User’s Manual Sit-to-Race Smart Wheels TM © 2012 VTech Printed in China 91-002768-007 US
Dear Parent, Ever notice the look on your baby’s face when they learn something new through their own discovery? These self-accomplished moments are a parent’s greatest reward. To help fulfill them, VTech® created the Infant Learning® series of toys.
INTRODUCTION Thank you for purchasing the VTech® Sit-to-Race Smart WheelsTM learning toy! HANDLE BARS FOUR NUMBER BUTTONS mode SELECTOR Twist KNOB volume Control Switch horn button ROCKER BECOMES OPTIONAL PARENT HANDLE Introduction Rock, ride and learn with the Sit-to-Race Smart WheelsTM by VTech®! This ride-on toy grows with your child and helps them learn numbers, gross motor skills, pretend play, and more! For the younger child, the dashboard activity panel can be played with on the floor and featu
INCLUDED IN THIS PACKAGE – One body – Two handle bars – Rocker/parent handle pieces – Four wheels, two axles, four cylinders, fasteners and spindles – One user’s manual Included in This Package – One electronic dashboard activity panel
WARNING: All packing materials, such as tape, plastic sheets, packaging locks and tags are not part of this toy, and should be discarded for your child’s safety. ATTENTION Pour la sécurité de votre enfant, débarrassez-vous de tous les produits d’emballage tels que rubans adhésifs, feuilles de plastique, attaches et étiquettes. Ils ne font pas partie du jouet. INSTRUCTIONS BATTERY INSTALLATION 1. Make sure the unit is turned OFF. 2. Locate the battery cover on the bottom of the dashboard activity panel.
Product Assembly CAUTION: With the VTech ® Sit-to-Race Smart Wheels , safety comes first. To ensure your child’s safety, please only assemble this product by an adult. This package contains four small screws. For your child’s safety, do not let your child play with the toy until it is fully assembled. Adult supervision required. TM ASSEMBLY INSTRUCTIONS Product Assembly zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries. • Do not use damaged batteries.
Cover with a fastener, with the spindle side up and aligned with the hole in the axle, then insert the spindle through the hole in the axle. Put a cover over the fastener, aligning the holes in the cover with the holes in the fastener. Insert two screws into the cover and tighten with a screwdriver. Repeat this process for the second wheel. Product Assembly Insert another yellow cylinder and one wheel onto the open end of the axle.
4. To assemble the parent handle, first insert the handle grip into the middle support. Attach each side piece by pushing down the locks on the side piece and inserting the male parts of the handle grip and middle support into the corresponding female parts of the side piece. You will hear the side pieces click into place. 5. Place the bottom of the parent handle onto the back axle at a 45-degree angle, then rotate the handle up to connect to the rear of the seat.
Converting the Sit-to-Race Smart TM Wheels 1. To convert to rocker mode, press and hold the green button on the side of the seat, loosen the large screw on the handle, then rotate the handle to a horizontal position under the body. Product Conversion Warning! • Not to be used by children over 36 months due to insufficient strength. 42 pounds max. ATTENTION ! • This toy should be operated in a safe area. • Please ensure young children are supervised by an adult.
Secure the handle by tightening the large screw. PLEASE NOTE: • The handle is designed for parental use only. This product should not be used by a child as a push toy. 3. To remove the handle in ride-on mode, press and hold the green button on the seat and unscrew the large screw. Then, move the handle to a 45-degree angle and remove it from the axle. Product Conversion 2. To convert to ride-on mode, squeeze the two locks under the front wheels to disconnect the handle.
To avoid injury caused by the lock on the neck of the body, please keep the body out of your child’s reach when playing with the dashboard activity panel by itself on the floor. Product Features 4. To remove the dashboard activity panel from the body, turn over the body and squeeze the green locks inside, under the activity panel. Remove the dashboard activity panel from the body. PRODUCT FEATURES 1.
2. VOLUME CONTROL SWITCH To adjust the volume, slide the VOLUME CONTROL SWITCH on the dashboard activity panel to the LOW VOLUME ( )or the HIGH VOLUME ( ) position. 3. AUTOMATIC SHUT-OFF ACTIVITIES 1. Slide the mode selector to the learning mode or discovery mode position to turn the unit on. You will hear a song, a playful phrase and the horn sound. The light will flash with the sounds. 2.
Twist the twist knob to hear fun engine sounds. The light will flash with the sounds. 4. Press the four number buttons to learn numbers, objects and places, You’ll also hear sounds and an encouraging phrase. The light will flash with the sounds. 5. Rock and ride the bike to hear fun sounds and melodies. The light will flash with the sounds. Activities 3. 6. If there is no input to the unit after approximately 8 seconds, you will hear a question, which will encourage you to find the correct object.
1. I’ve Been Working on the Railroad 2. The Glow Worm 3. Three Blind Mice 4. The Wheels on the Bus 5. Oh, Where, Oh, Where Has My Little Dog Gone? 6. Twinkle, Twinkle, Little Star 7. Three Little Kittens 8. Polly Wolly Doodle 9. This Old Man 10. Jack & Jill 11. Here We Go ‘Round the Mulberry Bush 12. London Bridge 13. Skip to My Lou 14. Hey Diddle Diddle 15. It’s Raining, It’s Pouring 16. Pease Porridge Hot Melody List MELODY LIST: SING-ALONG SONGS Song 1 We’re on our way, Riding all around town.
Song 2 It’s time to ride. Let’s ride and play. Where would you like to ride today? CARE & MAINTENANCE 1. Keep the unit clean by wiping it with a slightly damp cloth. 2. Keep the unit out of direct sunlight and away from any direct heat source. 3. Remove the batteries when the unit is not in use for an extended period of time. 4. Do not drop the unit on a hard surface and do not expose the unit to moisture or water.
TROUBLESHOOTING If for some reason the program/activity stops working or malfunctions, please follow these steps: 1. Turn the unit OFF. 2. Interrupt the power supply by removing the batteries. 3. Let the unit stand for a few minutes, then replace the batteries. 4. Turn the unit ON. The unit should now be ready to play again. If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a service representative will be happy to help you.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and uses radio frequency energy and if not installed and used in accordance with the manufacturer’s instructions, may cause interference to radio communications.
The left handle bar The right handle bar PLEASE NOTE: • Please assemble the product according to the above image. • Please be sure the handle bars are correctly attached to the dashboard activity panel. The handle bars should not be removable once attached.