ErisStation TM SIP Conference Phone with Wireless Mics User’s manual busines sphones.v tec h.
Congratulations on purchasing your new VTech product. Before using this product, please read Important safety instructions on page ii of this manual. This manual includes the information and procedures necessary to install and operate your new VTech product. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich VTech product. For support, shopping, and everything new at VTech, visit our website at http://businessphones.vtech.com.
Important safety instructions When using your ErisStation Conference Phone with Wireless Mics, basic safety precautions should DOZD\V EH IROORZHG WR UHGXFH WKH ULVN RI ¿UH HOHFWULF VKRFN DQG LQMXU\ WR SHUVRQV LQFOXGLQJ WKH IROORZLQJ 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4.
wrong type of battery is used. Use only the supplied rechargeable battery or replacement battery SDFN %7 %7 'R QRW GLVSRVH RI EDWWHULHV LQ D ¿UH 7KH\ PD\ H[SORGH 'LVSRVH RI used battery according to the information in The RBRC® seal. 25. Use only the adapter included with this product.
Table of contents Introduction................................. 1 Phone Features.......................... 22 About ErisStation Conference Phone with Wireless Mics.............................1 Parts checklist........................................1 Using the Features menu .....................22 Using the Call menu .............................23 Using the local directory .......................27 Call history ............................................30 Using Speed Dial..............................
Table of contents About wireless mics.................. 58 Maintenance............................... 59 FCC, ACTA and IC regulations ................................. 60 ® The RBRC seal ......................... 61 California Energy Commission battery charging testing instructions ................................ 62 For C-ETL compliance only ...... 62 Mesures de sécurité importantes ................................ 62 Limited warranty........................ 65 7HFKQLFDO VSHFL¿FDWLRQV ...........
Introduction About ErisStation Conference Phone with Wireless Mics 7KH (ULV6WDWLRQ &RQIHUHQFH 3KRQH ZLWK :LUHOHVV 0LFV LV GHVLJQHG IRU XVH LQ RI¿FH settings. It consists of a base unit and four wireless mics, enabling participants in different areas of a meeting room to deliver clear conversation in a phone conference. Parts checklist Your conference phone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.
Getting Started Connect base unit Connect the base unit as shown below. Wall outlet E 4 VCS754 3 LAN AC power cord Slots Adapter 1 2 DC power cable (with yellow plugs) Ethernet cable Network switch or router 1. 3OXJ RQH HQG RI WKH '& SRZHU FDEOH LQWR WKH SRZHU MDFN RI WKH EDVH XQLW DQG plug the other end into the VCS754 MDFN RI WKH SRZHU DGDSWHU 5RXWH WKH FRUG through the slots. 2.
Getting Started Install the wireless mic battery 1. Place the battery (with the label THIS SIDE UP IDFLQJ XS LQWR WKH EDWWHU\ compartment. 2. Slide the battery door until it clicks into place. 3ODFH WKH ZLUHOHVV PLF RQWR WKH FKDUJLQJ FUDGOH XQWLO LW LV ÀXVK Note: The status indicator on the wireless mic turns orange when charging, and turns off when the wireless mic is fully charged.
Getting Started Before use Check for dial tone Lift all the wireless mics from the charging cradles, and then put them on the table. After that, press . If you hear a dial tone, and see that the status indicators turn green on both the base unit and the wireless mics, the installation is successful. If you do not hear a dial tone: • Recheck the installation diagram and the connections to the unit. • (QVXUH WKH XQLW LV FRUUHFWO\ FRQ¿JXUHG ZLWK WKH FRUUHFW 6,3 DFFRXQW LQIRUPDWLRQ For more information, see
Getting Started Base unit overview (front) n a b m c d l e k j f g h i 1. Speaker 2. LCD screen 3. Status indicator • Indicates the system status. See also Status indicators overview on page 9. 4. MENU / SELECT • Press to show the menu. • Press to select an item, or save an entry or setting in a menu. 5. Navigation keys S T / W X • Press to scroll up or down while in the menu, phonebook, or call log. • Press to move the cursor right or left while entering names or numbers.
