CORDLESS Troubleshooting TAGS 250 De-register and register De-register handset from the E2525, E2600B and E2555 Please take the Handset out of the Base before de-registering. Using the [SOFT] Keys on the Base, press MENU, then press the Down arrow twice until BASE SETTINGS is highlighted. Press OK, then press MUTE 3 times and FLASH twice. This will deregister the unit, please see more info to re-register. Adding Handsets / Registering Handsets Your telephone can accommodate up to 8 cordless Handsets.
The Handset provided with your telephone is automatically registered as Handset 1. Additional Handsets will be assigned numbers in the order the are registered (2, 3, 4, etc.) up to a maximum of eight. Keypad Tone Feature - Vtech Telephones When the Keypad Tone Feature is ON but the handset is OFF (i.e. in standby): You will hear loud tones being emitted through the external speaker on the back of the handset when you press any handset button except for the volume key.
button, and the [OFF] button emitted through the external speaker on the back of the handset. 2.You will not hear any tone when you press the [SOUND SELECT] button. Keypad Tone Feature When the Keypad Tone Feature is ON but the handset is OFF (i.e. in standby): You will hear loud tones being emitted through the external speaker on the back of the handset when you press any handset button except for the volume key. When the Keypad Tone Feature is ON and the handset is ON (i.e.
When the Keypad Tone Feature is ON and the Speakerphone on the handset is ON: 1.You will hear the tones from the number buttons ([0] - [9]), the [SOFTKEY] buttons (the three unnamed buttons under the display), the [XFER/INTERCOM] button, the [SPEAKER] button, the [PHONE] button, and the [OFF] button emitted through the external speaker on the back of the handset. 2.You will not hear any tone when you press the [SOUND SELECT] button. 5860 Ringer On/Melody Selection Turn Ringer On 1.
·Every call conversation cuts in and out, other end hears beeps. 1.Advise the customer that you (the rep) will place a no charge replacement order that will be shipped via UPS service, which should arrive within 14 days. Advise the customer that they will also receive a prepaid ARS label sent via US Mail to return their original unit (no charge will be incurred by the customer). 2.
· After placing the order, send an internal referral commitment to the [VTECH ARS LABEL] team for a prepaid UPS ARS Label to be sent to the customer. NOTE: DO NOT SEND THESE CUSTOMERS BACK TO THE RETAILER FOR REPLACEMENT (EVEN IF THEY ARE WITHIN THE FIRST 30 DAYS OF PURCHASE). IT IS IMPORTANT THAT YOU FOLLOW THIS PROCESS.
·Enter the 15 digit Base ID Code, located on the underside of the Base Unit. The ID Code can include numbers (0-9) and characters (*,#). ·Press OK. The Handset will display: PLEASE WAIT! ·Wait approximately 15 seconds. The Handset will display FOUND BASE. NOTE: Occasionally, it will take longer than 15 seconds for the Handset to find the Base Unit. This is normal. If the Handset displays: BASE BUSY TRY LATER, this indicates that the system is in use.
SET TIME PONER TIEMPO REGLER L'HEURE CLOCK MODE MODO RELOJ MODE HORLOGE REGISTER REGISTRAR REGISTRE RINGER VOLUME TIMBRE VOLUMEN SONNERIE VOLUME RINGER MELODY TIPO DE TIMBRE SONNERIE MELODIE VIBRATE CONTROL CTRL VIBRACION MODE VIBRATION LOW BATT TONE TONO DE BAT BAJA SON PILE FAIBLE RANGE TONE TONO DE RANGO SON DE PORTEE KEYPAD TONE TONO DE DECLADO SON DU CLAVIER CONTRAST CONTRASTE CONTRASTE LANGUAGE IDIOMA LANGUE TO CHANGE HANDSET MENU FROM SPANISH: Press MENU. Scroll down to CONFIG AURICULAR. Press OK.
