Owner's Manual

6
1. Attach the LEGS by inserting them
into the appropriate holes located
on the bottom of the MAIN UNIT.
Insert the legs labeled with an “A”
into the holes marked “A” and the
legs labeled with a “B” into the
holes marked “B”. Push the legs
until they are fully inserted and you
hear a click sound. Once they have
been attached, they cannot be
removed again.
2. Attach the RIGHT PANEL onto the
right side of the MAIN UNIT near
the stove. Hold the right panel as
shown in the picture with the grated
side positioned vertically. On the
main unit, locate the bar with two
movable pins. Insert one of the pins
into the hole on the panel. Then use
your finger to depress and insert
the other pin into the panel. Press
the right panel firmly to ensure it is
secure.
3. Attach the LEFT PANEL onto the
left side of the MAIN UNIT near
the faucet. Hold the left panel as
shown in the picture with the grated
side positioned vertically. On the
main unit, locate the bar with two
movable pins. Insert one of the pins
into the hole on the panel. Then use
your finger to depress and insert
the other pin into the panel. Press
the left panel firmly to ensure it is
secure.
ASSEMBLY INSTRUCTIONS