User Manual

18
Call block
If you have subscribed to caller ID
service, you can set the telephone
to block unknown calls and certain
undesired calls. The call block list can
store up to 20 entries.
When a call is blocked, the caller will
hear a simulated busy tone for one ring
cycle. The call recipient may pick up the
call during the first ring when there is no
caller ID information. Otherwise, the call
is disconnected.
Block unknown calls
All incoming calls with unknown numbers
will be blocked.
1. Press MENU when the phone is not
in use.
2. Press q or p to select Call block
and then press SELECT.
3. Press q or p to select Calls w/o
num then press SELECT.
4. Press q or p to choose Unblock
or Block, then press SELECT. You
hear a confirmation tone.
Add a call block list entry
1. Press MENU when the phone is not
in use.
2. Press q or p to select Call block
and then press SELECT.
3. Press SELECT to choose Block list.
4. Press q or p to select Add new
entry then press SELECT.
5. When Enter number displays, use
the dialing keys to enter the number.
-OR-
Copy a number from the redial list by
pressing REDIAL and then press q,
p or REDIAL repeatedly to select a
number. Press SELECT to copy the
number.
6. Press SELECT to move on to enter
the name. The handset displays
Enter name.
7. Use the dialing keys to enter the
name. Additional key presses show
other characters of that particular
key. The first character of every word
is capitalized.
8. Press SELECT to save. You hear a
confirmation tone.
While entering names and numbers,
you can:
• Press DELETE to backspace and
erase a digit or character.
• Press and hold DELETE to erase the
entire entry.
• Press q or p to move the cursor to
the left or right.
• Press and hold PAUSE to insert a
dialing pause (for entering numbers
only).
• Press 0 to add a space (for entering
names only).
Review call block list
1. Press MENU when the phone is not
in use.
2. Press q or p to select Call block
and then press SELECT.
3. Press SELECT to choose Block list.
4. Press SELECT to choose Review.
5. Press q or p to browse through the
call block list.
Edit a call block list entry
1. Search for the desired entry in the
call block list (see Review call block
list).
2. When the desired entry appears,
press SELECT. The handset
displays Enter number and the
stored number.