User's Manual

29
Installation
Telephone base installation
This telephone can be adapted to desktop use or mount on a standard telephone wall plate.
Installation option - desktop position
Turn the telephone base over with the bottom side facing up. Insert the tabs into the grooves to afx the mounting bracket in place.
Plug the power adapter into an electrical outlet not controlled by a wall switch.
When the telephone base has been initially installed, press /SPEAKER on the telephone base. Listen for a dial tone and then
press /SPEAKER again to hang up.
1.
2.
3.
Analog cordless 1-line/2-line - A2410/CTM-A2411/A2420/CTM-A2421
Installation
CAUTION:
Use only the supplied RJ-45 cord and power adapter. RJ-45 cord is not designed for use in any other IT devices. Misuse of RJ-45 cord on your
other IT devices shall be prohibited. To order a replacement, visit our website at www.vtechhotelphones.com or call 1-888-907-2007.
Telephone wall jack
Telephone
line cord
Power
adapter
Electrical outlet not
controlled by a wall switch
RJ-45 cord
Telephone
line cord
If you have High Speed
Internet Access service,
a DSL filter (not included)
is required.
Power cord jack
RJ-45
cord