User’s manual w w w.v t e c h c a n a d a .
Congratulations on purchasing your new VTech product. Before using this telephone, please read the Important safety instructions on page 64 of this manual. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech telephone. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich VTech product. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com.
Table of contents Call waiting ...................................... 19 Equalizer.......................................... 19 Chain dialing.................................... 20 Redial ............................................. 20 View a redial entry ........................... 20 Dial a redial entry............................. 21 Delete a redial entry ........................ 21 Copy a number form the redial list to the directory ................................. 21 Multiple handset use.............
Reassign a speed dial number ........ 35 Delete a speed dial entry................. 35 Record, play and delete memos...... 49 Message window displays ............... 49 Remote access................................ 50 Caller ID operation......................... 36 Appendix ........................................ 51 About caller ID ................................. 36 Information about caller ID with call waiting .......................................... 36 Caller ID log...............................
Getting started Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in case it is necessary to ship your telephone for warranty service.
Getting started Base layout IN USE light Flashes when there is an incoming call, or another telephone sharing the same line is in use. On when the telephone is in use, or the answering system is answering a call. X/DELETE Press to delete the message currently playing (page 46). When the phone is not in use, press twice to delete all old messages (page 48). /SKIP Press to skip to the next message (page46). /ANS ON/OFF Press to turn the answering system on or off (page 41).
Getting started Handset layout CHARGE light On when the handset is charging in the telephone base or charger (page 8). /VOLUME (directory/volume) Press to enter the directory when the telephone is not in use (page 32). While in a menu, press to scroll up. During a call, press to increase the listening volume (page 17). MUTE/DELETE While on a call, press to mute the microphone (page 18).
Getting started Handset layout CID/VOLUME (caller ID/volume) Press to review the caller ID log when the telephone is not in use (page 38). While in a menu, press to scroll down. During a call, press to decrease the listening volume (page 17). MENU/SELECT Press to show the menu. While in a menu, press to choose an item, or save an entry or setting. OFF/CLEAR During a call, press to hang up (page 17). While the handset is ringing, press to silence the ringer temporarily (page 18).
Getting started Handset layout Push to talk (PTT) Press to begin a one-to-one or one-to-all broadcast message (pages 25 and 27).
Getting started Telephone installation Install the telephone base and charger(s) as shown below. Make sure that the electrical outlet is not controlled by a wall switch. If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference.
Getting started Battery installation Install the battery as shown below. 1. If the battery compartment cover is on the handset, press on the grooved tab and slide the cover to remove. 2. Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label. 3. Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment. 4.
Getting started Handset battery charging Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 10 hours of continuous charging. See the table on page 54 for battery operating times.
Getting started Installation options Your telephone base is ready for tabletop use. If you want to mount your telephone on a wall, use the provided wall mount bracket to connect with a standard dual-stud telephone wall mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronics retailers. You may need a professional to install the mounting plate. Tabletop to wall mount installation 1.
Getting started Wall mount to tabletop installation 1. If the telephone line cord and power adapter cord are bundled, untie them first. 2. Slide the black wall mount bracket up and remove it from the wall plate. Unplug the telephone line cord (or DSL filter) from the wall. Unplug the power adapter from the power outlet. 3. Slide the telephone base up and remove it from the wall mount bracket. 4. See Telephone installation on page 6.
Telephone settings Ringer volume (telephone base) • Press /VOL or /VOL on the right side of the telephone base to adjust the ringer volume when the telephone is not in use. When you set the base ringer volume to off, the window box displays 0 and the system announces, “Base ringer is off.” Ringer volume (handset) You can set the ringer volume or turn the ringer off. When the icon appear on the screen. ringer is off, Ringer off and Caller ID log >Ringers 1.
Telephone settings Set date/time The answering system announces the date and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. However, the year must be correct so that the day of the week can be calculated from the caller ID information.
Telephone settings Voice announce caller ID The voice announce caller ID feature lets you know who is calling without having to look at the display. When you have an incoming call, the handset and/or base speaks the name and number of the caller based on the directory or caller ID information. If the caller’s name is private or unknown, the last 11 digits of the telephone number will be spoken, if no digits are available, “no digits” will be spoken.
