Introduction Thank you for choosing VTech GiGA5.8x, the most advanced cordless telephone operates in the 5.8GHz frequency range. Upgraded with a large colour LCD display and lots of extra features, GiGA5.8x brings convenience and pleasure to your daily communication with your loved ones. This manual is designed to familiarise you with the GiGA5.8x VT5801 Accessory Handset setup, registration and basic functions. For detailed operational instructions, please refer to your GiGA5.
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4.
Important Safety Instructions C. If the product has been exposed to rain or water. D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, because improper adjustment of other controls may result in damage. E. If the product has been dropped and the cabinet has been damaged. F. If the product exhibits a distinct change in performance. 13.
Getting Started Parts Check List 1. 2. 3. 4. 5. 6. 7. 8. 9 Handset Charger Wall Mounting Bracket Belt Clip Handset Charger Charger Wall Mounting Bracket Software CD-ROM Disc Battery Pack User's Manual Audio Patch Cable USB Cable Belt Clip Handset Charger Handset Software CD-ROM Disc User's Manual Audio Patch Cable Battery Pack USB Cable 4 91-5628-10-00_5801 HK En manualBackup.
1. 2. 3. 4. 5. 6. 7. 8. 9. Getting Started The Handset Layout Antenna Earpiece Headset Jack and Audio Patch Cable Jack (2.5mm) Soft/Select Key On/Flash Key Dialing Keys (0-9, * , #) Speakerphone Key Speakerphone LED Message Waiting /In Use/ Incoming Ringing LED 10. 11. 12. 13. 14. 15. 16. 17. Colour LCD Display 5 -Way Joystick Volume Keys Soft Key Off/Cancel Key Sound Select Key Microphone USB Cable Jack 5 91-5628-10-00_5801 HK En manualBackup.
Getting Started Setup Connecting Power to Handset Charger Because the VT5801 is an accessory Handset to the VT 5836 or VT5886, all you need to do is choose the location for your Handset Charger, and plug in the power supply into an electrical outlet. Installation and charging of Battery Pack in Handset Follow the steps below: 1. Remove the battery compartment cover by pressing on the indent and sliding downward. 2.
Battery Life A fully charged battery provides an average talk time of about 8 hours or standby time of 5 days. NOTE: Talk time and standby time may vary depending on operating conditions. Battery Indicator Ten minutes before the battery charge level gets too low to operate the Handset, an empty battery icon will start flashing, five short tones are generated, and a LOW BATTERY message is displayed.
Getting Started Registration Registering an VT5801 Handset for the first time After charging, the screen will display: Find the BASE ID Code by doing the following (Base must be OFF): 1) At the Base, press MENU. 2) Scroll down to DISPLAY BASE-ID, then press OK. 3) Enter the 15-digit Base ID Code into the Handset. If you make a mistake, move the joystick to the left ( ) to backpace or press the to erase a character. right softkey 4) Press OK to complete the registration process.
Handset Indicators Handset Icons Icon Description 123 456 Handset Number Indicator • Indicates the Handset number. It's permanently displayed at the top left corner after the Handset has found the Base. Searching for Base Indicator • Indicates that the Handset is still searching for the Base. Intercom Indicator • On steady with the extension numbers currently on an intercom call. For example, 02 indicates that the Base and Handset 2 are on intercom call.
Handset Menu Joystick Operation • • • Basic Operation • • This Handset is equipped with a 5-way navigation joystick: Left ( ), Right ( ), Up ( ), Down ( ),and In ( ). The joystick allows you to access the Handset’s advanced features and settings. Press the joystick in any direction to access the Main Menu when in idle or screen saver mode. Press joystick Left ( ), Right ( ), Up ( ), or Down ( ), to navigate though the menu screen. Press joystick In ( ) to make a selection.
Handset Menu Calls Log (dialing key 3) - review Caller ID data; select and dial from the Caller ID data or from the Redial list that accounts for the last 10 dialed phone numbers. (dialing key 4) - choose from the many preset images or Pictures download new images into the Handset to be used as your idle screen (wall paper) or assign an image to a specific phonebook directory.
