User's Manual

ManualsBrandsVTech Telecommunications ManualsElectronics1.9GHz DECT Cordless Phone - Base BT Portion

Cell ringer

When you pair an iPhone (iOS4.1 or later) to your DS6673, the DS6673 handsets

play your iPhone’s ringer when you receive a call on your iPhone.

Press MENU when the phone is not in use.

Scroll to Bluetooth >> Press SELECT.

Scroll to Cell ringer >> Press SELECT.

Scroll to choose On or Off >> Press SELECT.

Download phonebook

Press MENU when the phone is not in use.

Scroll to Bluetooth >> Press SELECT.

Scroll to Download PB >> Press SELECT.

Scroll to select the desired cell phone >> Press SELECT.

Using the handset menu

Press MENU when the phone is not in use.

Press

until the screen displays the desired

feature menu.

Press SELECT to enter that menu.

To return to the previous menu, press CANCEL.

To return to idle mode, press and hold CANCEL.

Telephone settings

Default settings are indicated by asterisks(*).

Settings menu Description Options

LCD language Set the screen display language. English*;

Français;

Español

Voice language Set the announcement broadcast language. English*;

Français

Voicemail # Set the voicemail number for speed dial. Voicemail #

Clr voicemail Turn off the voicemail indicators (see the

note below).

Reset Voicemail

Indicator?

Key tone Set the volume of the audible beep whenever

a key is pressed, or turn it off.

Level 1; 2*; 3;

Off

CID time sync Set to synchronize the time in the caller ID log. On*;

Off

Dial mode Set the telephone to be touch-tone or

pulse dialing.

Touch-tone*;

Pulse

Use the Clr voicemail feature when the telephone indicates there is new voicemail

but there is none. For example, when you have accessed your voicemail while away

from home. The Clr voicemail feature only turns off the indicators; it does not delete

your voicemail messages. As long as you have new voicemail messages, your

telephone service provider continues to send the signal that turns on the indicators.

The following are some of the telephone features you may wish to set. Refer

to Telephone settings in the online Complete user’s manual for detailed

instructions for setting all telephone features.

Set date and time

If you subscribe to caller ID service, the day, month and time are set automatically

with each incoming call. You can also set the date and time manually.

Press MENU when the handset is not in use.

Scroll toto Set date/time >> Press SELECT.

Enter the month, date and year >> Press SELECT.

Enter the hour and minute.

Scroll to choose AM or PM >> Press SELECT.

Ringer volume

You can adjust the ringer volume level, or turn the ringer off.

Press MENU when the handset is not in use.

Scroll to Ringers >> Press SELECT twice.

Scroll to adjust the volume >> Press SELECT.

If the handset ringer volume is set to off, that handset is silenced for all incoming

calls except paging tone.

•

Summary of content (10 pages)

PAGE 1
Cell ringer When you pair an iPhone (iOS4.1 or later) to your DS6673, the DS6673 handsets play your iPhone’s ringer when you receive a call on your iPhone. . Press MENU when the phone is not in use. . Scroll to Bluetooth >> Press SELECT. 3. Scroll to Cell ringer >> Press SELECT. 4. Scroll to choose On or Off >> Press SELECT. Download phonebook . . 3. 4. Press MENU when the phone is not in use. Scroll to Bluetooth >> Press SELECT. Scroll to Download PB >> Press SELECT.
PAGE 2
Quiet mode You can turn on the quiet mode for a period of time. During this period, all tones (except paging tone) and call screening are muted. When you turn on the quiet mode, the answering system turns on automatically. . Press and hold when the handset is not in use. . Use the dialing keys (0-9) to enter the duration >> Press SELECT to save. • To turn off the quiet mode, press and hold when the handset is not in use.
PAGE 3
Find handset Use this feature to find all system handsets and headset. To start paging: • Press FIND HANDSET on the telephone base. All idle handsets ring and display ** Paging **. The headset rings and blinks in blue. To end paging: • Press FIND HANDSET again on the telephone base. • Press /HOME, , CANCEL or any dialing key on the handset. • Place the handset in the telephone base or charger. • Press on the headset. Do not press and hold FIND HANDSET for more than four seconds.
PAGE 4
While entering numbers and names, you can: • Press DELETE to erase a digit or character. • Press and hold DELETE to erase the entire entry. • Press or to move the cursor to the left or right. • Press and hold PAUSE to insert a dialing pause (for entering phone numbers only). • Press /auA to switch the character between upper and lower case (for entering names only). • Press 0 to add a space (for entering names only). To review and dial from the phonebook: Entries are sorted alphabetically. .
PAGE 5
Answering system settings Default settings are indicated by asterisks (*). Settings menu Description Options Call screening Set whether you hear the callers while they are leaving messages to you. On*; Off # of rings Set the number of times the telephone rings before the answering system answers. 4*; 3; 2; Toll saver; 6; 5 Remote code Set a two-digit security code to access the answering system remotely from any touch-tone telephone.
PAGE 6
To register a handset: . Place the new/non-registered handset in the telephone base. Do not place the handset in the charger. . The handset shows Registering... Please wait, then Handset X Registered and you hear a beep when the registration process completes. The registration process takes about 90 seconds to complete. You can add one more cordless headset (IS6100, purchased separately) to your telephone system. The headset must be registered with the telephone base before use. To register a headset: .
PAGE 7
• Charge the battery in the handset for up to 12 hours. • If the battery is completely depleted, charge the handset for at least 30 minutes before use. • Remove the battery and then install it again. If that still does not work, it may be necessary to purchase a new battery. • Disconnect the telephone base from the telephone wall jack and plug in a working telephone. If the other telephone does not work, the problem is probably in the wiring or telephone service. Contact your telephone service provider.
PAGE 8
Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that: Pacemaker patients • Should keep wireless telephones at least six inches from the pacemaker.
PAGE 9
Limited warranty What does this limited warranty cover? The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions.
PAGE 10
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more.