Telephone settings 1. Press MENU/SELECT when the handset is not in use. 2. Press CID or MENU/SELECT. to highlight >Settings, then press to highlight >Clr voicemail, then press 3. Press CID or MENU/SELECT. The screen displays Turn off indicator? 4. Press MENU/SELECT to save your selection and return to the previous menu. You hear a confirmation tone. • • Annc Caller ID >Clr voicemail Turn off indicator? Your telephone service provider may alert you of new messages with a stutter (broken) dial tone.
Telephone settings Key tone You can choose different key tone for each handset. 1. Press MENU/SELECT when the handset is not in use. 2. Press CID or MENU/SELECT. to highlight >Settings, then press 3. Press CID or MENU/SELECT. to highlight >Key tone, then press Rename handset >Key tone KEY TONE 4. Press CID or to adjust the volume. A sample of each ringer volume plays as you scroll through the choices. Off displays on the screen when the key tone is turned off. 5.
Telephone settings 3. Press CID or to highlight >Home area code, then press MENU/SELECT. The screen displays only for 7digit dial from CID for two CID time sync seconds, then automatically advances to home area code >Home area code edit mode. 4. Press the dialing keys to enter a three-digit home area code. • Press MUTE/DELETE to delete a digit. • Press and hold MUTE/DELETE to delete all digits. • Press CID or to move the cursor to the right or left. Press MENU/SELECT to save your selection.
Telephone operation Make a call 1. Press /FLASH or a dial tone. /SPEAKER on the handset. You hear 2. Dial the number. Predial a call 1. Dial the number on the handset. 2. Press /FLASH or /SPEAKER. Answer a call Press (0-9, #, /FLASH, /SPEAKER or any of the dialing keys ) on the handset to answer a call. • • The handset screen shows the elapsed time as you talk (in hours, minutes and seconds).
Telephone operation Mute The mute function allows you to hear the other party but the other party cannot hear you. • During a call, press MUTE/DELETE. The handset screen displays Muted for a few seconds and MUTE displays until the mute function is turned off. • Press MUTE/DELETE again to resume the conversation. The handset screen temporarily displays Microphone ON.
Telephone operation Find handset The find handset feature is useful if you misplace any handsets. To start the paging tone: • Press /FIND HANDSET on the telephone base. All idle handsets ring, the handset screens display ** Paging **. To end the paging tone: • To end paging, press /FLASH, /SPEAKER, any dialing keys (0-9, #, ) on the handset or press /FIND HANDSET on the telephone base.
Telephone operation Chain dialing Use this feature to initiate a dialing sequence from numbers stored in the directory, caller ID log or redial list while you are on a call. Chain dialing can be useful if you wish to access other numbers (such as bank account numbers or access codes) from the directory, caller ID log or redial list. To access a number from the directory while on a call: 1. Press MENU/SELECT. 2. Press CID or MENU/SELECT. to highlight >Directory, then press 3.
Telephone operation Dial a redial entry • Display the desired redial number, then press /FLASH or /SPEAKER. -ORPress /FLASH or /SPEAKER, then press REDIAL/PAUSE. Press REDIAL/PAUSE repeatedly or CID or to browse to the desired entry, then press MENU/SELECT. Delete a redial entry 1. Press REDIAL/PAUSE to enter the redial list. 2. Press CID or or REDIAL/PAUSE repeatedly to browse to the desired entry. 3. Press MUTE/DELETE to delete the displayed entry. You hear a confirmation tone.
Telephone operation To share an outside call: • When a handset is already on a call, you can join the call by pressing /FLASH or /SPEAKER on another handset. • To exit the call, press OFF/CLEAR or place the handset in the telephone base or charger. The call will not end until all handsets hang up. Intercom Use the intercom feature for conversations between two handsets. This feature is not available for model LS6429. Intercom does not show on the main menu if only one handset is available or registered. 1.
Telephone operation Answer an incoming call during an intercom call If you receive an incoming outside call during an intercom call, there will be an alert tone. • To answer the call, press automatically. /FLASH on the handset. The intercom call ends • To end the intercom call without answering the incoming call, press OFF/CLEAR on the handset. The telephone continues to ring. Announced transfer Use this feature to transfer an outside call to other system handsets by notifying them first.
Telephone operation Blind transfer Use this feature to transfer an outside call to other system handsets without notifying them. This feature is not available for model LS6429. 1. When the handset is on a call, press MENU/SELECT. 2. Press CID or to scroll to >Transfer, then press MENU/SELECT. • If you have a two-handset system, your handset screen displays Transferring call... • If you have more than two handsets, your handset screen displays TRANSFER TO:.
