VT 9123/9126 Cordless Telephone Operations Manual

RINGER SELECTION

1. Press PROG/CHAN.

2. Press or until RINGER is displayed.

3. Press SELECT. The current selection will be

displayed, and you will hear a sample of the

selected ring.

4. Press or to select a different ring style

(there are 4), or turn the ringer OFF.

5. Press SELECT to confirm your choice.

NOTE: If the ringer is set to OFF, the display will

show “RINGER OFF” in idle mode.

TONE/PULSE SELECTION

NOTE: Your

VT 9123/9126

is factory-preset for

TONE dialing.

1. To change dialing mode, press PROG/CHAN,

2. Press or until DIAL MODE is displayed.

3. Press SELECT. The current setting is displayed.

4. Press or to change the setting.

5. Press SELECT to confirm your choice.

GETTING STARTED

SETTING UP YOUR

VT 9123/9126