Getting Started 6. • 7. Press to make, answer, or end a call. Dial pad keys • Press to enter numbers or characters. • While editing names, press to add a space. 8. Front microphone 9. MUTE ALL • During a call, press to mute or end mute all microphones in the system. 10. / 3UHVV WR DGMXVW WKH ULQJHU YROXPH 'XULQJ D FDOO SUHVV WR DGMXVW WKH OLVWHQLQJ YROXPH 11. Soft keys • 3UHVV WR SHUIRUP DFWLRQV DV LQGLFDWHG E\ WKH RQ VFUHHQ ODEHOV 12.
Getting Started Base unit overview (rear) a c b d 1. Status indicator • Indicates the system status. See also Status indicators overview on page 9. 2. Rear microphone 3. USB port • For connecting a PC to use the PC speakerphone feature. See page 21. 4.
Getting Started Wireless mic overview 1 2 3 5 4 1. Microphone • Functions as an extended microphone of the base unit during a call. 2. Status indicator • Indicates the system status. See Status indicators overview on page 9. 3. MUTE ALL • During a call, press to mute or end mute all microphones in the system. 4. Battery door 5.
Getting Started Status indicators overview Status indicator on the base unit Power up • Green for about two seconds. On a call • Green during a call. • Red when the system is muted during a call. Call on hold • Flash green slowly. Incoming call • Flash green when there is an incoming call. Status indicator on the wireless mic Power up • Orange for about two seconds. On the cradle • Orange when charging on the cradle except during registration. • )ODVKHV UHG DQG JUHHQ DOWHUQDWHO\ ZKHQ WKH QRQ UHJL
Getting Started Idle screen 7KH ,GOH VFUHHQ DSSHDUV DIWHU WKH SKRQH LV FRQQHFWHG DQG FRQ¿JXUHG IRU \RXU 6,3 PBX service. The Idle screen indicates that you have no active or held calls. )URP WKH ,GOH VFUHHQ \RX FDQ SUHVV • Directory to view the directories that are available to you. See Using the local directory on page 27. • Line WR VHOHFW DQRWKHU OLQH 6,3 $FFRXQW :KHQ \RX PDNH D FDOO WKH SKRQH will use this line.
Getting Started Using the phone menu 1. Press MENU to show the main menu. 2. Press T or S to highlight menu items. 3. Press SELECT or a corresponding dial pad key to select a highlighted menu item. For example, when Features is highlighted, you can press SELECT or you can press 1 on the dial pad to view the Features submenu. 4. Press SELECT or an appropriate soft key to save changes. 5. Press CANCEL to cancel an operation, exit the menu display or return to the idle screen. Main menu items 1.
Conference phone operation Making calls You can make a call at any time by pressing , and then dialing a number. When WKH SKRQH LV LQ LGOH PRGH RU KDV FDOOV RQ KROG \RX FDQ PDNH D FDOO E\ SUH GLDOLQJ D phone number and then pressing or Dial to call the number. To make a call: 1. Press . You hear a dial tone. 2. Use the dial pad keys to enter the desired phone number. • Press Backspc if you enter an incorrect digit.
Conference phone operation When the call is answered, the active call screen appears. Note that the default active call screen soft keys are shown above. Your phone’s soft keys are programmable and may differ from what is shown here. Use a wireless mic during a call 1. During a call, lift a wireless mic from the base unit charging cradle, and then put it on the table. The status indicator on the wireless mic turns green. 2. Speak towards the microphone on the wireless mic.
Conference phone operation ,I D PLVVHG FDOO DOHUW VFUHHQ DSSHDUV \RX FDQ SUHVV • • • Exit to return to the Idle screen. Callback to immediately dial the caller’s number. View to see the caller’s information in the call history. Putting a call on hold Use this feature to hold one call while you access another. The phone also puts calls on hold automatically when you answer another call, transfer a call, or create a conference. To put a call on hold: During a call, press HOLD on the base unit.
