User's Manual

66
Telephone operation
Using the cordless handset and the telephone base
The cordless handset and the telephone base cannot be used on the same call. However, calls can be switched between the
cordless handset and the telephone base speakerphone.
When the cordless handset or the telephone base is in use, the TALK key on the cordless handset and the IN USE LED on the
telephone base illuminate.
Receive a call
When there is an incoming call, the telephone rings. The IN USE LED and the MESSAGE WAITING LED on the telephone base
ash, and the TALK key on the cordless handset ashes.
To answer a call using the cordless handset while it is not on the telephone base, charging base or charging stand:
On the cordless handset, press TALK or /SPEAKER. The TALK key illuminates when in use. The /SPEAKER key illuminates
when in speakerphone mode.
To answer a call using the cordless handset while it is resting on the telephone base, charging base or charging stand:
Lift the cordless handset from the telephone base, charging base or charging stand. The TALK key illuminates when in use. The
/SPEAKER key illuminates when in speakerphone mode.
To answer a call using the telephone base:
On the telephone base, press /SPEAKER. The IN USE LED and the /SPEAKER key illuminate when in use.
Place a call
To place a call using the A2410 cordless handset:
On the cordless handset, press TALK or /SPEAKER. Listen for a dial tone and then dial the desired number, or press a
Speed Dial key on the telephone base to dial a programmed number. The TALK key illuminates when in use. The /SPEAKER key
illuminates when in speakerphone mode.
To place a call using the CTM-A2411/CTM-A2411-BATT cordless handset:
On the cordless handset, press TALK or /SPEAKER. Listen for a dial tone and then dial the desired number, or press a
Speed Dial key on the telephone base or cordless handset to dial a programmed number. The TALK key illuminates when in use.
The /SPEAKER key illuminates when in speakerphone mode.
To place a call using the telephone base:
On the telephone base, press /SPEAKER. Listen for a dial tone and then dial the desired number, or press a Speed Dial key to
dial a programmed number. The IN USE LED and the /SPEAKER key illuminate when in use.
End a call
To end a call when using the cordless handset:
Press OFF on the cordless handset or place it in the telephone base, charging base or charging stand. The call ends when all
handsets hang up.
To end a call when using the telephone base:
Press /SPEAKER.
Switch a call between the cordless handset and the telephone base speakerphone
To switch a call from the cordless handset to the telephone base speakerphone, press /SPEAKER on the telephone base.
To switch a call from the telephone base speakerphone to the cordless handset which is not on the telephone base cradle,
press TALK or /SPEAKER on the cordless handset.
To switch a call from the telephone base speakerphone to the cordless handset currently on the telephone base cradle, lift the
cordless handset from the telephone base.
Share a call
A maximum of four cordless handsets or accessory Petites can be used at the same time on an external call.
To join a call:
During a call, press TALK or /SPEAKER on another cordless handset to join.
•
•
•
Analog cordless 1-line - A2410/CTM-A2411/CTM-A2411-BATT