Operating instructions

3
When using your telephone equipment,
basic safety precautions should always
be followed to reduce the risk of fire,
electric shock and injury to persons, in-
cluding the following:
1. Read and understand all instruc-
tions.
2. Follow all warnings and instructions
marked on the product.
3. Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
4. Do not use this product near water
(for example, near a bath tub, kitchen
sink, or swimming pool).
5. Do not place this product on an un-
stable cart, stand, or table. The prod-
uct may fall, causing serious dam-
age to the product.
6. Slots and openings in the cabinet
and the back or bottom are provided
for ventilation. To protect it from over-
heating, these openings must not be
blocked by placing the product on
the bed, sofa, rug, or other similar
surface. This product should never
be placed near or over a radiator or
heat register. This product should
not be placed in a built-in installa-
tion where proper ventilation is not
provided.
7. This product should be operated
only from the type of power source
indicated on the marking label. If
you are not sure of the type of power
supply to your home, consult your
dealer or local power company.
8. Do not allow anything to rest on the
power cord. Do not locate this prod-
uct where the cord will be abused
by persons walking on it.
9. Never push objects of any kind into
this product through cabinet slots as
they may touch dangerous voltage
points or short out parts that could
result in a risk of fire or electric
shock. Never spill liquid of any kind
on the product.
10.To reduce the risk of electric shock,
do not disassemble this product. If
service or repair work is required,
contact VTech Customer Service at
1-800-595-9511. Opening or re-
moving cabinet parts other than
specified access doors may expose
you to dangerous voltages or other
risks. Incorrect reassembling can
cause electric shock when the ap-
pliance is subsequently used.
11.Do not overload wall outlets and ex-
tension cords as this can result in
the risk of fire or electric shock.
12.Unplug this product from the wall
outlet :
A.When the power supply cord or
plug is damaged or frayed.
B.If liquid has been spilled into the
product.
C.If the product has been exposed to
rain or water.
D.If the product does not operate nor-
mally by following the operating in-
structions. Adjust only those con-
trols that are covered by the oper-
IMPORTANT SAFETY INSTRUCTIONS