Quick Start Guide

Specifications are subject to change without notice.
© 2018 VTech Communications, Inc.
All rights reserved. 03/19. VM320-2_QSG_V1.
Document order number:
Quick start guide
VM320
VM320-2
Video Monitor
Go to www.vtechphones.com
to register your product for
enhanced warranty support and
the latest VTech product news.
What’s in the box
VM320 VM320-2
1
Connect the baby monitor
NOTESNOTE
• The rechargeable battery is pre-installed in your parent unit.
• Use only the power adapters supplied with this product.
• Make sure the baby monitor is not connected to an electric outlet that is controlled by a switch.
• Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are
not designed to hold the weight of baby monitor, so do not connect them to any ceiling, under-
the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.
• Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.
2
Power on or off the baby monitor
Slide the ON/OFF switch to
power on or off your baby unit.
Slide the ON/OFF switch to power
on or off your parent unit.
Caution
• The default volume of your parent unit is level
3, and the maximum volume is level 5. If you
experience high-pitched screeching noise from
your baby monitor while positioning:
- Make sure your baby unit and parent unit are more
than 1 meter (3 feet) apart, OR
- Turn down the volume of your parent unit.
3
Positioning the baby monitor
> 3ft (1m)
4
Status check
Once you power on both your baby unit and parent unit, your parent unit displays image
from the baby unit, and the connection status displays on the LCD screen.
The POWER LED light of baby unit turns on.
Adjust speaker volume
Press VOL / VOL to adjust your parent unit
speaker volume. Even if you have set the parent
unit volume to the maximum, you may not hear
sound from the baby unit. It depends on the
sensitivity setting.
Zoom
Press to zoom in or out.
Talk to your baby unit
Press and hold TALK and speak to your
parent unit. Your voice is transmitted to
the baby unit.
Use the menu
Press to enter the menu, choose a menu item, or save a setting. You
can use the parent unit for advanced settings or operations, such as to
adjust the baby unit sound sensitivity or the temperature range for alerts.
While in the menu:
• Press or to scroll among the menu options.
• Press or to enter the desired submenu.
• Press or to select an item.
• Press to confirm
your selection.
• Press to exit the
menu or submenu.
Main menu
Submenu
Set screen off timer
1. Press to enter the main menu when
the parent unit is idle.
2. Press or to choose , then press or
to open the submenu.
3. Press or to choose the desired time
period to automatically turn off screen ( /
- 5 min./ - 30 min. / - 60min.), then
press to confirm your selection.
NOTESNOTE
Note
• Press any keys on the parent unit to turn on the screen
again.
Basic operation - Parent unit
Press and hold
6U]KXOTMUT
3OYKKTLUTIZOUT
6U]KXOTMULL
3OYKKTLUTIZOUT
6U]KXOTMUT
3
OYK
K
TLUTIZOUT
>
<
3ft (1m)
3ft (1m)
NOTESNOTE
Note
• To avoid interference from other electronic devices,
place your baby monitor at least 3 feet (1 meter) away
from devices such as wireless routers, microwaves, cell
phones and computers.
≥
<
3ft (1m)
3ft (1m)
﹏﹏﹏
﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏
﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