User’s manual TL7610/TL7611 DECT 6.
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information on pages 46-49 of this manual. Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Parts checklist - TL7610 Check to make sure the headset package includes the following items: User’s manual Quick start guide TL7610/TL7611 TL7610/TL7611 DECT 6.0 cordless DECT 6.0 cordless headset headset User's manual Quick start guide Cordless headset Headset base Battery compartment cover Battery for headset Headset base power adapter Behind-the-neckband Over-the-headband Over-the-ear hook Battery Pack BT191545 3.
Parts checklist - TL7611 Check to make sure the headset package includes the following items: User’s manual Quick start guide TL7610/TL7611 TL7610/TL7611 DECT 6.0 cordless DECT 6.0 cordless headset headset TL7610/7611 User's manual TL7000 User's manual TL7610/7611 Quick start guide Cordless headset Over-the-ear hook Battery Pack BT191545 3.
User’s manual TL7610/TL7611 DECT 6.0 cordless headset Table of contents Getting started Quick reference guide headset....................................... 1 headset base............................ 2 Installation preparation............. 4 Headset base installation......... 5 Battery installation................... 10 Battery charging........................ 11 Headset attachments....................12 Operation Headset base settings............ 20 Headset operation....................
Getting started Quick reference guide - headset ON/OFF Press to make, answer and end a call. The light is on when the headset is charging in the headset base. The light flashes when you are on a call or when there is an incoming call (page 28). VOLUME Press the volume key on the side of the headset to adjust the listening volume when on a call. MUTE/FLASH Press to mute the microphone during a call (page 26). Press and hold to receive call waiting during a call (page 25).
Getting started Quick reference guide - headset base Charging cradle Insert the headset here for charging. PAIR Press to register or de-register the headset. NO LIFTER MODE light On when NO LIFTER MODE is selected. Flashes while on a call or another telephone is in use on the same line. Flashes quickly when there is an incoming call. LIFTER MODE light On when the LIFTER MODE is selected. Flashes while on a call. Flashes quickly when there is an incoming call. MUTE light On when the call is muted.
Getting started Quick reference guide - headset base LIFTER AUDIO ADJUST Adjust the switch to choose the best headset audio quality when using a handset lifter. (See the handset lifter user's manual for more information. You may download the manual at www.telephones.att.com.) VOLUME Press the volume keys on the side of the headset base to adjust the speaking volume when on a call. MODE Press to choose between the NO LIFTER or LIFTER MODE when the headset is not in use.
Getting started Installation preparation You must install and charge the battery before using the headset. STOP! See pages 10-11 for easy instructions. If you subscribe to high-speed Internet service (Digital Subscriber Line - DSL) through your telephone lines, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter will prevent noise and caller ID problems caused by DSL interference.
Getting started Headset base installation IMPORTANT: If you purchased model TL7611, see the TL7000 handset lifter manual for installation instructions. Optional accessories It is recommended that you install a handset lifter (model TL7000) and/or a dial pad (model TL7601) with your headset. The following optional accessories are compatible with your headset and base: • The TL7000 is a handset lifter with ring detector.
Getting started Headset base installation If you are installing the headset base with neither the lifter nor the dial pad, there are two installation options: Option 1: You may use the headset as a stand-alone product without a phone. • You will only be able to receive calls. If you want to make calls, an accessory dial pad (model TL7601, sold separately) is required. • The headset base and headset do not have an external ringer. When you receive calls, the headset earpiece will play ring tone.
Getting started Headset base installation Before installing the headset base: Remove the rear bottom piece of the headset base by pushing it away from the base (as shown in Figure 1). Figure 1 Install the headset base as shown on the following pages. After completing installation option 1 or 2: Slide the rear bottom piece towards the base until it clicks into place (as shown in Figure 2).
Getting started Headset base installation Option 1: Headset base stand-alone installation (TL7610) With this installation, you can receive calls only. 1. Plug the small end of 2. Plug one end of the the headset base power adapter into the POWER jack (green dot) at the back of the headset base. telephone line cord into the TEL WALL JACK (red dot) at the back of the headset base. Telephone line cord 3. Plug the other end of the telephone line cord into a telephone jack. 4.
Getting started Headset base installation Option 2: Headset base with corded or cordless phone (any brand) installation (TL7610) With this installation, you can make and receive calls using the corded or cordless phone. 2. Plug one end of the 1. Plug the small end telephone line cord into the TEL WALL JACK (red dot) at the back of the headset base. of the headset base power adapter into the POWER jack (green dot) at the back of the headset base. 3.
Getting started Battery installation Install the battery as shown below. After installing the battery, you may be able to make and receive short calls. For optimal performance, charge the headset battery for at least six hours before use. When not in use, recharge the headset by returning it to the headset base. 1. Press in on both sides of the battery compartment cover and lift the cover up and off. Ba BT tte 3.