Conference phone operation Forwarding calls You can forward an incoming call to another number, either by entering the number yourself, or by selecting a number from the directory or call history (the call history VWRUHV WKH QXPEHUV IRU PLVVHG FDOOV UHFHLYHG FDOOV DQG GLDOHG FDOOV Note
Conference phone operation 3. 6HOHFW WKH &DOO +LVWRU\ IROGHU RU 'LUHFWRU\ \RX ZDQW WR DFFHVV 4. If necessary, press W or X until Dial appears and then press Dial . The Call Forwarded screen appears. Your phone returns to idle mode if you have no other active calls. Transferring calls You can transfer a call to someone else at another phone. If you talk to the transfer recipient before completing the transfer, you are making a “supervised” transfer.
Conference phone operation To cancel the transfer, press: • Cancel on the transfer setup screen. The active call screen reappears. • • End when the second call is active. You will hang up on the second call. Split when the second call is active. You will stay connected to the second FDOO
Conference phone operation Making a conference call You can hold a conference call between yourself and two other callers. To make a conference call: 1. During a call, press Conf . The call is automatically put on hold and the conference setup screen appears. 2. 'LDO WKH VHFRQG QXPEHU IRU WKH RWKHU SDUW\ \RX ZDQW WR MRLQ \RXU FRQIHUHQFH
Conference phone operation To end a conference call: 3UHVV RQH RI WKH IROORZLQJ VRIW NH\V • • • End , to hang up on both calls. Split , to put both calls on hold. The screen shows information for the second FDOO
Conference phone operation To view the Message menu: 1. When the phone is idle, press Menu. 2. With Features highlighted, press SELECT. 3. On the Features menu, press T to highlight Message, and then press SELECT. The Message menu appears. 4. On the Message menu, highlight the desired line and then press SELECT. Redialing 1. From the idle screen, press the X navigation key. The softkey appears. 2. Press to view the Call history menu. 3.
Conference phone operation Locating wireless microphones 7KLV IHDWXUH KHOSV \RX ¿QG DQ\ PLVSODFHG ZLUHOHVV PLFV ZLWKLQ WKH UDQJH RI WKH base unit. To locate wireless microphones: 1. Press MENU, and then highlight and select STATUS. 2. On the Status menu, highlight and select Wireless microphone. 3. On the Wireless microphone menu, press . The base unit screen displays Wireless microphones will ring. Press CANCEL/ Back to stop.
Phone Features Using the Features menu On the Features menu, you can manage incoming calls, use the Directory, access \RXU PHVVDJHV YLHZ WKH &DOO +LVWRU\ DQG PDQDJH \RXU VSHHG GLDO QXPEHUV To access the Features menu: 1. When the phone is idle, press MENU. The Main Menu appears. 2. If necessary, press S or T to highlight Features, and then press SELECT. The Features menu appears. 7KH )HDWXUHV PHQX LQFOXGHV WKH IROORZLQJ LWHPV Setting See Description page… 1.
Phone Features Using the Call menu On the Call menu, you can manage how your phone handles incoming calls. 7KH VHWWLQJV DYDLODEOH RQ WKH &DOO PHQX LQFOXGH Setting See Description page… 1. Do Not Disturb 24
Phone Features To set Do Not Disturb: 1. From the Call menu, if necessary, press S or T to highlight Do Not Disturb. 2. Press SELECT. 3. On the Do Not Disturb menu, highlight the line for which you want to turn Do Not Disturb On or Off. 4. When the desired line is highlighted, press W or X to turn Do Not Disturb On or Off. 5. Press Save . When Do Not Disturb is on, appears on the idle screen. To set Call forward: 1. From the Call menu, press T to highlight Call forward. 2. Press SELECT.
Phone Features 7. Press T. 8. Enter the number to which you would like to forward calls. 9. (If you selected Call forward no ans HDUOLHU 3UHVV T. 10. (If you selected Call forward no ans HDUOLHU 3UHVV W or X to set the No answer delay between 1 to 10 rings. 11. Press Save . When Call forward always is on, appears on the idle screen. To block anonymous callers: 1. From the Call menu, press T to highlight Block anonymous. 2. Press SELECT. The Block anonymous menu appears. 3.