Telephone operation Push to talk (PTT) You can directly broadcast messages from one handset to the speakerphone of one or all other handsets. Any handset you call can respond by pressing Push to talk on the right side of the handset to begin a two-way communication. If there is only one handset is available or registered, the handset screen shows PTT requires two handsets when you press Push to talk. • Only one handset can talk at a time. To do so, press and hold Push to talk.
Telephone operation PTT to a single handset 1. You have two ways to begin a PTT call: • If you have a two-handset system, press and hold Push to talk when the handset is not in use. • If you have more than two handsets, press Push to talk when the handset is not in use. Then use the dialing keys to enter a handset number (to call 0, 1 and 2 respectively) or press handset 10, 11 or 12, press CID or to highlight a handset number and then press MENU/SELECT or Push to talk.
Telephone operation PTT to all handsets When there are two to five handsets registered to the phone system, PTT supports one-to-all calls (one-to-four maximum). However if there are six or more handsets registered to the phone system, PTT supports a maximum of one-tothree calls. The first four registered handsets will be able to use this feature. Other handsets can only use PTT for one-to-one calls. 1. To begin a PTT-to-all call: • Press and hold Push to talk when the handset is not in use.
Telephone operation Answer PTT You can respond to a PTT call whenever the speakerphone light is off, as described below. 1. When your handset receives a PTT call, the handset beeps and the screen displays Press and hold [PTT] to talk. 2. When someone else is speaking, your speakerphone light is on, and your handset screen displays PTT From HS X To HS Y to (X represents the originating handset number, Y represents your handset number; a maximum of four handset numbers appear). 3.
Telephone operation End PTT • For one-to-one PTT, both originating and destination handsets can end PTT. • For one-to-all PTT, the originating handset can end the PTT call for all handsets on the PTT call. If any one of the destination handsets leaves the PTT call, the call continues until all handsets hang up. To end or leave PTT: • Press OFF/CLEAR or place the handset in the telephone base or charger. The handset screen displays Push to talk Ended.
Telephone operation Directory The directory can store up to 50 entries with up to 30 digits for each phone number and 15 alphanumeric characters for each name. • Directory entries are shared by all system handsets. Any additions, deletions or edits made on one handset are reflected on all handsets. • When there are no records in the directory, the screen displays Directory empty. • When the directory is full and you try to save an entry, the screen displays Directory full.
Telephone operation 3. Press MENU/SELECT to move to the name. The screen displays ENTER NAME. 4. Use the dialing keys (see page 31) to enter the name. • Press 0 to add a space. • Press MUTE/DELETE to backspace and delete a character. • Press and hold MUTE/DELETE to delete all characters. • Press CID or to move the cursor to the right or left. 5. Press MENU/SELECT to confirm. The screen displays Saved and you hear a confirmation tone.
Telephone operation Search the directory Entries are sorted alphabetically. To search the directory: 1. Press when the handset is not in use. Answering sys >Directory -ORa. Press MENU/SELECT when the handset is not in use. to highlight >Directory, then press b. Press CID or MENU/SELECT. c. Press MENU/SELECT again to select >Review. 2. Press CID or to browse. >Review Add contact Mike Smith 800-595-9511 Alphabetical search To start an alphabetical search: 1. Press when the handset is not in use. -ORa.
Telephone operation Edit a directory entry Use the following steps to edit an entry in the directory. 1. When in the directory (see Search the directory or Alphabetical search on page 32), press CID or to browse to the desired entry. 3. Press MENU/SELECT. The screen displays EDIT NUMBER. 4. Use the dialing keys to edit the number (up to 30 digits). • Press MUTE/DELETE to backspace and delete a digit. • Press and hold MUTE/DELETE to delete the whole digits.
Telephone operation Assign a directory entry to a speed dial location You can store up to 10 directory entries in the speed dial directory. The speed dial entries are shared by all registered handset. >Add contact Speed dial 1. Press and hold an empty speed dial key (0-9). -OR- a. Press MENU/SELECT when the handset is not in use. to scroll to Directory and then press b. Press CID or MENU/SELECT. to scroll to Speed dial, then press c. Press CID or MENU/SELECT. to select an empty speed dial location. d.
