Specifications

10
Getting started
Wall mounting
The wall mount brackets are designed for use on standard wall mount plates
only. Wall mounting is optional.
1. Plug the adapters into electrical outlets. Then plug the connector of the base
power adapter to the connector jack at the bottom of the base unit.
2. Connect the telephone line cord to the jack at the bottom of the base unit, and
the other end to the wall jack.
3. Line up the tabs on the wall mount adapters with the holes at the bottom of
the base unit/back of the handset charger. Snap the wall mount bracket rmly
in place.
4. Mount the base unit/handset charger on the wall. Position the base unit/hand-
set charger so that the mounting studs will t into the holes on the wall mount
bracket. Slide base unit/handset charger down on the mounting studs until it
locks into place.
.