FRENCH CALLS LOG GUEA DE LLAMADAS REGISTRE D'APPEL BASE SETTINGS CONFIG BASE REGLAGES BASE DISPLAY BASE-ID NUMERO DE BASE NUMERO DE BASE RINGER VOLUME TIMBRE VOLUMEN SONNERIE VOLUME RINGER MELODY TIPO DE TIMBRE SONNERIE MELODIE KEYPAD TONE TONO DE DECLADO SON DU CLAVIER TONE/PULSE TONOS/PULSOS TONALITE/IMPUL CONTRAST CONTRASTE CONTRASTE LANGUAGE IDIOMA LANGUE TO CHANGE BASE MENU FROM SPANISH: Press MENU. Scroll down to CONFIG BASE. Press OK. Scroll down to IDIOMA. Press OK.
3.Hold down [PAGE] key for 5 seconds. When the LINE IN USE light begins to flash, release the [PAGE] key. 4.The HANDSET CHARGING light will blink 5 times. Within 5 seconds from when it stops blinking, press [PAGE] once. VT2461 Mk1 DEREGISTER A SINGLE HANDSET 1.Unplug power from the Base. Remove spare battery pack. 2.Hold down [PAGE] while reconnecting power. When the POWER light begins to blink, release the [PAGE] key. 3.Press [PAGE] 1 to 4 times, corresponding to the Handset you wish to deregister. 4.
- Advise the customer that you are sending him or her a brand new replacement set (Cordless 2230 or 2255 whichever the customer has). If the customer does not want the replacement, advise him or her to return their unit to the place of purchase. Stop! If the customer accepts the replacement 2230/2255 continue.... - Inform the customer that he or she will receive the new replacement set(s) within 14 business days.
9.Hit "Ok". Now "line or Line In" should show up in the master volume control for Recording. Please make sure that there is a check mark in the Select box under the "Line or Line IN 10.Go to Options and Select Properties. 11.There should be an option to adjust Recording or playback volume control. Choose Playback. 12.There is another section under playback where you pick which volume controls you want to show on the bar. Make sure there is a check next to "line or Line in". If there is not, please check it.
of line voltage available at the phone and the distance of miles between the two other parties. Customer may consider 3-way calling service (if available through local telco) as alternative. Customer is less likely to experience volume loss due to more direct routing of conference. Caller Id after 2nd ring Most Telco's send out the Caller ID information between the 1st and 2nd ring. Some Telco's send out this information later.
This cordless operates in the 900 megahertz frequency band. Radio signals in this band can penetrate small openings and reflect around obstructions more effciently than those of conventional cordless telephones. This alows the unit to operate in areas that are typically difficult for cordless phones. Your cordless telephone operates at the maximum power allowed by the Federal Communications Commission (FCC).
940101B2-7CPS2A (CRS will not accept a slash.) The battery save feature will deactivate the ring approximately 60 seconds after being set. After 60 seconds, the phone will enter "sleep mode". The phone will not ring or display "incoming call" when the extension phones are ringing. If any button on the phone is pressed, this will "wake up" the phone. If there is an incoming call within 60 seconds of a button being pressed, the phone will ring.
·If possible advise your callers to leave a message. ·Check with the local telephone company and advise them 7-10 seconds of silence is required for the answering system to disconnect. NOTE: Charges may apply Call Waiting disconnects answering system Answering System senses a fluctuation in line voltage caused by the Call Waiting signal and disconnects. Contact Local Telephone Company for possible solutions.
Calling in same Area Code Many LTCO's are changing their dialing sequence to 0 +, or 1 +, 10-digit dialing (0 + 0r 1 + area code + seven-digit phone number) for all long distance calls that are made within the same area code. All 0 +, or 1 +, 7-digit dialing within the same area code will be eliminated. This also means that local credit card and operator assistance calls that traditionally have been 0 + 7 dialed calls will now require 0 + 10 dialing.
5.Replace battery cover. 6.Recradle handset in base for 15 seconds. 7.Pick up handset and press phone. NOTE: Be sure batteries have been charged recently. If not, charge batteries fully for 16 hours. Common Cure If the unit does not seem to be responding normally, then try putting the handset in the base to reinitialize the unit. If it still does not seem to respond after doing this a few times, do the following (in the order listed): 1.Unplug the power cord. 2.Remove the handset battery. 3.
