Parent’s Guide Take Flight Airport TM 91-003545-000 US
INTRODUCTION Thank you for purchasing the Go! Go! Smart Wheels® Take Flight Airport™ by VTech®! Watch the adventurous Airplane come to life when you fly him around the course and over the five SmartPoint® locations. Launch the Airplane into the cloud, spin around the tower, or slide the luggage up and down. Kids will have a blast while strengthening motor skills and engaging in imaginative play.
INCLUDED IN THIS PACKAGE One SmartPoint® Airplane One ramp support One airport building One airport base One fuel nozzle One ramp track One ramp track sign One launcher platform One cloud platform One launcher base One launcher ring One launcher handle 333
One wind meter track Wind meter A & B One airport tower Two ¼ straight tracks One ¼ straight track, female Two cross tracks One end track One 60° track, male One label sheet - One parent’s guide 444
WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety. NOTE: Please keep this parent’s guide as it contains important information. ATTENTION : Pour la sécurité de votre enfant, débarrassez-vous de tous les produits d’emballage tels que rubans adhésifs, feuilles de plastique, attaches, étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
GETTING STARTED BATTERY INSTALLATION Airplane 1. Make sure the unit is turned OFF. 2. Locate the battery cover on the bottom of the Airplane. Use a coin or screwdriver to loosen the screw. 3. Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. (The use of new alkaline batteries is recommended for maximum performance.) 4. Replace the battery cover and tighten the screw to secure the battery cover.
Please adhere the labels to the playset securely as indicated on the following pages below: 2 1 4 3 5 6 7 8 9 777
1 3 9 6 2 4 5 7 8 7 7 7 7 888
ASSEMBLY INSTRUCTIONS Take Flight Airport™ With the VTech® Go! Go! Smart Wheels® Take Flight Airport™, safety comes first. To ensure your child’s safety, adult assembly is required. 1. Insert the Airport Tower into the Cloud Platform, as shown below. 2. Insert the Airport Tower into the Airport Building. Then, attach the Airport Building and Fuel Nozzle to the Airport Base, as shown below. 3. Connect the Ramp Track Sign to the Ramp Track, as shown below.
4. Attach the Ramp Support to the Airport Base. Then, connect the Ramp Track to the Ramp Track Support, as shown below. 5. Attach the Launcher Ring to the Launcher Platform. Then, connect the Launcher Platform and Launcher Handle to the Launcher Base. Lastly, connect the Launcher Base to the Airport Base, as shown below.
6. Connect Wind Meter A and B. Then, attach the Wind Meter to the Wind Meter Track, as shown below. Once you’ve completed the above steps, you are ready to play! You can connect these pieces to other included track pieces or you can connect this playset to other Go! Go! Smart Wheels® playsets and tracks (each sold separately).
PRODUCT FEATURES Airplane 1. ON/OFF SWITCH To turn the unit ON, slide the On/Off Switch to the ON ( ) position. To turn the unit OFF, slide the On/Off Switch to the OFF ( ) position. 2. AUTOMATIC SHUT-OFF To preserve battery life, the VTech® Go! Go! Smart Wheels® SmartPoint ® Airplane will automatically power-down after approximately 30 seconds without input.
3. Push the Airplane to hear fun sounds and melodies. While a melody is playing, push the Airplane again to add in fun sounds on top of the melody. The light will flash with the sounds. 4. For added fun, the Airplane interacts with the Go! Go! Smart Wheels® Take Flight Airport™. Simply place the Airplane on one of the five SmartPoint® locations to see the Airplane’s light flash and to hear fun sounds, short tunes and phrases.
3. Fly around by spinning around the tower. Rotate the radar satellite to the landing ( ) icon when you are ready to land. After landing, lift the Cloud Platform to the top of the Airport Tower and make sure the satellite is turned to the flying ( ) icon. 4. For added role play, spin the wind meter, move the fuel nozzle or slide the luggage up and down. SONGS 1. Here we go flying ,round the town, , Round the town, , Round the town, Here we go flying ,round the town, On a fun little journey! 2.
MELODY LIST 1. Flying Trapeze 2. Baa, Baa, Black Sheep 3. Big Rock Candy Mountain 4. Ding Dong Bell 5. For He’s a Jolly Good Fellow 6. Mulberry Bush CARE & MAINTENANCE 1. Keep the unit clean by wiping it with a slightly damp cloth. 2. Keep the unit out of direct sunlight and away from any direct heat sources. 3. Remove the batteries when the unit is not in use for an extended period of time. 4. Do not drop the unit on a hard surface and do not expose the unit to excess moisture.
IMPORTANT NOTE: Creating and developing VTech® products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by going to our website at vtechkids.
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Visit our website for more information about our products, downloads, resources and more. vtechkids.com Read our complete warranty policy online at vtechkids.com/warranty TM & © 2018 VTech Holdings Limited. All rights reserved. Printed in China.