Telephone operation Reassign a speed dial number 1. Press MENU/SELECT when the handset is not in use. 2. Press CID or MENU/SELECT. to scroll to Directory and then press 3. Press CID or MENU/SELECT. to scroll to Speed dial, then press 4. Press CID or to select a desired speed dial location, then press MENU/SELECT. 5. Press MENU/SELECT. Press CID or to scroll to >Change SD, then press MENU/SELECT. The screen displays Copy from Directory... 6. Press CID or to select a desired directory entry.
Caller ID operation About caller ID This product supports caller ID services provided by most telephone service providers. Depending on your service subscription, you may see the caller’s number, or the caller’s name and number that are sent by your telephone service provider after the first or second ring. Caller ID allows you to see the name, number, date and time of calls.
Caller ID operation Caller ID log If you subscribe to caller ID service, information about each caller will appear after the first or second ring. If you answer a call before the caller information appears on the screen, it will not be saved in the caller ID log. • The caller ID log stores up to 50 entries. Each entry has up to 24 digits for the phone number and 15 characters for the name. If the phone number has more than 15 digits, only the last 15 digits appear.
Caller ID operation Missed call indicator When there are calls that have not been reviewed in the caller ID log, the handset screen displays XX Missed call(s). When you have reviewed all the missed calls, the missed call indicator no longer displays. Each time you review a caller ID log entry marked NEW, the number of missed calls decreases by one.
Caller ID operation Dial a caller ID log entry 1. When in the caller ID log (see Review the caller ID log on page 38), press CID or to browse to the desired entry. 2. Press /FLASH or /SPEAKER to dial. Save a caller ID log entry to the directory 1. When in the caller ID log, press the desired entry. CID or to browse to Tom Miller 888-490-2005 2. Press MENU/SELECT to highlight an entry. The screen displays EDIT NUMBER. 3. Use the dialing keys to edit the number (up to 30 digits).
Caller ID operation Delete the caller ID log entries To delete one entry: 1. When in the caller ID log (see Review the caller ID log on page 38), press CID or to browse to the desired entry. 2. Press MUTE/DELETE to delete the selected entry. To delete all entries: Directory >Caller ID log 1. Press MENU/SELECT when the handset is not in use. 2. Press CID or MENU/SELECT. to highlight >Caller ID log, then press Review >Del all calls to highlight >Del all calls, then press 3. Press CID or MENU/SELECT.
Answering system settings Answering system You must use a system handset to change your answering system settings. Changes of answering system setup made on one handset apply to all system handsets. Answer ON/OFF The answering system must be turned on to answer and record messages. When the answering system is turned on, the /ANS ON/OFF light on the telephone base will be on and ANS ON will display on the handset.
Answering system settings Number of rings You can choose from two, three, four, five, six rings or toll saver. With toll saver selected, the answering system answers after two rings when you have new messages, and after four rings when you have no new messages. This enables you to check for new messages and avoid paying unnecessary long distance charges if you are calling from out of your local area. 1. Press MENU/SELECT when the handset is not in use. 2. Press CID or MENU/SELECT.
Answering system settings Message alert tone The telephone base beeps every 10 seconds to alert you of new messages. The tone stops when all new messages have been reviewed. 1. Press MENU/SELECT when the handset is not in use. 2. Press CID or MENU/SELECT. to highlight >Answering sys, then press 3. Press CID or MENU/SELECT. to highlight >Ans sys setup, then press 4. Press CID or MENU/SELECT. to highlight >Msg alert tone, then press Remote code >Msg alert tone MSG ALERT TONE >On 5.
Answering system settings Record your own announcement You can record an announcement up to 90 seconds, but announcements shorter than two seconds will not be recorded. 1. Press MENU/SELECT when the handset is not in use. 2. Press CID or MENU/SELECT. to highlight >Answering sys, then press Play annc >Record annc 3. Press MENU/SELECT to select >Announcement. to highlight >Record annc, then press 4. Press CID or MENU/SELECT.
Answering system operation Answering system and voicemail Your telephone has separate indicators for two different types of voice messages: those left on its built-in answering system and those left at your service provider’s voicemail. Your telephone’s built-in answering system messages and voicemail messages are separate. Each alerts you to new messages differently. • If and New voicemail display on the handset, your telephone service provider is indicating that it has new voicemail for you.