To determine if telephones ring separately or together: 1.Remove telephones from line. 2.Replace one at a time. ·Line 1 has a higher pitched ring that helps differentiate it from the ring of Line 2. ·Have someone call on each line. ·Let the telephone ring approximately five times and listen to the difference. ·Try using 2 two conductor cords or purchase a 267C adapter. ·Try a Triplex adapter and use a two cord connection. Ringer Volume Not Adjustable Ringer volume cannot be adjusted.
. Ringer Equivalence On the bottom of each telephone or adjunct is a Ringer Equivalence. 1.Find this number for everything connected to your telephone line. 2.Add up all the numbers to get the total Ringer Equivalence. Julian Date NOTE: Contact the telephone company, if required. The Julian date for this unit is found on the bottom of the unit.
Table of Contents Introduction....................................................................................................................1 Important Safety Instructions..................................................................................2 Getting Started.............................................................................................................4 Parts Check List...........................................................................................................
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4.
Important Safety Instructions F. If the product exhibits a distinct change in performance. 13. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning. 14. Do not use the telephone to report a gas leak in the vicinity of the leak. 15. Only put the handset of your telephone next to your ear when it is in normal talk mode.
Introduction EXPAND YOUR i 5858 or i 5871 SYSTEMS. YOUR BASE WILL WORK WITH UP TO 8 HANDSETS!!! IMPORTANT: The i 5808 is an accessory handset only for use with the i 5858 or i 5871 systems. You must have one of these base units in order to use the i 5808 accessory handset. This manual is designed to familiarize you with the i 5808 accessory handset setup, registration and basic functions. For detailed operational instructions, please refer to your i 5858 or i 5871 user's manual.
Getting Started Parts Check List 1. 2. 3. 4. 5. Handset Battery Belt Clip Handset Charger Special Features Guide 6. 7. 8. 9 User's Manual VTech Phonebook Manager CD Audio Patch Cable USB Cable To purchase replacement batteries, visit us on the web at www.vtechphones.com or call VTech Communications, Inc. at 1-800-595-9511. In Canada, call VTech Telecommunications Canada Ltd. at 1-800-267-7377. NOTE: Use only VTech batteries P/N 89-1324-00-00.
Getting GettingStarted Started The Handset Layout 1 7 8 9 10 2 11 3 12 4 5 6 13 1. Earpiece 7. LCD Display 2. USB Cable Jack 8. Menu/Select Key 3. Headset Jack / Audio 9. Softkeys Patch Cable Jack (2.5mm) 10. NavKeys (Navigation Keys) 4. On/Flash Key 11. Volume Keys 5. Dialing Keys (0-9, *, #) 12. Off/Clear Key 6. Speakerphone Key 13.
Getting Started Setup Connecting Power to Handset Charger Because the i 5808 is an accessory handset to the i 5858 or i 5871system, all you need to do is choose the location for your handset charger, and plug in the power supply into an electrical outlet. MODEL: 5808 DC 9V 200mA CLASS 2 POWER SOURCE ONLY Installation and Charge of Battery in Handset 1. Remove the battery cover and place the battery in the compartment with the metal contacts aligning, as shown in the diagram. 2.
Battery Life A fully charged battery provides an average talk time of about seven hours or standby time of four days. NOTE: Talk time and standby time may vary depending on operating conditions. Battery Indicator Ten minutes before the battery charge level gets too low to operate the handset, an empty battery icon will start flashing, five short tones are generated and a Low Battery message is displayed.
Getting Started Registration Installation and Registration of Accessory Handset Your i 5808 is an accessory handset ONLY and requires either a i 5858 or i 5871 base unit to operate. Registering the i 5808 handset for the first time After charging the handset will display registration directions, which are as follows: • On the base unit, press MENU, then select REGISTER HANDSET.
