User’s Manual Grow & Discover Tree House TM © 2013 VTech Printed in China 91-002863-000 US
INTRODUCTION Thank you for purchasing the VTech® Grow & Discover Tree House™ learning toy! FLIPPING GATES TURNING CLOCK ARM ON/OFF/VOLUME CONTROL SWITCH Introduction Learning is so much fun in the Grow & Discover Tree House™ by VTech®! Your child’s senses will be running wild as they explore and discover with ball play, shape sorting, turning gears and so much more. They will develop language and motor skills as the smart sensors teach colors, numbers and daily life concepts or just play peek-a-boo.
One electronic panel One spinning gears piece One bird Two connection poles One fabric ball track panel with fabric tent cover One ring Two front feet Two connection poles with curtains One gate Two connection sheets Three ball tracks Included In This Package INCLUDED IN THIS PACKAGE 3
One user’s manual Eleven screws WARNING: All packing materials, such as tape, plastic sheets, packaging locks and tags are not part of this toy, and should be discarded for your child’s safety. ATTENTION : Pour la sécurité de votre enfant, débarrassez-vous de tous les produits d’emballage tels que rubans adhésifs, feuilles de plastique, attaches et étiquettes. Ils ne font pas partie du jouet. NOTE: Please keep this user’s manual as it contains important information. CAUTION: Adult assembly required.
GETTING STARTED 1. Make sure the unit is turned OFF. 2. Locate the battery cover on the back of the activity panel. Use a screwdriver to loosen the screw. 3. Install 2 new “AA” (AM-3/LR6) batteries following the diagram inside the battery box. (The use of new alkaline batteries is recommended for maximum performance.) 4. Replace the battery cover and tighten the screw to secure the battery cover. BATTERY NOTICE • • • • • • • • • • • • Use new alkaline batteries for maximum performance.
ASSEMBLY INSTRUCTIONS 1. Attach the ring: Press the ring onto the electronic panel until you hear it click into place. Use a screwdriver to fasten two of the screws into the holes on the back of the unit. 2. Attach the front feet: Insert the feet into the holes on the bottom of the activity panel. Use a screwdriver to fasten three of the screws into the holes on the bottom of both the feet. 3. Attach the spinning gears: Insert the piece with the spinning gears into the bottom of the electronic panel.
5. Attach the long connection pole: Slide the long connection pole through the fabric at the bottom of the mesh ball track panel. Insert the ends of the pole into the holes in each of the support feet until you hear them click into place. 6. Attach the fabric tent cover: Insert the two poles from the fabric tent cover into the top of the round support posts until you hear them click into place. Insert the shorter connection pole into the sides of the round support posts.
. Attach the fabric tent cover to the electronic panel: Insert the remaining two poles on the fabric tent cover into the slots on the activity panel until you hear them click into place. Next attach the fabric loops on the fabric tent cover to the hooks on the back of the activity panel. 10. Attach the connection poles with the curtains: Insert the ends of the connection poles into the holes in the back of the activity panel and into the round support posts until you hear them click into place.
Disassembly Instructions Remove the connection poles 2. Remove the connection poles with the fabric curtains and the fabric tent cover: Insert a small screwdriver into the hole on the side of the round support post and push on the small button to release the fabric tent cover and the connection pole. Repeat this process with the three remaining sides. 3.
PRODUCT FEATURES To turn the unit ON, slide the ON/OFF/ VOLUME CONTROL SWITCH to the low volume ( ) or high volume ( ) position. To turn the unit OFF, slide the ON/OFF/VOLUME CONTROL SWITCH to the OFF ( ) position. 2. AUTOMATIC SHUT-OFF To preserve battery life, the VTech® Grow & Discover Tree House™ will automatically power-down after approximately 40 seconds without input. The unit can be turned on again by pressing any button. The light will flash with the sound and music. ACTIVITIES 1.
Drop the balls into the nest to learn colors, animal names and hear fun sounds. 4. Turn the clock arms to learn time concepts, fun sounds and playful melodies. 5. Turn the gears to hear silly sounds and a sung song. 6. Insert the shape sorters into the slots to hear the shape identified and a fun sound. 7. Open the gate to enjoy fun tent play with inviting phrases. Activities 3.
Open or close the peek-a-boo window to hear playful greetings, sing-along songs and silly sounds. 9. Drop the balls onto the ball track to watch them roll. MELODY LIST 1. BINGO 2. London Bridge 3. Here We Go ‘Round the Mulberry Bush 4. Mary, Mary, Quite Contrary 5. Jack and Jill Melody List 8. 6. Mary Had a Little Lamb 7. Old MacDonald Had a Farm 8. Pop! Goes the Weasel 9. Row, Row, Row Your Boat 10. Skip to My Lou 11. This Old Man 12. Three Blind Mice 13. Humpty Dumpty 14.
Sing a Song of Sixpence Three Little Kittens Hot Cross Buns Hey, Diddle Diddle Old King Cole Twinkle, Twinkle, Little Star Lullaby Rock-a-Bye, Baby Oh, Dear What Can the Matter Be? Frere Jacques SONG LYRICS SONG 1 Crawl inside and take a look, We’ll learn and play in every nook. 1-2-3-4, there’s so much to explore! SONG 2 Song Lyrics 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. Gears spin round and round, Spinning to a happy sound.
SONG 4 Climb inside, come play with me. We’ll learn and explore in our favorite tree! SONG 5 Open the window, SONG 6 Close the window, Where did you go? SONG 7 1, 2, 3, 4, open the door - let’s explore! 5,6,7,8 peek through the gate - this is great! 9, 10, let’s start again! CARE & MAINTENANCE 1. Keep the unit clean by wiping with a slightly damp cloth. 2. The plush insect and the two curtains are machine washable, please follow the care instructions on the tag. 3.
TROUBLESHOOTING If for some reason the program/activity stops working or malfunctions, please follow these steps: 1. Turn the unit OFF. 2. Interrupt the power supply by removing the batteries. 3. Let the unit stand for a few minutes, then replace the batteries. 4. Turn the unit ON. The unit should now be ready to play again. If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S.
with the manufacturer’s instructions, may cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference with radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient the receiving antenna.
