Specifications

12
Basic operation
Handset operation
Making calls
• Press /FLASH (or SPEAKER to use the
hand set speakerphone feature). Dial the
phone number.
-OR-
Dial the phone number rst, then press
/FLASH (or SPEAKER).
• Press OFF to end your call or place the
handset in its base.
Answering calls
• Press /FLASH, SPEAKER or any dialing
keys.
• Press OFF to end your call or place the
handset in its base.
Adjust handset volume
The volume control is on the right edge of the
handset. During a call, press the VOLUME +
and - keys to adjust the listening volume to a
comfortable level. When you reach the maximum
or minimum setting, a double beep will sound.
NOTE: The procedure to change the volume
is the same for the handset earpiece, speaker-
phone and headset.
Flash function
You can use your i 6764 with services such as
call waiting (fee required). When you receive a
call waiting signal, press /FLASH to switch to
the new call. Press /FLASH again to switch
back to the original call.
NOTE: Use /FLASH to access other phone
company subscriber services, as described by
your provider.
Redial function
• Press REDIAL/PAUSE to display the last
telephone number dialed from the handset
(up to 32 digits). Use or to scroll
through the last ve numbers dialed. When the beginning or the end of the
redial list is reached, a double beep will sound.
• Press OFF to exit the redial review list.
• When the desired number is reached, press /FLASH or SPEAKER to
dial.
• When the desired entry displays, press DELETE to delete it. You’ll hear a
conrmation beep.
NOTE: If the redial memory is empty, and REDIAL is pressed, a double beep
will sound.