User`s manual

ManualsBrandsVTech ManualsphonesDS6670-6C

DS6670-6C

DECT 6.0 cordless telephone with

DECT 6.0 cordless headset and

BLUETOOTH

wireless technology

Abridged user’s manual

Introduction

To protect our environment and conserve natural resources, this

Abridged user’s manual provides you with the basic installation and use

instructions. A limited set of features are described in abbreviated form.

Please refer to the online Complete user’s manual for a full set of installation and

operation instructions at www.vtechphones.com.

Before using this VTech product, please read Important safety instructions on

page 13 of this user’s manual.

ECO mode

This power conserving technology reduces power

consumption for optimal battery performance.

The ECO mode activates automatically during calls.

When this mode is on, the handset displays ECO.

The ENERGY STAR

program (www.energystar.gov) recognizes and

encourages the use of products that save energy and help protect our

environment. We are proud to mark this product with the ENERGY STAR

label indicating it meets the latest energy efciency guidelines.

Telephones identied with this logo have reduced noise and

interference when used with most T-coil equipped hearing aids and

cochlear implants. The TIA-1083 Compliant Logo is a trademark of

the Telecommunications Industry Association. Used under license.

Compatible with

Hearing Aid T-Coil

TIA-1083

ECO

Home 0:00:01

10:15 PM

12/18

ECO

Go to www.vtechphones.com to register your product for enhanced warranty

support and latest VTech product news.

Summary of content (16 pages)

PAGE 1
Abridged user’s manual DS6670-6C DECT 6.0 cordless telephone with DECT 6.0 cordless headset and ® BLUETOOTH wireless technology Register online to get an additional 3-month warranty! Go to www.vtechphones.com to register your product for enhanced warranty support and latest VTech product news. Compatible with Hearing Aid T-Coil T Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants.
PAGE 2
Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.
PAGE 3
THIS SIDE UP / CE CÔTÉ VERS LE HAUT Battery Pack / Bloc-piles : (2.4V Ni-MH) WARNING / AVERTISSEMENT : DO NOT BURN OR PUNCTURE BATTERIES. NE PAS INCINÉRER OU PERCER LES PILES. Made in China / Fabriqué en chine CR1232 THIS SIDE UP / CE CÔTÉ VERS LE HAUT Battery Pack / Bloc-piles : (2.4V Ni-MH) WARNING / AVERTISSEMENT : DO NOT BURN OR PUNCTURE BATTERIES. NE PAS INCINÉRER OU PERCER LES PILES.
PAGE 4
Telephone base overview Message window FIND HANDSET /PLAY/STOP /SKIP /REPEAT X/DELETE IN USE light /VOL /VOL CELL 1 ANS ON CELL 2 Handset overview CHARGE light PUSH TO TALK VOLUME/ / MENU/SELECT REDIAL/PAUSE CELL 2 OFF/CANCEL CELL 1 /HOME/FLASH VOLUME/ /CID 1 Dialing keys /auA HOLD MUTE/DELETE Headset overview Earpiece On/Off Volume/+/Rotating clip MUTE/FLASH RESET recessed button Microphone
PAGE 5
Headset attachments Earbud To remove the earbud from the headset earpiece: Hold both sides of the earbud and then pull the earbud until it separates from the earpiece. To attach the earbud to the headset earpiece: . Choose an appropriate earbud. . Press the earbud towards the earpiece until it clicks into place. Move the earbud around so that the protruding bump on the earbud is pointing towards your mouth when placed on your ear. The protruding bump on the earbud holds the headset securely in your ear.
PAGE 6
To remove the ear hook from the headset: . Hold the headset with one hand and the ear hook with your other hand. . Pull the end of the ear hook up until it separates from the rotating clip on the headset. Headband To attach the head band to the headset: . Remove any headset attachment . Attach the ear pad to the headset connected to the headset. earpiece. 3. To wear the headset on your right ear, insert the end [A] of the head band into the rotating clip [B] on the headset until it clicks into place.
PAGE 7
Cell ringer When you pair an iPhone (with iOS4.1 or above) to your DS6670, the DS6670 handsets play your iPhone’s ringer when you receive a call on your iPhone. . Press MENU when the phone is not in use. . Scroll to Bluetooth >> Press SELECT. 3. Scroll to Cell ringer >> Press SELECT. 4. Scroll to choose On or Off >> Press SELECT. Download phonebook . . 3. 4. Press MENU when the phone is not in use. Scroll to Bluetooth >> Press SELECT. Scroll to Download PB >> Press SELECT.
PAGE 8
Quiet mode You can turn on the quiet mode for a period of time. During this period, all tones (except paging tone) and call screening are muted. When you turn on the quiet mode, the answering system turns on automatically. . Press and hold when the handset is not in use. . Use the dialing keys (0-9) to enter the duration >> Press SELECT to save. • To turn off the quiet mode, press and hold when the handset is not in use.
PAGE 9
Find handset Use this feature to find all system handsets and headset. To start paging: • Press FIND HANDSET on the telephone base. All idle handsets ring and display ** Paging **. The headset rings and blinks in blue. To end paging: • Press FIND HANDSET again on the telephone base. • Press /HOME, , CANCEL or any dialing key on the handset. • Place the handset in the telephone base or charger. • Press on the headset. Do not press and hold FIND HANDSET for more than four seconds.
PAGE 10
While entering numbers and names, you can: • Press DELETE to erase a digit or character. • Press and hold DELETE to erase the entire entry. • Press or to move the cursor to the left or right. • Press and hold PAUSE to insert a dialing pause (for entering phone numbers only). • Press /auA to switch the character between upper and lower case (for entering names only). • Press 0 to add a space (for entering names only). To review and dial from the phonebook: Entries are sorted alphabetically. .
PAGE 11
Answering system settings Default settings are indicated by asterisks (*). Settings menu Description Options Call screening Set whether you hear the callers while they are leaving messages to you. On*; Off # of rings Set the number of times the telephone rings before the answering system answers. 4*; 3; 2; Toll saver; 6; 5 Remote code Set a two-digit security code to access the answering system remotely from any touch-tone telephone.
PAGE 12
To register a handset: . Place the new/non-registered handset in the telephone base. Do not place the handset in the charger. . The handset shows Registering... Please wait, then Handset X Registered and you hear a beep when the registration process completes. The registration process takes about 90 seconds to complete. You can add one more cordless headset (IS6100, purchased separately) to your telephone system. The headset must be registered with the telephone base before use. To register a headset: .
PAGE 13
• If you have changed your telephone service to digital service from a cable company or a VoIP service provider, the telephone line may need to be rewired to allow all existing telephone jacks to work. Contact your service provider for more information. The answering system does not record messages. • Make sure the answering system is on. • Make sure the memory of the answering system is not full. When the answering machine memory is full, it does not record new messages until some old messages are deleted.
PAGE 14
Operating range This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance - which can vary with the locations of the telephone base and handset, the weather, and the layout of your home or office. When the handset is out of range, the handset displays Out of range OR Base no power.
PAGE 15
Limited warranty What does this limited warranty cover? The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions.
PAGE 16
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more.