Basic Operation Handset Menu Global Page from Handset • With the Intercom icon highlighted, press the joystick in or press the left soft key. • Press the joystick or to navigate to GLOBAL PAGE or press “ ” key. * • Press the joystick in or press the left soft key for confirmation. • Any registered Handset or Base can answer the global page, thus entering Intercom mode. • To end the intercom call, press OFF on the Handset or INTERCOM on the Base.
Handset Menu Adding Phonebook Entries • From the Handset idle (OFF) mode, press the joystick in any direction or press the left softkey. The Phonebook icon should be highlighted. Press the joystick in or left soft key again. • Phonebook Press NEW. • You will then be prompted to Enter Name. Use the digit keys to ‘spell’ the name. If you make a mistake, press the softkey. You can add a space between characters by pressing the 1 key. When finished, press OK.
Handset Menu • to sample the ringer options. Press OK for confirmation. NOTE: There are 8 traditional ring tones and 12 recorded personal ringers. For Recordable Ringer, please refer to page 20 for details. NOTE: If there is no need to have distinctive image, you can press SAVE now. Basic Operation • • • • If you wish to be visually alerted to calls from this number by changing to a distinctive image, press the joystick or to scroll to PICTURE : (none) .
Handset Menu — OR — Basic Operation • You can press FIND softkey, enter the first few characters of the name and then press OK to search. If you make a mistake, press softkey. The closest match, in alphabetical order, will be displayed. Once you can find the entry you want, simply press ON or SPEAKERPHONE to dial the number. Editing Phonebook Entries Following the first 2 steps in Searching for and Dialing Phonebook Entries, locate the entry you want to edit. • • Press the joystick in.
Basic Operation Handset Menu • Press the joystick in. The screen will display: • Press DELETE softkey. The screen will display: • To confirm the deletion, press YES. To exit without deleting. press NO. Calls Log With this icon highlighted, press the joystick in or left soft key to view your Caller ID and Redial options: Review CID Log Clear CID Log Review Redial Clear Redial or to highlight the desired option, then press the joystick Move the joystick in or press the left soft key.
Handset Menu Clear Redial (dialing key 4) - select this option to delete all phone numbers stored in redial memory.You will be asked Are you sure? Choosing YES clears all records. Choosing NO returns you to the previous screen. With this icon highlighted, press the joystick in or left soft key to reveal the following menu: Set Time(dialing key 2) - this option allows you to set the time to be displayed on the bottom of the idle screen.
Handset Menu Sounds& Alerts With this icon highlighted, press the joystick in or left soft key to reveal the following options: Basic Operation Ringer Control(dialing key 2) - this option allows you to change the Ringer Volume, turn the Ringer On/Off and control the Vibrating Ringer. Ringers(dialing key 3) - this option allows you to assign a new Ring Tone. You can choose one of 8 traditional ringers, and 12 musical ringers to choose from.
Handset Menu screen (wall paper) or assign a specific image to a phonebook directory in the available 50 directories. To set a wallpaper image, select the icon Pictures in the main menu. Then choose an image in one of the three (My Pictures, Images or Emotions) soft menu options. Once you have selected the image, press the key to set the image as your wallpaper. You will receive a message on the screen confirming “Wallpaper Set!” and an audio confirmation.
Ringer C.I.Y. Basic Operation You can easily record a unique ringer to be used as either your Default Ringer or for a Distinctive Ringer for assigning to a individual phonebook directory. You can either record using the provided Audio Patch Cord (not the USB cord), or simply use the Handset microphone. You are allowed to record 9 unique ringers for a maximum of 10 seconds each. Note: Your VT5801 Handset is preset with many musical (i.e.