Handset Indicators Handset Icons Icon Description Line In Use Indicator • On steady when an extension handset or parallel set is in use. Mute Indicator • Flashes when the handset microphone is muted. Ringer Off Indicator • is displayed when the ringer is turned off. Battery Indicator • When the handset is removed from the charger, this lets you know the level of charge in the battery, from FULL( ) to EMPTY ( ). • Cycles (low, medium, and full) when handset battery is charging.
Headset Operation Your i 5808 handset is equipped with a 2.5mm headset jack for use with an optional accessory headset for handsfree operation. If you choose to use the headset option, you must obtain an optional accessory headset, which is compatible with the i 5808. For best results, use a VTech 2.5mm headset. To purchase a headset, visit us on the web at www.vtechphones.com or call VTech Customer Service at 1-800-595-9511. Once you have a compatible 2.
Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the Handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water Your telephone can be damaged if it gets wet. Do not use the Handset outdoors in the rain, or handle it with wet hands. Do not install your Base Unit near a sink, bathtub, or shower.
In Case Of Difficulty If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after trying these suggestions, call VTech Communications at 1-800-595-9511. In Canada, call VTech Telecommunications Canada Ltd. at 1-800-267-7377. The phone doesn't work at all • • • Make sure the power cord is plugged in. Make sure the telephone line cord is plugged firmly into the base unit and the telephone wall jack.
In Case Of Difficulty Your Handset vibrates or shakes when a call comes in • It is likely that your Vibrating Handset Ringer option has been set to ON. You hear other calls while using your phone • Disconnect your Base Unit from the telephone jack, and plug in a regular telephone. If you still hear other calls, the problem is probably in your wiring or local service. Call your local telephone company.
Warranty Statement What does this limited warranty cover? • The manufacturer of this VTech product, VTech Communications, warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the product and all accessories provided by VTech in the sales package (“Product”) are free from material defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with operation instructions.
Warranty Statement How do you get warranty service? • To obtain warranty service in the United States of America, call 1-800-595-9511 for instructions regarding where to return the Product. Before calling for service, please check the user’s manual. A check of the Product controls and features may save you a service call.
FCC, ACTA and IC Regulations This equipment complies with Parts 15 of the Federal Communications Commission (FCC) rules for the United States. It also complies with regulations RSS210 and CS03 of Industry and Science Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
FCC, ACTA and IC Regulations rules. If the equipment was approved after that date, it complies with the Part 68 rules and with Technical Requirements for Connection of Equipment to the Telephone Network adopted by the Administrative Council for Terminal Attachments (ACTA). We are required to provide you with the following information. 1.
FCC, ACTA and IC Regulations 5. Hearing aid compatibility If this product is equipped with a corded or cordless handset, it is hearing aid compatible. 6. Programming/testing of emergency numbers If this product has memory dialing locations, you may choose to store police, fire department and emergency medical service telephone numbers in these locations. If you do, please keep three things in mind: a.
FCC, ACTA and IC Regulations Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electrical inspection authority or electrician as appropriate.
Technical Specifications FREQUENCY CONTROL WEIGHT Crystal controlled PLL synthesizer Handset: Charger: TRANSMIT FREQUENCY POWER REQUIREMENTS Base: 5725-5850 MHz Handset: 5725-5850 MHz Handset: 3 cell AAA 3.6V 800mAh NiMH Battery RECEIVE FREQUENCY Charger: 9V DC @200mA Base: 5725-5850 MHz Handset: 5725-5850 MHz MEMORY CHANNELS Handset: Phonebook: 100 Memory locations; up to 32 digits, 16 characters per location. 95 Channels SIZE Handset: Charger: Caller ID: 190mm x 42mm x 31mm 87.0mmx90.
VTECH TELECOMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications Inc., Beaverton, Oregon, 97008 Distributed in Canada by VTech Telecommunications Canada Ltd., 7671 Alderbridge Way, Richmond, B.C. V6X 1Z9. Copyright 2005 for VTECH TELECOMMUNICATIONS LTD.
Congratulations on your purchase of this VTech product NEED HELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call Toll Free: 1-800-595-9511 In Canada, Call: 1-800-267-7377 or visit our website at www. vtechphones.