Phone Features To enable missed call alerts: 1. From the Call menu, press T to highlight Missed call alert. 2. Press SELECT. The Missed call alert menu appears. 3. Press W or X to turn missed call alerts on or off. 4. Press Save . To enable call waiting alerts: 1. From the Call menu, press T to highlight Call waiting. 2. Press SELECT. The Call waiting menu appears. 3. Press W or X WR WXUQ FDOO ZDLWLQJ DOHUWV RQ
Phone Features Using the local directory You can store the names and phone numbers for up to 200 contacts in the directory. Once directory entries are saved, you can dial them directly from the directory. You FDQ DOVR VHDUFK GLUHFWRU\ HQWULHV E\ ¿UVW RU ODVW QDPH When adding an entry, you can enter numbers for work, mobile, and other. You can also select a ringtone for that contact. Later, you can edit entries if their contact information changes. To view the local directory: 1.
Phone Features To call a contact: 1. Press S or T or Search to view the desired directory entry. 2. To view other numbers for the entry, press Type 3. When the desired number appears, press or . Dial . Note ,I \RX YLHZ D GLUHFWRU\ HQWU\ ZKHQ WKH SKRQH LV LQ GLDO PRGH SUHVV Dial to dial the number. You can use this feature when making a call, forwarding a call, transferring a call, and setting up a conference call. To add a directory entry: 1.
Phone Features To search directory entries: 1. From the Local or Blacklist directory, press W or X until the Search soft key appears. 2. Press Search . The search screen appears. 3. 7R ¿OWHU \RXU VHDUFK E\ ¿UVW QDPH RU ODVW QDPH SUHVV W or X. 4. Press T to move to the Search ¿HOG 5. 3UHVV D GLDO SDG NH\ WR HQWHU D OHWWHU IRU \RXU ¿UVW QDPH RU ODVW QDPH VHDUFK Press 2 once for A, or three times for C, for example. 6.
Phone Features Call history The call history provides available name and number information for the last 200 incoming and outgoing calls. The newest entries replace the oldest. You can view FDOO KLVWRU\ LQIRUPDWLRQ IRU • All calls—all categories of calls • Missed calls—incoming calls that were not answered • 5HFHLYHG FDOOV²LQFRPLQJ FDOOV WKDW \RX DQVZHUHG IRUZDUGHG RU UHMHFWHG • Dialed calls—all outgoing calls. You can use this as a redial list. To view the call history: 1.
Phone Features 7KH IROORZLQJ VRIW NH\V DUH DYDLODEOH ZKHQ YLHZLQJ D FDOO KLVWRU\ HQWU\ Delete Deletes the entry Save Saves the call information to the local directory Dial Dials the entry Edit Dial Displays the predial screen so you can edit the number before dialing To call a call history entry: While viewing the desired entry, press immediately. or Dial . The phone dials the number ±RU± Press Edit Dial . The predial screen appears, allowing you to edit the number before pressing Dial .
Phone Features • If necessary, edit the name and number. Press T to move the cursor to the next line. • Press Backspc to delete incorrect characters. 4. Press Save to save the entry. To delete a single call history entry: While viewing the desired entry, press Delete . To delete multiple call history entries: 1. While viewing the list of call history folders, press T to highlight the folder for ZKLFK \RX ZRXOG OLNH WR GHOHWH DOO HQWULHV $OO FDOOV 0LVVHG FDOOV 5HFHLYHG FDOOV or Dialed calls. 2.
Phone Features Using Speed Dial The speed dial menu allows you to enter up to 10 numbers that you dial frequently. To dial a speed dial number, press and hold the dial pad key that matches the speed dial entry number (for entry 10, press and hold 0 You can also enter speed dial numbers using the WebUI. See Speed Dial on page 47. Entering speed dial numbers To add a speed dial entry: 1. When the phone is idle, press Menu. 2. With Features highlighted, press SELECT. 3.
