77000IM04.indd 1 Dear Parent: Ever notice the look on your baby’s face when they learn something new through their own discovery? These self-accomplished moments are a parent’s greatest reward. To help fulfill them, VTech® created the Infant Learning series of toys.
INTRODUCTION Thank you for purchasing the VTech® Sit-to-Stand Learning Walker learning toy. TM The Sit-to-Stand Learning Walker is part of the Sit-to-Stand series of toys developed to grow with baby. Little ones can play with the standalone activity panel on the floor while discovering animals, colors, music, shapes and numbers.
INCLUDED IN THIS PACKAGE • One electronic activity panel • One main walker body • Two legs with wheels • One walker handle • One telephone handset WARNING: All packing materials, such as tape, plastic sheets, wire ties and tags are not part of this toy, and should be discarded for your child’s safety. GETTING STARTED BATTERY INSTALLATION 1. Make sure the unit is turned OFF. 2. Locate the battery cover on the bottom of the electronic activity panel. Use a coin or a screwdriver to loosen the screw.
BATTERY NOTICE • Install batteries correctly observing the polarity (+, -) signs to avoid leakage. • Do not mix old and new batteries. • Do not mix batteries of different types: alkaline, standard (carbonzinc) or rechargeable (nickel-cadmium). • Remove the batteries from the equipment when the unit will not be used for an extended period of time. • Do not dispose of batteries in fire. • Do not attempt to recharge ordinary batteries. • The supply terminals are not to be short-circuited.
ASSEMBLY INSTRUCTIONS 2. Insert the legs into the slots with the wheels facing outward, as shown in the diagram. Assembly Instructions 1. Push in and unscrew the two fasteners at the top of the walker. 3. Gently pull the legs back until they click into place. Please ensure the legs are fully inserted into the slots. 77000IM04.
5. Push and screw in the fasteners at the top of the walker to secure the handle and legs. Attaching/Removing the Activity Panel 1. To attach the activity panel, align the bottom of the activity panel to the bottom of the walker, then push it back until the blue release lock located above the On/ Off/Volume Control switch clicks. Please ensure the activity panel is attached securely to the walker. 77000IM04.indd 6 Assembly Instructions 4.
2. To remove the activity panel, locate the blue release lock above the On/Off/ Volume Control Switch. Slide the lock up and lift the activity panel, removing it from the walker. 1. ON/OFF/VOLUME CONTROL SWITCH To turn the unit ON, slide the ON/OFF/ VOLUME CONTROL SWITCH to the LOW VOLUME ( ) or HIGH VOLUME ( ) position. To turn the unit OFF, slide the ON/OFF/ VOLUME CONTROL SWITCH to the OFF ( ) position. Product Features PRODUCT FEATURES 2. AUTOMATIC SHUT-OFF 77000IM04.
3. MODES OF PLAY Select from one of the two modes of play, including LEARNING and MUSIC, on the activity panel. Slide the on/off/volume control switch from off to either Low or High position to turn the unit on. You will hear a rooster’s call and then an upbeat nursery song. At the same time, colorful lights will flash. Slide the mode selector to the Learning Mode or Music Mode position. Activities ACTIVITIES 1.
2. In both modes, press the light-up sun button to hear upbeat melodies and fun sound effects. 4. In Learning Mode, spin the three flowers to hear fun phrases, sound effects and a melody. In Music Mode, spin the three flowers to hear fun phrases, sound effects and a melody. When a melody is playing, keep spinning the flowers to speed up the melody. After spinning freely for 2 seconds, the melody will resume normal speed. Activities 3. In both modes, pick up the phone to hear animals singing. 5.
6. In Learning Mode, press the piano keys to learn colors, numbers and animal sounds. In Music Mode, press the piano keys to play piano notes. When a melody is playing, pressing the piano keys will activate fun animal sounds on top of the melody. 7. While using the activity panel with the walker, the panel is motion-activated to play melodies and sound effects as the child pushes the walker. Activities 8.
MELODY LIST 1. Old MacDonald Had a Farm 2. The Glow Worm 3. Pop! Goes the Weasel 4. Oh Susanna! 5. Mary Had a Little Lamb 6. Hey Diddle Diddle 7. Turkey in the Straw 8. Polly Wolly Doodle 9. Alouette 11. B-I-N-G-O SUNG SONG LYRICS (Tune of “Old MacDonald Had a Farm”) Welcome to our learning farm, We have lots to show you. Shapes and colors, music, too -There’s so much to do! 77000IM04.indd 11 Activities 10.
CARE & MAINTENANCE 1. Keep the unit clean by wiping it with a slightly damp cloth. 2. Keep the unit out of direct sunlight and away from any direct heat source. 3. Remove the batteries when the unit is not in use for an extended period of time. 77000IM04.indd 12 Care & Maintenance 4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
TROUBLESHOOTING If for some reason the program/activity stops working or malfunctions, please follow these steps: 1. Please turn the unit OFF. 2. Interrupt the power supply by removing the batteries. 3. Let the unit stand for a few minutes, then replace the batteries. 4. Turn the unit ON. The unit should now be ready to play again. If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S.
IMPORTANT NOTE: Creating and developing Infant Learning® products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department at 1-800-521-2010 in the U.S.
T HIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. T HIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. Caution : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 77000IM04.
