Parent’s Guide Prance & Rock Learning Unicorn™ 91-003259-025 US CA
INTRODUCTION Thank you for purchasing the Prance & Rock Learning UnicornTM. The unicorn easily transforms from a rocker to a ride-on. The two chunky handles are easy for toddlers to grasp when riding on the unicorn. Press one of the two light-up buttons to learn about colors and to hear playful songs and imaginative phrases. Rocking or riding on the unicorn triggers the motion sensor which responds with fun melodies and sounds.
INCLUDED IN THIS PACKAGE - One Prance & Rock Learning UnicornTM Four wheels Two rockers One front link bracket Two handles One back link bracket 8 small screws One sticker sheet One parent’s guide Two plastic screws 3
WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety. NOTE: Please keep this parent’s guide as it contains important information. ATTENTION : Pour la sécurité de votre enfant, débarrassez-vous de tous les produits d’emballage tels que rubans adhésifs, feuilles de plastique, attaches, étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
BATTERY NOTICE • • • • • • • • • • • • Use new alkaline batteries for maximum performance. Use only batteries of the same or equivalent type as recommended. Do not mix different types of batteries: alkaline, standard (carbonzinc) or rechargeable, or new and used batteries. Do not use damaged batteries. Insert batteries with the correct polarity. Do not short-circuit the battery terminals. Remove exhausted batteries from the toy. Remove batteries during long periods of non-use.
Please place the stickers on the unicorn securely as indicated below: ASSEMBLY INSTRUCTIONS 1. Insert the four wheels into the two rockers as shown. You will hear the wheels click into place to indicate they are attached securely. 2. Insert the front link bracket and the back link bracket onto the inside of the rockers. Secure the brackets to the rockers with the small screws provided.
3. Insert the Prance & Rock Learning UnicornTM onto the support brackets as shown. 4. Insert the two plastic screws into the holes in the front link and back link brackets. Turn the screws clockwise to secure. You will hear the locks click into place to indicate they are attached securely. 5. Insert the two handles into the sides of the unicorn’s head. You will hear the handles click into place to indicate the handles are attached securely. Once the handles have been attached, they cannot be removed.
PRODUCT FEATURES 1. On/Off/Mode Selector To turn the unit On, slide the On/ Off/Mode selector to the Learning & Music mode or the Adventure mode position. You will hear a playful song and a friendly phrase. To turn the unit Off, slide the On/Off/ Mode selector to the Off position. 2. Volume Switch To adjust the volume, slide the Volume or the switch to the Low Volume High Volume position. 3.
2. Spinner Turn the Spinner to hear fun sounds and short tunes in both Learning & Music mode and Adventure mode. The lights and horn will flash with the sounds. 3. Motion Sensor Rock or ride the unicorn to activate the Motion Sensor. In Learning & Music mode you will hear playful melodies. In Adventure mode you will hear a variety of fun sounds. The lights and horn will flash with the sounds. The faster you ride, the faster the lights will flash. SONG LYRICS Song 1 I’m a pretty little unicorn.
MELODY LIST 1. Bicycle Built for Two 2. A-Tisket, A-Tasket 3. Little Miss Muffet 4. Roses Are Red 5. Beautiful Dreamer 6. All The Pretty Little Horses 7. Little Robin Redbreast 8. Riddle Song 9. White Coral Bells 10. Ring Around the Rosie CARE & MAINTENANCE 1. Keep the unit clean by wiping it with a slightly damp cloth. 2. Keep the unit out of direct sunlight and away from any direct heat sources. 3. Remove the batteries when the unit is not in use for an extended period of time. 4.
TROUBLESHOOTING If for some reason the program or activity stops working or malfunctions, please follow these steps: Please turn the unit OFF. Interrupt the power supply by removing the batteries. Let the unit stand for a few minutes, then replace the batteries. Turn the unit ON. The unit should now be ready to play with again. If the product still does not work, replace with an entire new set of batteries. If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S.
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
TM & © 2018 VTech Holdings Limited. All rights reserved. Printed in China.
