User’s manual w w w.v t e c h p h o n e s .
Congratulations on purchasing your new VTech product. Before using this telephone, please read Important safety instructions on pages 61-62 of this manual. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech telephone. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich VTech product. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com.
Table of contents Getting started.................................1 Chain dialing....................................17 Join a call in progress......................18 Find handset....................................18 Redial list.........................................19 Review and dial a redial entry.........19 Store a number from the redial list to the directory.............................19 Delete a redial entry........................19 Intercom..........................................
Table of contents Review and dial from the call log.....31 View dialing options.........................32 Save a call Iog entry to the directory.................................32 Delete from the call log....................33 Call log display screen messages.........................33 Delete all old messages..................43 Record, play or delete memos........44 Message window displays...............45 Remote access................................46 Appendix........................................
Getting started Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in case it is necessary to ship your telephone for warranty service.
Getting started Telephone base and charger installation Install the telephone base and charger(s) as shown below. If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. Contact your DSL service provider for more information about DSL filters. The telephone base comes ready for tabletop use.
Getting started Battery installation Install the battery as shown below. 1. Plug the battery connector securely into the socket inside the handset battery compartment. 2. Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment. 3. Align the cover flat against the battery compartment, then slide it towards the center of the handset until it clicks into place. 4. Charge the handset by placing it in the telephone base or charger.
Getting started Battery charging Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 10 hours of continuous charging. See the table on page 50 for battery operating times.
Getting started Installation options The telephone comes ready for tabletop use. If you want to mount your telephone on a wall, use the provided wall mount bracket to connect with a standard dual-stud telephone wall mount plate. If you do not have this wall mount plate, you can purchase one from many hardware or consumer electronics retailers. You may need a professional to install the wall mount plate. Tabletop to wall mount installation 1.
Getting started Installation options (continued) Wall mount to tabletop installation 1. If the telephone line cord and power adapter cord are bundled, untie them first. 2. Slide the black wall mount bracket up and remove it from the wall mount plate. Unplug the end of the telephone line cord (or DSL filter) from the telephone wall jack. Unplug the power adapter from the power outlet. 3. Slide the telephone base up and remove it from the wall mount bracket. 4.
Getting started Telephone base layout X/DELETE Message window Press to delete the message currently playing (page 42). Shows the number of messages and other answering system information (page 45). When the telephone is not in use, press twice to delete all previously reviewed messages (page 42). /SKIP Press to skip to the next message (page 42). IN USE light Flashes when there is an incoming call, or another telephone sharing the same line is in use.
Getting started Handset layout CHARGE light On when the handset is charging in the telephone base or charger (page 3). /VOLUME Press to enter the directory when the telephone is not in use (page 26). Press to scroll up while in a menu, or in the directory, call log or redial list. During a call or message playback, press to increase the listening volume (page 15 or page 41). When entering numbers or names in the directory, press to move the cursor to the right.
Getting started Handset layout CID /VOLUME Press to review the call log when the telephone is not in use (page 31). Press to scroll down while in a menu, or in the directory, call log or redial list. During a call or message playback, press to decrease the listening volume (page 15 or page 41). When entering numbers or names in the directory, press to move the cursor to the left. MENU/SELECT Press to show the menu. While in a menu, press to select an item, or save an entry or setting.
Telephone settings Using the menu In the ringers menu, you can select the ringer tones and adjust the ringer volume for incoming calls. In the settings menu, you can change and edit the settings for LCD language, voicemail indicators, key tone, date and time, home area code and dial mode. Go to Answering system setup on page 34 for instructions on how to modify your answering system settings using a system handset. To enter the handset menu: 1. Press MENU/SELECT when the handset is not in use. 2.
Telephone settings Ringer volume (handset) >RINGERS You can adjust the ringer volume or turn the ringer off. SETTINGS 1. Press MENU/SELECT when the handset is not in use. 2. Press or to select >RINGERS, then press MENU/SELECT. 3. Press or to select >RINGER VOLUME, then press MENU/SELECT. >RINGER VOLUME RINGER TONE 4. Press or to adjust the volume. A sample of each ringer volume plays as you scroll through the choices. 5. Press MENU/SELECT to save your selection. You hear a confirmation tone.
Telephone settings LCD language >LCD LANGUAGE You can select a language (English, French or Spanish) to be used in all screen displays. CLR VOICEMAIL 1. Press MENU/SELECT when the handset is not in use. 2. Press or to select >SETTINGS, then press MENU/SELECT. 3. Press or to select >LCD LANGUAGE, then press MENU/SELECT. 4. Press or ESPAŇOL. LCD LANGUAGE >ENGLISH to choose ENGLISH, FRANÇAIS or 5. Press MENU/SELECT to save your selection. You hear a confirmation tone.