Answering system operation New message indication The message window on the telephone base flashes and XX New message(s) displays on the handset when there are new answering system messages. If the new message alert tone is turned on, the telephone base beeps every 10 seconds when there are messages that have not been reviewed.
Answering system operation To play messages with the telephone base: • Press /PLAY/STOP when the telephone is not in use. Options during playback: • Press /VOL or /VOL to adjust the speaker volume. • Press /SKIP to skip to the next message. • Press /REPEAT to repeat the message currently playing. Press twice to listen to the previous message. /REPEAT • Press X/DELETE to delete the current message. The system advances to the next message. • Press /PLAY/STOP to stop, the telephone plays a long beep.
Answering system operation • Press 3 or MUTE/DELETE to delete the current message. The system announces, “Message deleted” and advances to the next message. • Press 5 to stop. • • • When the answering system has less than three minutes of recording time left, “Less than three minutes to record” is announced. When the telephone is not in use, if F and the number of messages are flashing alternately in the message window, or the handset screen displays Rec mem full, the memory is full.
Answering system operation Record, play and delete memos Memos are your own recorded messages used as reminders for yourself or others using the same answering system. You can record your own memos using a system handset. Play and delete them in the same way as incoming messages (see Message playback on page 46). To record a memo: 1. Press MENU/SELECT when the handset is not in use. 2. Press CID or to highlight >Answering Sys, then press MENU/SELECT. 3.
Answering system operation Remote access A two-digit security code is required to access the answering system remotely from any touch-tone telephone. The preset code is 19; see Remote access code on page 42 to change it. 1. Dial your telephone number from any touch-tone telephone. 2. When the system plays your announcement, enter the two-digit security code. 3. Then you can enter one of the following remote commands. Command Function 1 Play all messages. 2 Play new messages.
Appendix Handset display screen messages Number already saved The telephone number entered is already stored in the directory. Caller ID log empty There are no caller ID log entries. Calling handset X Calling another handset. Calling other handset Directory empty There are no directory entries. Directory full The directory is full. Ended You have just ended a call. Handset X is calling Another system handset is calling. Other handset is calling Incoming call There is an incoming call.
Appendix Out of range OR No pwr at base The handset cannot communicate with the telephone base. Check the telephone base power connection or move closer. **Paging ** The system handset is being paged. Phone The handset is on a call. Place in charger The battery is very low. Place the handset in the telephone base or charger for recharging. Rec mem full The battery is very low. Place the handset in the telephone base or charger for recharging.
Appendix Handset and telephone base indicators Handset lights On when the handset speakerphone is in use. CHARGE On when the handset is charging in the telephone base or charger. Telephone base lights IN USE On when the telephone line is in use. On when the answering system is answering a call. On when you are registering a handset. Flashes quickly when there is an incoming call. Flashes when another telephone sharing the same line is in use. Flashes when you are deregistering all handsets.
Appendix Handset battery It takes up to 10 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance: Operation Operating time While in handset use (talking*) Up to seven hours While in speakerphone mode (talking*) Up to five hours While not in use (standby**) Up to seven days *Operating times vary depending on your actual use and the age of the battery. **Handset is not charging or in use.
Appendix Expand your telephone system The handsets provided with your telephone system are already registered. Each handset is assigned a number that displays on the handset. Additional handsets registered to the telephone system are assigned in sequential order. For instance, if the telephone system already has HANDSET 1 and HANDSET 2, the new registered handset is assigned HANDSET 3. This telephone system accommodates up to five handsets.
Appendix Deregister a handset If you want to replace a handset, or reassign the designated handset number of a registered handset, you must deregister all the handsets that are registered to the telephone base. Then register each handset individually. To make deregistration easier, read all of the instructions on this page before you begin. To deregister all handsets: 1.
Appendix Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For customer service, visit our website at www.vtechphones.com, or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. My telephone does not work at all. • • • • • • • • • Make sure the battery is installed and charged correctly (pages 7-8). For optimum daily performance, return the handset to the telephone base or charger after use.
Appendix Troubleshooting Low battery shows on screen. • • • • • • • • • Place the handset in the telephone base or charger for recharging. Completely remove and install the battery again and use it until fully depleted, then recharge the handset in the telephone base or charger for up to 10 hours. If the above measures do not correct the problem, replace the battery. The battery does not charge in the handset or the handset battery does not accept charge.
