User’s Manual Airport Playset © 2013 VTech Printed in China 91-002826-000 US CA
Dear Parent, Welcome to the world of Go! Go! Smart Wheels™! We’re excited you’ve decided to ride along with us and explore all that Go! Go! Smart Wheels™ has to offer. These toys have been designed to give your child a thrilling learning experience with hours and hours of fun as well. Go! Go! Smart Wheels™ features vehicles that interact with your child by lighting up, singing and talking, while teaching your child letters and vehicle names (each sold separately).
INTRODUCTION Thank you for purchasing the VTech® Go! Go! Smart Wheels™ Airport Playset learning toy! Landing pad Antenna turns to ‘fly’ airplane on cloud platform SmartPointTM vehicle location area Airplane sings, talks and lights up Fuel station Connect tracks to other Go! Go! Smart Wheels™ playsets (each sold separately) Spinning weather vane Lift-up gate Introduction Fly into learning fun with the Go! Go! Smart Wheels™ Airport Playset by VTech®.
One airport base One airport tower One control tower with antenna One fuel station platform Two supports Two fuel station base track pieces One ramp track piece Included In This Package INCLUDED IN THIS PACKAGE 3
One user’s manual WARNING: All packing materials, such as tape, plastic sheets, packaging locks and tags are not part of this toy, and should be discarded for your child’s safety. ATTENTION : Pour la sécurité de votre enfant, débarrassez-vous de tous les produits d’emballage tels que rubans adhésifs, feuilles de plastique, attaches et étiquettes. Ils ne font pas partie du jouet. NOTE: Please keep this user’s manual as it contains important information.
GETTING STARTED 1. Make sure the unit is turned OFF. 2. Locate the battery cover on the bottom of the airplane. Use a coin or a screwdriver to loosen the screw. 3. Install 2 new ‘AAA’ (AM-4/LR03) batteries following the diagram inside the battery box. (The use of new alkaline batteries is recommended for maximum performance.) 4. Replace the battery cover and tighten the screw to secure the battery cover. BATTERY NOTICE • • • • • • • • • • • • Use new alkaline batteries for maximum performance.
ASSEMBLY INSTRUCTIONS With the VTech® Go! Go! Smart Wheels™ Airport Playset, safety comes first. To ensure your child’s safety, adult assembly is required. 2. Assemble the fuel station platform: Insert the two fuel station supports into the bottom of the fuel station platform. Then insert the fuel station supports into one of the fuel station base track pieces. You will hear a loud ‘click’ sound to indicate the platform is secure. After that, attach the ramp track piece to the fuel station platform.
After the above steps, connect these pieces with the included track pieces. You can configure them into different shapes. 1. ON/OFF SWITCH To turn the airplane ON, slide the ON/ OFF SWITCH to the ON ( ) position. To turn the airplane OFF, slide the ON/OFF SWITCH to the OFF ( ) position. 2. AUTOMATIC SHUT-OFF To preserve battery life, the VTech® Go! Go! Smart Wheels™ Airplane will automatically power-down after approximately 60 seconds without input.
Press the LIGHT-UP PILOT BUTTON to hear airplane sounds, songs and phrases. The light will flash with the sounds. 3. Push the airplane to hear fun sounds and melodies. While the melody is playing, push the airplane again to add in fun sounds on top of the melody. The light will flash with the sounds. 4. For added fun, the airplane interacts with the Go! Go! Smart Wheels™ Aiport Playset.
MELODY LIST Alouette Hey Diddle Diddle My Bonnie Lies Over the Ocean Oh Where, Oh Where Has My Little Dog Gone? Skip to My Lou ABC Song SONG LYRICS SONG 1 Look at the beautiful sky. It’s a nice day for flying. Flying up, flying down! Flying all around! SONG 2 Let’s take a flight today! Fly a thousand miles away! SONG 3 Turn the antenna around! Take me off of the ground! Melody List/Song Lyrics 1. 2. 3. 4. 5. 6.
CARE & MAINTENANCE Care & Maintenance 1. Keep the unit clean by wiping it with a slightly damp cloth. 2. Keep the unit out of direct sunlight and away from any direct heat source. 3. Remove the batteries when the unit is not in use for an extended period of time. 4. Do not drop the unit on a hard surface and do not expose the unit to moisture or water.
TROUBLESHOOTING If for some reason the program/activity stops working or malfunctions, please follow these steps: 1. Turn the unit OFF. 2. Interrupt the power supply by removing the batteries. 3. Let the unit stand for a few minutes, then replace the batteries. 4. Turn the unit ON. The unit should now be ready to play again. If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a service representative will be happy to help you.
• Reorient the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