&RQ¿JXULQJ WKH 3KRQH +RZ WR FRQ¿JXUH WKH SKRQH
&RQ¿JXULQJ WKH 3KRQH Preferences Use the Preferences menu to set the language, date and time formats, and restart the phone. To use the Preferences menu: 1. From the User Settings menu, ensure that Preferences is highlighted, and then press SELECT. The Preferences menu appears. 2. Press S or T to highlight the desired option, and then press SELECT. The DYDLODEOH RSWLRQV DUH • Language • Date & Time • Restart phone Setting the language 1.
&RQ¿JXULQJ WKH 3KRQH Setting date and time preferences From the Preferences menu, press T to highlight Date & Time, and then press SELECT. The Date & Time menu appears. Note ,I WKH 1HWZRUN 7LPH 3URWRFRO 173 VHUYHU LV HQDEOHG \RX FDQQRW PDQXDOO\ VHW the date and time using this this menu. To set the time format: 1. From the Date & Time menu, ensure that Clock Time is highlighted. 2. Press W or X WR VHOHFW D KRXU FORFN DP SP RU KRXU FORFN 3. Press Save .
&RQ¿JXULQJ WKH 3KRQH To manually set the Year, Month, Day, Hour and Minute: 1. From the Date & Time menu, press T to highlight Set manually. 2. Press SELECT. Note ,I WKH 173 VHUYHU LV HQDEOHG ZKHQ \RX SUHVV SELECT a message appears informing you that date and time cannot be edited. See To enable or disable the NTP (Network Time Protocol) server on page 36. 3. For each setting, press W or X to select the desired setting, and then press T to move to the next line. 4. :KHQ \RX KDYH ¿QLVKHG SUHVV Save .
&RQ¿JXULQJ WKH 3KRQH To set the backlight off timeout: 1. From the Display menu, press T to highlight Timeout. 2. Press W or X WR VHOHFW EHWZHHQ DQG VHFRQGV DW VHFRQG LQWHUYDOV VHFRQGV LV WKH GHIDXOW VHWWLQJ 3. Press Save . Audio Use the Audio menu to pick one of ten ringer tones, and turn key tones on and off. Note 7R DGMXVW WKH ULQJHU YROXPH SUHVV WKH / keys while the phone is idle.
&RQ¿JXULQJ WKH 3KRQH To set the key tone: 1. From the Audio menu, press T to highlight Key tone and then press SELECT. The Key tone menu appears. 2. On the Key tone menu, press W or X to turn key tones on or off. When off, key presses are silent. 3. Press Save .
Wireless Mic Registration Your wireless micV DUH SUH UHJLVWHUHG ,I \RX QHHG WR SXUFKDVH UHSODFHPHQW ZLUHOHVV mics (model VCS754-WM YLVLW RXU ZHEVLWH DW http://businessphones.vtech.com or call 1-888-370-2006.
WebUI Using the WebUI 8VH DQ ,QWHUQHW EURZVHU WR DFFHVV WKH :HE 8VHU ,QWHUIDFH :HE8, WKDW UHVLGHV RQ WKH FRQIHUHQFH SKRQH $IWHU \RX ORJ RQ WR WKH :HE8, \RX FDQ FRQ¿JXUH WKH IROORZLQJ IHDWXUHV • &DOO 6HWWLQJV 6HH SDJH • 8VHU 3UHIHUHQFHV 6HH SDJH • 6SHHG 'LDO 6HH SDJH • /RFDO 'LUHFWRU\ 6HH SDJH • %ODFNOLVW 6HH SDJH • &DOO +LVWRU\ 9LHZ RQO\
WebUI 6. Under Password, enter user WKH GHIDXOW SDVVZRUG RU \RXU RZQ SDVVZRUG LI you have already changed the default password. You can change a password after you log on. 7. Click Log In. The WebUI appears. Click topics from the navigation bar at the top of the page, and then click the desired setting on the left side of the WebUI to see the page for that setting. You view and FKDQJH VHWWLQJV LQ WZR GLIIHUHQW W\SHV RI ¿HOGV GURS GRZQ OLVWV DQG HQWU\ ¿HOGV LQWR which you type information.