Appendix Troubleshooting My handset beeps and is not performing normally. • • • • Make sure the power cord is securely plugged into the telephone base. Plug the telephone base into a different working electrical outlet not controlled by a wall switch. Move the handset closer to the telephone base. It may be out of range. Reset the telephone base by unplugging the electrical power to the base. Wait for 15 seconds and plug it back in again.
Appendix Troubleshooting I hear other calls when using the cordless handset. • Disconnect the telephone base from the telephone wall jack. Plug in a different telephone. If you still hear other calls, the problem is probably in the wiring or telephone service. Call your telephone service provider. The other party cannot hear my voice during a call. • Make sure the mute feature is not turned on during a call (page 18). Registration failed appears on the handset.
Appendix Troubleshooting Caller ID entries do not match the numbers I need to dial. • • Caller ID service delivers 10 digits (the area code plus the seven-digit number). If you need to dial something other 10 digits, see View dialing options on page 38 for instructions on changing the number. If you dial seven digits for local calls, you may want to use the home area code feature (page 15). Out of range OR No pwr at base shows in the handset screen. • • • • The handset may be out of range.
Appendix Troubleshooting • If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems. The outgoing announcement is not clear. • • When recording the announcement, make sure you speak in a normal tone of voice towards the microphone of the handset. Make sure there is no background noise when recording.
Appendix Troubleshooting I subscribe to a nontraditional telephone service that uses my computer to establish connections, and my telephone doesn’t work. • • • • • • Make sure your computer is powered on. Make sure your Internet connection is working properly. Make sure that the software is installed and running for your nontraditional telephone service. Make sure to plug your USB telephone adapter into a dedicated USB port on your computer.
Appendix Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water. 5.
Appendix Important safety instructions 15. Only put the handset of your telephone next to your ear when it is in normal talk mode. 16. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.
Appendix Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that: Pacemaker patients • Should keep wireless telephones at least six inches from the pacemaker.
Appendix About cordless telephones • Privacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the cordless handset by radio waves, so there is a possibility that the cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones.
Appendix FCC, ACTA and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation.
Appendix FCC, ACTA and IC regulations If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty. If this equipment is causing harm to the telephone network, the telephone company may temporarily discontinue your telephone service.
Appendix Limited warranty What does this limited warranty cover? The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions.
Appendix Limited warranty How do you get warranty service? To obtain warranty service, please visit our website at www.vtechcanada.com or call 1 (800) 2677377. NOTE: Before calling for service, please review the user’s manual - a check of the Product’s controls and features may save you a service call.
Appendix Technical specifications Frequency Control Crystal controlled PLL synthesizer Transmit frequency Handset: 1921.536-1928.448 MHz Telephone base: 1921.536-1928.448 MHz Channels 5 Nominal effective range Maximum power allowed by FCC and IC. Actual operating range might vary according to environmental conditions at the time of use. Operating temperature 32°F — 122°F (0°C — 50°C) Power requirements Handset: 2.
Appendix Index A Delete announcement, 44 Delete a speed dial entry, 35 Delete the caller ID log entries, 40 Deregister a handset, 56 Dial a caller ID log entry, 39 Dial a directory entry, 32 Dial a speed dial entry, 34 Dialing options, 38 Dial mode, 16 Directory, 30 About cordless telephones, 67 Add a handset, 55 Alphabetical search, 32 Announced transfer, 23 Announcement, 43 Answer a call, 17 Answer an incoming call during an intercom call, 23 Answer an incoming call during PTT, 29 Answering system, 41,
Appendix L R LCD language, 12 Limited warranty, 70–71 Reassign a speed dial number, 35 Record announcement, 44 Redial, 20–21 Register a handset, 55 Remote access, 50 Remote access code, 42 Rename handset, 14 Review the caller ID log, 38 Ringer tone, 11 Ringer volume (handset), 11 Ringer volume (telephone base), 11 M Maintenance, 66 Make a call, 17 Make an outgoing call during PTT, 29 Memo, 49 Memory match, 37 Message alert tone, 43 Message capacity, 45 Message playback, 46 Message recording time, 43 Mes
VTECH TELECOMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications, Inc., Beaverton, Oregon 97008 Distributed in Canada by VTech Technologies Canada Ltd., Richmond, B.C. V6W 1L5 Copyright © 2010 for VTECH TELECOMMUNICATIONS LTD. Printed in China.
