User Guide

EN - 14
Installation
Cordless charging stand - C4012
install charging stand for desktop
The charging stand is designed for desktop use.
Install the charging stand as shown below.
• Make sure the power adapter is securely
plugged into an outlet not controlled by
a wall switch.
CAUTIONS
Use only the supplied power adapter. The
supplied power adapter is not designed for
use in any other IT devices. Misusing it on
your other IT devices shall be prohibited.
To order a replacement, call 1-888-907-2007.
1
2
3
1 Electrical outlet not controlled by a wall switch
2 Power adapter
3 Power cord
Handset registration
Place the cordless handset on the telephone
base cradle. Handset registration happens
automatically the first time a cordless handset is
placed on the telephone base.
When the handset is successfully registered, a
confirmation tone will be heard.
Each telephone base accommodates up to
five cordless handsets. When you already have
five registered handsets, you can replace one
of them by a new handset if any one of the
five registered handsets is disconnected from
the base. For example, it is out of range, or its
battery is removed or depleted. The previous
registered handset is then deregistered from the
telephone base.
Register a handset to another telephone
base
Any CTM-C4402 handset can register to any
CTM-S2412 telephone base.
When a registered cordless handset is idle, place it
on another telephone base. This cordless handset
automatically registers to the new telephone base.