WebUI Call Settings To view the call settings, click SYSTEM in the WebUI header, and then click Call Settings LQ WKH VLGHEDU
WebUI Call Forward Settings Setting Description Enable Call Forward Select to enable call forwarding for all calls on that account. Always Target Number Enter a number to which all calls will be forwarded. Enable Call Forward Select to enable call forwarding for calls when you are on another call Busy on that account. Target Number Enter a number to which calls will be forwarded when the line is busy. Enable Call Forward Select to enable call forwarding for unanswered calls on that account.
WebUI User Preferences 2Q WKH 8VHU 3UHIHUHQFHV SDJH \RX FDQ FRQ¿JXUH VRPH EDVLF VHWWLQJV IRU \RXU phone and set how your phone responds to calls. After changing any settings on this page, click Save to save them. General User Settings Setting Description Range Default WebUI Language Sets the language that appears on the WebUI. Any language supported by your phone. For example, English, French, Spanish, etc. English Phone Language Sets the language that appears on your phone.
WebUI User Preferences (continued) Call Hold Reminder Settings Setting Description Range Default (QDEOH &DOO +ROG Reminder Tone Enables or disables the call hold reminder tone. n/a — Select to enable Enabled 7RQH ,QWHUYDO VHFV Sets the interval for the call hold reminder tone.
WebUI Speed Dial The speed dial keys are used for dialing numbers with one key press. To view the speed dial keys, click SYSTEM in the WebUI header, and then click Speed Dial in the sidebar. On the Speed Dial page, you can enter up to 10 numbers that you dial frequently. To dial a speed dial number, press and hold the dial pad key that matches the speed dial HQWU\ QXPEHU IRU HQWU\ SUHVV )RU HDFK VSHHG GLDO QXPEHU \RX HQWHU \RX PXVW assign the account on which the number will be dialed out.
WebUI Directory To view the local directory, click CONTACTS in the WebUI header, and then click Local Directory in the sidebar. On the Local Directory page, you can manage your local directory entries. You can sort, edit, delete, and add contact information for up to 200 entries. The page also DOORZV \RX WR H[SRUW \RXU SKRQH¶V ORFDO GLUHFWRU\ RU LPSRUW D ORFDO GLUHFWRU\ ¿OH 7KH export function lets you back up your contacts to your computer. Phone numbers appear as links.
WebUI Local Directory Click To... Sort the list by last name. Edit information for an entry. View the last page of entries. View the next page of entries. Delete selected entries from the directory. Click Select All to select every entry on the page you are viewing. Add a new directory entry. Delete all Directory entries To add a new directory entry: 1. Click Add New Entry. The Create Local Directory Entry page appears. 2.
WebUI To edit a directory entry: 1. Click Edit for the entry you want to edit. The Edit Local Directory Entry page appears. 2. Edit or add the desired information. 3. Click Save. Import Local Directory
WebUI User Password On the User Password page, you can change the password you use to log on to WKH :HE8, %\ FKDQJLQJ \RXU SDVVZRUG IURP WKH GHIDXOW SDVVZRUG ³XVHU´ \RX FDQ prevent others from logging on to the WebUI remotely and changing your settings. To view the User Password page, click Servicing on the WebUI header. The User Password page appears.
Appendix Battery It takes up to 8 hours for the wireless mic battery to be fully charged (the orange VWDWXV LQGLFDWRU WXUQV RII $OZD\V UHWXUQ WKH ZLUHOHVV PLFV WR WKH FKDUJLQJ FUDGOHV DIWHU XVH :KHQ LW LV IXOO\ FKDUJHG \RX FDQ H[SHFW WKH IROORZLQJ RSHUDWLQJ WLPHV Operation Operating time :KLOH WKH ZLUHOHVV PLF LV LQ XVH WDONLQJ Up to 8 hours :KLOH QRW LQ XVH VWDQGE\ Up to 70 hours $FWXDO WDON WLPH ZLOO EH VKRUWHU IRU FDOOV XVLQJ +' DXGLR * ** The wireless mic is not charging or in use
Troubleshooting ,I \RX KDYH GLI¿FXOW\ ZLWK \RXU FRQIHUHQFH SKRQH SOHDVH WU\ WKH VXJJHVWLRQV EHORZ For customer service, visit our website at http://businessphones.vtech.com or call 1-888-370-2006. Finding the software version As part of troubleshooting, you may be asked to provide the software version of the conference phone. To view the software version of your phone: 1. When the phone is idle, press MENU. 2. On the Main menu, press T to highlight Status, and then press SELECT. 3.
