Parent’s Guide Shimmering Seashell Castle™ 91-003390-002 US
INTRODUCTION Thank you for purchasing the VTech ® Go! Go! Smart Friends® Shimmering Seashell CastleTM! Watch Pearl the mermaid come to life when you place her on the three MagicPoint® locations as you explore the wonders under the sea.
INCLUDED IN THIS PACKAGE NOTE: This toy is not intended for teething. This toy is not intended for play in water.
• One 2nd floor base with dressing room MagicPoint® • One 1st floor base with ballroom MagicPoint® • One double pillar • One starfish chandelier • One swing • One sea slide • One sea weed • One star • One carousel pillar • One carousel animals 444
• Accessories • One label sheet Unlock the packaging lock: There is one packaging lock located on the character. 1 Use a coin or screwdriver to loosen the screw. 2 Pull out the screw with the packaging lock and discard them. Unlock the packaging lock: 1 Turn the packaging lock counterclockwise several times. 2 Pull out and discard the packaging lock.
ATTENTION Pour la sécurité de votre enfant, débarrassez-vous de tous les produits d’emballage tels que rubans adhésifs, feuilles de plastique, attaches, étiquettes et vis d’emballage. Ils ne font pas partie du jouet. NOTE: Il est conseillé de conserver ce guide des parents car il comporte des informations importantes. GETTING STARTED Battery Installation - Character 1. Make sure the unit is OFF. 2. Locate the battery cover on the bottom of the unit. Use a screwdriver to loosen the screws. 3.
• • • • • • Remove exhausted batteries from the toy. Remove batteries during long periods of non-use. Do not dispose of batteries in fire. Do not charge non-rechargeable batteries. Remove rechargeable batteries from the toy before charging (if removable). Rechargeable batteries are only to be charged under adult supervision. CAUTION: Adult assembly required. For your child’s safety, do not let your child play with the toy until it is fully assembled.
2. Insert the two Pillars into the 1st Floor Base as shown in the picture. Back View 3. Insert the Star into the 1st Floor Base as shown in the picture. 4. Insert the Back Wall into the 1st Floor Base as shown in the picture. 5. Insert Transparent Wall (A) and Transparent Wall (B) into the 1st Floor Base as shown in the picture.
6. Insert the Seashell Seat to the 2nd Floor Base as shown in the picture. 7. Insert the Castle Roof into the Castle Wall to create the big castle. 8. Insert the big castle into the 2nd Floor Base as shown in the picture. 9. Insert the Small Castle Cove into the 2nd Floor Base as shown in the picture.
.Attach the Small Castle Cove to the big castle with the Double Pillar as shown in the picture. 11. Insert the 2nd Floor Base into the two Pillars, Back Wall, Tr a n s p a r e n t Wa l l ( A ) a n d Transparent Wall (B) as shown in the picture. 12. Attach the Carousel Pillar to the Carousel Animals as shown in the picture. 13.Insert the Carousel Pillar through the Small Castle Cove and into the 2nd Floor Base as shown in the picture.
14. Insert the Starfish Chandelier into the big castle as shown in the picture. 15. Rotate the Swing and attach it to the 2nd Floor Base as shown in the picture. 16. Attach the Sea Slide to the 2nd Floor Base as shown in the picture.
LABEL APPLICATION Please securely adhere the labels to the playset as indicated below.
Position: 19 6 5 3 4 21 22 8 Please adhere the labels shown in the picture to the playset anywhere you want.
Position: 15 1 (Back) 9 (Front) 20 16 13 14 11 12 17 2 14 14 14
PRODUCT FEATURES 1. On/Off Switch The On/Off Switch is located on the bottom of the character. M B FA To turn the unit On, slide the On/ Off Switch to the On ( ) position. A To turn the unit Off, slide the On/Off R DE Switch to the Off ( ) position. I Q U I N C H I N A É EN C INE 2. Automatic Shut Off To preserve battery life, the VTech® Go! Go! Smart Friends® Character will automatically power down after several minutes without input.
2. MagicPoint® Locations Place the MagicPoint® Character on the playset’s three MagicPoint® locations to hear phrases, fun sounds, short tunes and sing-along songs. The character can also interact with other VTech® Go! Go! Smart Friends ® playsets (each sold separately). ACTIVITIES – Shimmering Seashell Castle™ 1. Seashell Seat Place the MagicPoint® Character on the Seashell Seat MagicPoint® location to hear fun sounds, short tunes, songs and watch the LightUp Shell change colors. 2.
3. Ballroom Place the MagicPoint® Character on the Ballroom MagicPoint ® location for fun sounds and songs. 4. Seashell Turn the Flower to open and close the MagicPoint® Seashell Seat. 5. Sea Animal Carousel Place the MagicPoint® Character on the Sea Animal Carousel and press the button to spin them down. 6. Crab Slider Place the MagicPoint® Character and a friend on the Ballroom MagicPoint®. Slide the Crab Slider to see the characters twirl.
7. Swing Push the MagicPoint® Character on the Swing. 8. Slide Push the MagicPoint® Character down the Slide. SONGS 1. Nice to meet you, my name’s Pearl, I love exploring my underwater world! 2. It’s fun to splash around in the sea, Come along and swim with me! 3. With a bit of magic and a whole lot of fun, Let’s have an adventure with everyone.
MELODY LIST 1. 2. 3. 4. 5. 6. Beautiful Dreamer Git Along Little Dogies Hey Diddle Diddle Listen to the Mockingbird Sailing, Sailing This Old Man CARE & MAINTENANCE 1. Keep the unit and its metal parts clean by wiping them with a slightly damp cloth. 2. Keep the unit out of direct sunlight and away from any direct heat sources. 3. Remove the batteries when the unit is not in use for an extended period of time. 4.
If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by going to our website at vtechkids.com and filling out our Contact Us form located under the Customer Support link. A service representative will be happy to help you. IMPORTANT NOTE: Creating and developing VTech® Toddler Learning products is accompanied by a responsibility that we at VTech® take very seriously.
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Register your product online at vtechkids.com/warranty. PRODUCT WARRANTY This Warranty is applicable only to the original purchaser, is non-transferable and applies only to “VTech” products or parts. This product is covered by a 3-month Warranty from the original purchase date, under normal use and service, against defective workmanship and materials.
Visit our website for more information about our products, downloads, resources and more. vtechkids.com TM & © 2017 VTech Holdings Limited. All rights reserved. Printed in China.