way, Richmond, B.C. V6X 1Z9 1-800-267-7377 © 2005 VTech Telecommunications Ltd. All rights reserved. VTech brand and logo are trademarks of VTech Telecommunications Ltd. Printed in China. Issue 1.1 VTech 03/01/05.