Troubleshooting The base unit does not ring when there is an incoming call. • Make sure there is a dial tone before dialing. • 0DNH VXUH WKH ULQJHU YROXPH RI WKH EDVH XQLW LV QRW VHW WR RII SDJH • Make sure the DC power cable, Ethernet cable, AC power cord, and the power DGDSWHU DUH SOXJJHG LQ SURSHUO\ SDJH • ,I RWKHU WHOHSKRQHV LQ \RXU RI¿FH DUH KDYLQJ WKH VDPH SUREOHP WKH SUREOHP LV LQ WKH ZLULQJ RU ,3 3%; VHUYLFH &RQWDFW \RXU VHUYLFH SURYLGHU FKDUJHV PD\ DSSO\ or system administrator.
Troubleshooting If that still does not work, you might have a defective battery or a defective wireless mic. Please contact customer service for assistance. Note: Every time the base unit is powered up, the wireless mics will need some time to connect to the base unit. Please allow at least one minute for the wireless mic and base unit to synchronize before use after the base unit has powered up.
Troubleshooting The status indicator on the wireless mic does not turn orange when in charging cradle. • The wireless mic might be fully charged. • Clean the charging contacts on the wireless mic and the charging cradles each PRQWK ZLWK D SHQFLO HUDVHU RU D GU\ QRQ DEUDVLYH IDEULF • Make sure the DC power cable, telephone line cord, AC power cord, and the SRZHU DGDSWHU DUH SOXJJHG LQ SURSHUO\ SDJH • 0DNH VXUH WKH ZLUHOHVV PLF LV SODFHG LQ WKH FKDUJLQJ FUDGOH FRUUHFWO\ SDJH • Unplug the power cab
Troubleshooting I have accidentally set my LCD language to Spanish or French, and I don’t know how to change it back to English. • When the base unit is not in use or on a call, press 0(18 ĺ ĺ ĺ ĺ . Common cure for electronic equipment. • If the telephone is not responding normally, put the wireless mics onto the FKDUJLQJ FUDGOHV ,I LW GRHV QRW UHVSRQG WU\ WKH IROORZLQJ LQ WKH RUGHU OLVWHG 1. Disconnect the power to the base unit. 2. Remove the battery from the wireless mics. 3.
Precautions for users of implanted cardiac pacemakers &DUGLDF SDFHPDNHUV DSSOLHV RQO\ WR GLJLWDO FRUGOHVV WHOHSKRQHV :LUHOHVV 7HFKQRORJ\ 5HVHDUFK //& :75 DQ LQGHSHQGHQW UHVHDUFK HQWLW\ OHG D PXOWLGLVFLSOLQDU\ evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. 6XSSRUWHG E\ WKH 8 6 )RRG DQG 'UXJ $GPLQLVWUDWLRQ :75 UHFRPPHQGV WR SK\VLFLDQV WKDW Pacemaker patients • Should keep the wireless telephone at least six inches from the pacemaker.
Maintenance Taking care of your ErisStation Conference Phone with Wireless Mics Your conference phone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the wireless mic down gently. Save the original packing materials to protect your ErisStation Conference Phone with Wireless Mics if you ever need to ship it. Avoid water Your ErisStation Conference Phone with Wireless Mics can be damaged if it gets wet.
