Specifications

14
Basic operation
Handset operation
Call forward
• A handset (HS1) on an external call can forward
the call to the other handset (HS2) by pressing
and holding the INTERCOM key. HS1 will ini-
tially show:
• HS2 can press /FLASH to answer the call.
NOTE: If HS2 does not answer the call in about 30
seconds, the external call will be returned to HS1
and the display will show:
If the returned call is not answered within another 30
seconds, the external call will end automatically.
Call transfer
• HS1 can transfer an external call to HS2 by pressing the INTERCOM key.
The external call is put on hold automatically.
• HS2 will ring, showing an intercom call.
• HS2 can answer the intercom call by pressing /FLASH.
• Intercom is established while the external call is still on hold. HS1 may
discuss the external call with HS2.
• When HS1 presses OFF, the external call is then transferred to HS2. CALL
TRANSFERRED will briey display on HS1.
NOTE: If there is no answer on HS2, HS1 can reconnect to the held call by press-
ing /FLASH.
Conference call
It is possible to establish a conference between
two handsets and the external line.
If HS1 already has a connection to the external
line, HS2 can join the call by pressing /FLASH,
a conference will be immediately established.
Both handsets will show:
Base operation
From the base unit, press the LOCATE HANDSET
key to locate the handsets.
• With the handset in idle, press LOCATE
HANDSET. The handsets will display:
• To end the page at the base, press LOCATE
HANDSET again.
• To end the page at the handset, press /
FLASH, SPEAKER or any dial pad key
(0-9, *, #) on handset, or press LOCATE
HANDSET base.