Picture Download Download your own image ONE-TIME SOFTWARE INSTALLATION 1. Insert the enclosed Image Editor Tool CD into your personal computer. 2. You will immediately see a pop-up window giving you three options: a. Install/Uninstall the Vtech VT5801 Image Editor b. Browse the installation CD c. Visit Vtech on the web To install the software, click on the Install/Uninstall the Vtech VT5801 Image Editor icon and follow the download instructions. 3.
Picture Download -Adjust Brightness and Contrast -Adjust Color Basic Operation • Before downloading your image, make sure that the provided USB cord is correctly installed into your computer (using the large connector) and Handset (using the small connector). After you have completed the image and then your image will be editing process, press Send to Phone downloaded into the Handset.
Handset Operation Making Calls From the Handset • • Press ON (or, SPEAKERPHONE to use the Handset Speakerphone feature). Dial the phone number. -ORDial the phone number first; then press ON (or SPEAKERPHONE). Press OFF to end your call or place the Handset in charger cradle to end your call. Answering Calls • • • Press any key except OFF and the softkeys. Press OFF to end your call. -ORPlace the Handset in charger cradle to end your call.
Handset Operation MID - Mid-Range sounds enhanced (This is the recommended setting for hearing aid users) TREBLE - High Frequency sounds enhanced NATURAL - No frequency enhancement (Your Handset is preset with this selection) Advance Operation The Handset will graphically display the four modes. NOTE: The Sound Select feature can't be use when in Speakerphone or Headset talking mode.
Handset Operation Flash Function You can use your VT5801 with services such as Call Waiting. Simply press the ON/FLASH key on the Handset Conference Calling The VT5836 or VT5886 is capable of supporting conference calls with up to two registered Handsets, and the Base Unit. To enter a conference call, simply access the line with two or more extensions by pressing ON (or SPEAKERPHONE) on the Handset or SPEAKERPHONE on the Base.
Headset Accessories Your VT5801 cordless Handset is equipped with a 2.5mm Headset Jack for use with an optional accessory Headset for hands-free operation. If you choose to use the Headset option, you must obtain an optional accessory Headset, which is compatible with the VT5801. To purchase a Headset, call VTech Customer Service at 852-2776 3223. Once you have a compatible 2.5mm Headset, locate the Headset Jack on the Handset.
Maintenance Taking Care Of Your Telephone Your VT5801 cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the Handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water Your telephone can be damaged if it gets wet. Do not use the Handset outdoors in the rain, or handle it with wet hands. Do not install your Base Unit near a sink, bathtub or shower.
In Case Of Difficulty If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after trying these suggestions, call VTech Customer Service at 852-2776 3223. The Phone Doesn't Work At All • • • • Make sure the Power Cord is plugged into the electrical outlet. Make sure the telephone line cord is plugged firmly into the Base Unit and the telephone wall jack. Make sure the batteries are properly charged.
In Case Of Difficulty Your Handset vibrates or shakes when a call comes in • It is likely that your Vibrating Handset Ringer option has been set to ON. If you’d like to turn it off, see Sounds & Alerts - Ringer CONTROL. You Hear Other Calls While Using Your Phone • Disconnect your Base Unit from the telephone jack, and plug in a regular telephone. If you still hear other calls, the problem is probably in your wiring or local service. Call your local telephone company.
Technical Specifications FREQUENCY CONTROL WEIGHT Crystal controlled PLL synthesizer Handset : Charger : TRANSMIT FREQUENCY 148.5 grams (excluding battery pack) 233.2 grams POWER REQUIREMENTS Base : 5744.736-5825.952 MHz Handset : 2401.056-2482.272 MHz Handset : 2.4V 400mAh NiMH Battery Pack Charger : 6 VDC @ 300mA RECEIVE FREQUENCY Base : 2401.056-2482.272 MHz Handset: 5744.736 - 5825.
Table of Contents Introduction....................................................................................................................1 Important Safety Instructions..................................................................................2 Getting Started.............................................................................................................4 Parts Check List...........................................................................................................
US Front Back Copy.
US Front Back Copy.