FCC, ACTA and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device XQGHU 3DUW RI WKH )HGHUDO &RPPXQLFDWLRQV &RPPLVVLRQ )&& UXOHV 7KHVH UHTXLUHPHQWV DUH LQWHQGHG to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with WKH LQVWUXFWLRQV PD\ FDXVH KDUPIXO LQWHUIHUHQFH WR UDG
FCC, ACTA and IC regulations ,I WKLV HTXLSPHQW LV PDOIXQFWLRQLQJ LW PXVW EH XQSOXJJHG IURP WKH PRGXODU MDFN XQWLO WKH SUREOHP KDV EHHQ corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited warranty. If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service.
California Energy Commission battery charging testing instructions 7KLV WHOHSKRQH LV VHW XS WR FRPSO\ ZLWK WKH HQHUJ\ FRQVHUYLQJ VWDQGDUGV ULJKW RXW RI WKH ER[ 7KHVH LQVWUXFWLRQV DUH LQWHQGHG IRU &DOLIRUQLD (QHUJ\ &RPPLVVLRQ &(& FRPSOLDQFH WHVWLQJ RQO\ :KHQ WKH CEC battery charging testing mode is activated, all telephone functions, except battery charging, will be disabled. To activate the CEC battery charging testing mode: 1.
8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Ne déposez rien sur le cordon d’alimentation. Installez cet appareil dans un endroit sécuritaire, là où personne ne pourra trébucher sur la ligne d’alimentation ni le cordon téléphonique modulaire. 1¶HQIRQFH] MDPDLV G¶REMHWV GDQV OHV IHQWHV GX VRFOH RX GX PLFURSKRQH VDQV ¿O FDU FHFL ULVTXHUDLW G¶HQWUHU HQ FRQWDFW DYHF GHV SRLQWV GH WHQVLRQ GDQJHUHX[ RX SURYRTXHU XQ FRXUW FLUFXLW 1¶pFKDSSH] pas de liquides dans l’appareil.
For C-ETL compliance only Pile • • • • • 0,6( (1 *$5'( 1¶XWLOLVH] TXH OD SLOH LQFOXVH 1H MHWH] SDV OD SLOH DX IHX 9pULILH] OHV LQVWUXFWLRQV VSpFLILTXHV GH PLVH DX[ UHEXV DXSUès des autorités locales. N’ouvrez pas et ne mutilez pas la pile. L’électrolyte qui s’en échapperait est corrosif et pourrait causer des brûlures ou des blessures aux yeux ou à la peau. L’électrolyte est toxique si avalé. 6R\H] SUXGHQWV ORUVTXH YRXV PDQLSXOH] OHV SLOHV DILQ G¶pYLWHU OHV FRXUWV FLUFXLWV SURYRTXpV SDU GHV matériaux
Limited warranty What does this limited warranty cover? The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or ³\RX´ WKDW WKH 3URGXFW DQG DOO DFFHVVRULHV SURYLGHG LQ WKH VDOHV SDFNDJH ³3URGXFW´ DUH IUHH IURP GHIHFWV in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions.
Limited warranty How do you get warranty service? To obtain warranty service in the USA, please visit our website at http://businessphones.vtech.com or call 1-888-370-2006. NOTE %HIRUH FDOOLQJ IRU VHUYLFH SOHDVH UHYLHZ WKH XVHU¶V PDQXDO D FKHFN RI WKH 3URGXFW¶V FRQWUROV DQG features may save you a service call.
7HFKQLFDO VSHFL¿FDWLRQV Frequency control Crystal controlled PLL synthesizer Transmit frequency :LUHOHVV PLF ± 0+] %DVH XQLW ± 0+] Channels 5 Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use.
'HVLJQHG WR ¿W \RXU KRPH And your life. VTech Communications, Inc. $ PHPEHU RI 7+( 97(&+ *5283 2) &203$1,(6 97HFK LV D UHJLVWHUHG WUDGHPDUN RI 97HFK +ROGLQJV /LPLWHG ErisStationTM and Orbitlink Wireless TechnologyTM are trademarks of VTech Communications, Inc. Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. 6SHFL¿FDWLRQV DUH VXEMHFW WR FKDQJH ZLWKRXW QRWLFH © 2015 for VTech Communications, Inc. All rights reserved.
